hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk

Extend aquacomputer_d5next driver to expose hardware
temperature sensors of the Aquacomputer Farbwerk RGB controller, which
communicates through a proprietary USB HID protocol.

Four temperature sensors are available. Additionally, serial number and
firmware version are exposed through debugfs.

Also, add Jack Doan to MAINTAINERS for this driver.

Signed-off-by: Jack Doan <me@jackdoan.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/YmTcrq8Gzel0zYYD@jackdesk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
index e69f718caf5b05d554f3a31c4ba0c98e0b6cf459..717e28226cde9cda46d4bcaa45935468662176ee 100644 (file)
--- a/Documentation/hwmon/aquacomputer_d5next.rst
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -6,6 +6,7 @@ Kernel driver aquacomputer-d5next
 Supported devices:
 
 * Aquacomputer D5 Next watercooling pump
+* Aquacomputer Farbwerk RGB controller
 * Aquacomputer Farbwerk 360 RGB controller
 * Aquacomputer Octo fan controller
 
@@ -32,7 +33,7 @@ better suited for userspace tools.
 The Octo exposes four temperature sensors and eight PWM controllable fans, along
 with their speed (in RPM), power, voltage and current.
 
-The Farbwerk 360 exposes four temperature sensors. Depending on the device,
+The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
 not all sysfs and debugfs entries will be available.
 
 Usage notes

diff --git a/MAINTAINERS b/MAINTAINERS
index 6d2c2dbbe01bd4bfea5b9174b40a1e7da7a2592e..7ead62833c0994a4d4b1068c435a3e9a70249d8b 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1447,6 +1447,7 @@ F:        drivers/media/i2c/aptina-pll.*
 
 AQUACOMPUTER D5 NEXT PUMP SENSOR DRIVER
 M:     Aleksa Savic <savicaleksa83@gmail.com>
+M:     Jack Doan <me@jackdoan.com>
 L:     linux-hwmon@vger.kernel.org
 S:     Maintained
 F:     Documentation/hwmon/aquacomputer_d5next.rst

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7fc3dacc471020beb3fbdaec909d00bd9c8bbb84..a001224bfb26af4aeb6d959c9f347ca7d46d0df1 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -256,13 +256,14 @@ config SENSORS_AHT10
          will be called aht10.
 
 config SENSORS_AQUACOMPUTER_D5NEXT
-       tristate "Aquacomputer D5 Next, Octo and Farbwerk 360"
+       tristate "Aquacomputer D5 Next, Octo, Farbwerk, and Farbwerk 360"
        depends on USB_HID
        select CRC16
        help
          If you say yes here you get support for sensors and fans of
          the Aquacomputer D5 Next watercooling pump, Octo fan
-         controller and Farbwerk 360 RGB controller, where available.
+         controller, Farbwerk and Farbwerk 360 RGB controllers, where
+         available.
 
          This driver can also be built as a module. If so, the module
          will be called aquacomputer_d5next.

diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index a464473bc98196301c38b749fe34596c2967454b..7d2e7279abfbf1954a9c5ea706d91bbb7eb4161f 100644 (file)
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -1,11 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk 360, Octo)
+ * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo)
  *
  * Aquacomputer devices send HID reports (with ID 0x01) every second to report
  * sensor values.
  *
  * Copyright 2021 Aleksa Savic <savicaleksa83@gmail.com>
+ * Copyright 2022 Jack Doan <me@jackdoan.com>
  */
 
 #include <linux/crc16.h>
@@ -19,14 +20,16 @@
 #include <asm/unaligned.h>
 
 #define USB_VENDOR_ID_AQUACOMPUTER     0x0c70
+#define USB_PRODUCT_ID_FARBWERK                0xf00a
 #define USB_PRODUCT_ID_D5NEXT          0xf00e
 #define USB_PRODUCT_ID_FARBWERK360     0xf010
 #define USB_PRODUCT_ID_OCTO            0xf011
 
-enum kinds { d5next, farbwerk360, octo };
+enum kinds { d5next, farbwerk, farbwerk360, octo };
 
 static const char *const aqc_device_names[] = {
        [d5next] = "d5next",
+       [farbwerk] = "farbwerk",
        [farbwerk360] = "farbwerk360",
        [octo] = "octo"
 };
@@ -69,6 +72,12 @@ static u8 secondary_ctrl_report[] = {
 #define D5NEXT_PUMP_CURRENT            112
 #define D5NEXT_FAN_CURRENT             99
 
+/* Register offsets for the Farbwerk RGB controller */
+#define FARBWERK_NUM_SENSORS           4
+#define FARBWERK_SENSOR_START          0x2f
+#define FARBWERK_SENSOR_SIZE           0x02
+#define FARBWERK_SENSOR_DISCONNECTED   0x7FFF
+
 /* Register offsets for the Farbwerk 360 RGB controller */
 #define FARBWERK360_NUM_SENSORS                4
 #define FARBWERK360_SENSOR_START       0x32
@@ -125,7 +134,7 @@ static const char *const label_d5next_current[] = {
        "Fan current"
 };
 
-/* Labels for Farbwerk 360 and Octo temperature sensors */
+/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */
 static const char *const label_temp_sensors[] = {
        "Sensor 1",
        "Sensor 2",
@@ -319,6 +328,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
                        if (channel == 0)
                                return 0444;
                        break;
+               case farbwerk:
                case farbwerk360:
                case octo:
                        return 0444;
@@ -551,8 +561,7 @@ static const struct hwmon_chip_info aqc_chip_info = {
        .info = aqc_info,
 };
 
-static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
-                        int size)
+static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
 {
        int i, sensor_value;
        struct aqc_data *priv;
@@ -587,6 +596,17 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
                priv->current_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_CURRENT);
                priv->current_input[1] = get_unaligned_be16(data + D5NEXT_FAN_CURRENT);
                break;
+       case farbwerk:
+               /* Temperature sensor readings */
+               for (i = 0; i < FARBWERK_NUM_SENSORS; i++) {
+                       sensor_value = get_unaligned_be16(data + FARBWERK_SENSOR_START +
+                                                         i * FARBWERK_SENSOR_SIZE);
+                       if (sensor_value == FARBWERK_SENSOR_DISCONNECTED)
+                               priv->temp_input[i] = -ENODATA;
+                       else
+                               priv->temp_input[i] = sensor_value * 10;
+               }
+               break;
        case farbwerk360:
                /* Temperature sensor readings */
                for (i = 0; i < FARBWERK360_NUM_SENSORS; i++) {
@@ -733,6 +753,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
                priv->voltage_label = label_d5next_voltages;
                priv->current_label = label_d5next_current;
                break;
+       case USB_PRODUCT_ID_FARBWERK:
+               priv->kind = farbwerk;
+
+               priv->temp_label = label_temp_sensors;
+               break;
        case USB_PRODUCT_ID_FARBWERK360:
                priv->kind = farbwerk360;
 
@@ -795,6 +820,7 @@ static void aqc_remove(struct hid_device *hdev)
 
 static const struct hid_device_id aqc_table[] = {
        { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_D5NEXT) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
        { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
        { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
        { }
@@ -826,4 +852,5 @@ module_exit(aqc_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Aleksa Savic <savicaleksa83@gmail.com>");
+MODULE_AUTHOR("Jack Doan <me@jackdoan.com>");
 MODULE_DESCRIPTION("Hwmon driver for Aquacomputer devices");