tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK...

According to LPUART RM, Transmission Complete Flag becomes 0 if queuing
a break character by writing 1 to CTRL[SBK], so here need to skip
waiting for transmission complete when UARTCTRL_SBK is asserted,
otherwise the kernel may stuck here.
And actually set_termios() adds transmission completion waiting to avoid
data loss or data breakage when changing the baud rate, but we don't
need to worry about this when queuing break characters.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230223093941.31790-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index e945f41b93d4384b573c0ffe279da5c50c187ba1..f9e164abf92007d60a4ab117e31e83d6b35d5fec 100644 (file)
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2240,9 +2240,15 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
        /* update the per-port timeout */
        uart_update_timeout(port, termios->c_cflag, baud);
 
-       /* wait transmit engin complete */
-       lpuart32_write(&sport->port, 0, UARTMODIR);
-       lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
+       /*
+        * LPUART Transmission Complete Flag may never be set while queuing a break
+        * character, so skip waiting for transmission complete when UARTCTRL_SBK is
+        * asserted.
+        */
+       if (!(old_ctrl & UARTCTRL_SBK)) {
+               lpuart32_write(&sport->port, 0, UARTMODIR);
+               lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
+       }
 
        /* disable transmit and receive */
        lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),