[media] v4l2-framework: replace g_chip_ident by g_std in the examples

The framework documentation used the g_chip_ident op as an example. This
op has been removed, so replace its use in the examples by the g_std op.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index a300b283a1a093a1b68fd2240bd8efdd270f58ac..24353ecab197f7262cb5a5ec1e361ea59f498689 100644 (file)
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -246,7 +246,6 @@ may be NULL if the subdev driver does not support anything from that category.
 It looks like this:
 
 struct v4l2_subdev_core_ops {
-       int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
        int (*log_status)(struct v4l2_subdev *sd);
        int (*init)(struct v4l2_subdev *sd, u32 val);
        ...
@@ -346,24 +345,24 @@ Afterwards the subdev module can be unloaded and sd->dev == NULL.
 
 You can call an ops function either directly:
 
-       err = sd->ops->core->g_chip_ident(sd, &chip);
+       err = sd->ops->core->g_std(sd, &norm);
 
 but it is better and easier to use this macro:
 
-       err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
+       err = v4l2_subdev_call(sd, core, g_std, &norm);
 
 The macro will to the right NULL pointer checks and returns -ENODEV if subdev
-is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_chip_ident is
-NULL, or the actual result of the subdev->ops->core->g_chip_ident ops.
+is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_std is
+NULL, or the actual result of the subdev->ops->core->g_std ops.
 
 It is also possible to call all or a subset of the sub-devices:
 
-       v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip);
+       v4l2_device_call_all(v4l2_dev, 0, core, g_std, &norm);
 
 Any subdev that does not support this ops is skipped and error results are
 ignored. If you want to check for errors use this:
 
-       err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);
+       err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_std, &norm);
 
 Any error except -ENOIOCTLCMD will exit the loop with that error. If no
 errors (except -ENOIOCTLCMD) occurred, then 0 is returned.

diff --git a/Documentation/zh_CN/video4linux/v4l2-framework.txt b/Documentation/zh_CN/video4linux/v4l2-framework.txt
index 44c1d934c4e3d1e0aceb48b22d9328d1bd6f8410..0da95dbaef341e08daa9033e4cf9a5d906804130 100644 (file)
--- a/Documentation/zh_CN/video4linux/v4l2-framework.txt
+++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt
@@ -247,7 +247,6 @@ i2c_client 结构体，i2c_set_clientdata() 函数可用于保存一个 v4l2_sub
 这些结构体定义如下：
 
 struct v4l2_subdev_core_ops {
-       int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
        int (*log_status)(struct v4l2_subdev *sd);
        int (*init)(struct v4l2_subdev *sd, u32 val);
        ...
@@ -337,24 +336,24 @@ subdev->dev 域就指向了 v4l2_device。
 
 注册之设备后，可通过以下方式直接调用其操作函数：
 
-       err = sd->ops->core->g_chip_ident(sd, &chip);
+       err = sd->ops->core->g_std(sd, &norm);
 
 但使用如下宏会比较容易且合适：
 
-       err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
+       err = v4l2_subdev_call(sd, core, g_std, &norm);
 
 这个宏将会做 NULL 指针检查，如果 subdev 为 NULL，则返回-ENODEV；如果
-subdev->core 或 subdev->core->g_chip_ident 为 NULL，则返回 -ENOIOCTLCMD；
-否则将返回 subdev->ops->core->g_chip_ident ops 调用的实际结果。
+subdev->core 或 subdev->core->g_std 为 NULL，则返回 -ENOIOCTLCMD；
+否则将返回 subdev->ops->core->g_std ops 调用的实际结果。
 
 有时也可能同时调用所有或一系列子设备的某个操作函数：
 
-       v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip);
+       v4l2_device_call_all(v4l2_dev, 0, core, g_std, &norm);
 
 任何不支持此操作的子设备都会被跳过，并忽略错误返回值。但如果你需要
 检查出错码，则可使用如下函数：
 
-       err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);
+       err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_std, &norm);
 
 除 -ENOIOCTLCMD 外的任何错误都会跳出循环并返回错误值。如果（除 -ENOIOCTLCMD
 外）没有错误发生，则返回 0。