--- /dev/null
+Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
+
+Required properties:
+- compatible : "snps,dw-apb-ssi"
+- reg : The register base for the controller.
+- interrupts : One interrupt, used by the controller.
+- #address-cells : <1>, as required by generic SPI binding.
+- #size-cells : <0>, also as required by generic SPI binding.
+
+Optional properties:
+- cs-gpios : Specifies the gpio pis to be used for chipselects.
+- num-cs : The number of chipselects. If omitted, this will default to 4.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+       spi@fff00000 {
+               compatible = "snps,dw-apb-ssi";
+               reg = <0xfff00000 0x1000>;
+               interrupts = <0 154 4>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               num-cs = <2>;
+               cs-gpios = <&gpio0 13 0>,
+                          <&gpio0 14 0>;
+       };
+
 
 #include <linux/spi/spi.h>
 #include <linux/scatterlist.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/of_platform.h>
 
 #include "spi-dw.h"
 
        struct dw_spi *dws;
        struct resource *mem;
        int ret;
+       int num_cs;
 
        dwsmmio = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_mmio),
                        GFP_KERNEL);
                return ret;
 
        dws->bus_num = pdev->id;
-       dws->num_cs = 4;
+
        dws->max_freq = clk_get_rate(dwsmmio->clk);
 
+       num_cs = 4;
+
+       if (pdev->dev.of_node)
+               of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
+
+       dws->num_cs = num_cs;
+
        if (pdev->dev.of_node) {
                int i;
 
        return 0;
 }
 
+static const struct of_device_id dw_spi_mmio_of_match[] = {
+       { .compatible = "snps,dw-apb-ssi", },
+       { /* end of table */}
+};
+MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
+
 static struct platform_driver dw_spi_mmio_driver = {
        .probe          = dw_spi_mmio_probe,
        .remove         = dw_spi_mmio_remove,
        .driver         = {
                .name   = DRIVER_NAME,
                .owner  = THIS_MODULE,
+               .of_match_table = dw_spi_mmio_of_match,
        },
 };
 module_platform_driver(dw_spi_mmio_driver);