USB: ehci-omap: Remove PHY regulator handling code

PHY regulator handling must be done in the PHY driver

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 0bbfdc1ee55793ab6f973d56c548abedb18c4bbd..57fe98548116d5c6c4aa128e69a454c7fcc06aa5 100644 (file)
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -43,7 +43,6 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
-#include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
@@ -112,19 +111,6 @@ static int omap_ehci_init(struct usb_hcd *hcd)
        return rc;
 }
 
-static void disable_put_regulator(
-               struct usbhs_omap_platform_data *pdata)
-{
-       int i;
-
-       for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
-               if (pdata->regulator[i]) {
-                       regulator_disable(pdata->regulator[i]);
-                       regulator_put(pdata->regulator[i]);
-               }
-       }
-}
-
 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */
 
@@ -152,7 +138,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
        int ret = -ENODEV;
        int irq;
        int i;
-       char supply[7];
        struct omap_hcd *omap;
 
        if (usb_disabled())
@@ -213,23 +198,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
                usb_phy_set_suspend(omap->phy[i], 0);
        }
 
-       /* get ehci regulator and enable */
-       for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
-               if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
-                       pdata->regulator[i] = NULL;
-                       continue;
-               }
-               snprintf(supply, sizeof(supply), "hsusb%d", i);
-               pdata->regulator[i] = regulator_get(dev, supply);
-               if (IS_ERR(pdata->regulator[i])) {
-                       pdata->regulator[i] = NULL;
-                       dev_dbg(dev,
-                       "failed to get ehci port%d regulator\n", i);
-               } else {
-                       regulator_enable(pdata->regulator[i]);
-               }
-       }
-
        pm_runtime_enable(dev);
        pm_runtime_get_sync(dev);
 
@@ -255,7 +223,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
        return 0;
 
 err_pm_runtime:
-       disable_put_regulator(pdata);
        pm_runtime_put_sync(dev);
 
 err_phy:
@@ -286,7 +253,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
        int i;
 
        usb_remove_hcd(hcd);
-       disable_put_regulator(dev->platform_data);
 
        for (i = 0; i < omap->nports; i++) {
                if (omap->phy[i])