--- /dev/null
+/*
+ * Copyright (C) 2010 Bruno Randolf <br1@einfach.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath5k.h"
+#include "base.h"
+#include "reg.h"
+#include "debug.h"
+#include "ani.h"
+
+/**
+ * DOC: Basic ANI Operation
+ *
+ * Adaptive Noise Immunity (ANI) controls five noise immunity parameters
+ * depending on the amount of interference in the environment, increasing
+ * or reducing sensitivity as necessary.
+ *
+ * The parameters are:
+ * - "noise immunity"
+ * - "spur immunity"
+ * - "firstep level"
+ * - "OFDM weak signal detection"
+ * - "CCK weak signal detection"
+ *
+ * Basically we look at the amount of ODFM and CCK timing errors we get and then
+ * raise or lower immunity accordingly by setting one or more of these
+ * parameters.
+ * Newer chipsets have PHY error counters in hardware which will generate a MIB
+ * interrupt when they overflow. Older hardware has too enable PHY error frames
+ * by setting a RX flag and then count every single PHY error. When a specified
+ * threshold of errors has been reached we will raise immunity.
+ * Also we regularly check the amount of errors and lower or raise immunity as
+ * necessary.
+ */
+
+
+/*** ANI parameter control ***/
+
+/**
+ * ath5k_ani_set_noise_immunity_level() - Set noise immunity level
+ *
+ * @level: level between 0 and @ATH5K_ANI_MAX_NOISE_IMM_LVL
+ */
+void
+ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level)
+{
+ /* TODO:
+ * ANI documents suggest the following five levels to use, but the HAL
+ * and ath9k use only use the last two levels, making this
+ * essentially an on/off option. There *may* be a reason for this (???),
+ * so i stick with the HAL version for now...
+ */
+#if 0
+ const s8 hi[] = { -18, -18, -16, -14, -12 };
+ const s8 lo[] = { -52, -56, -60, -64, -70 };
+ const s8 sz[] = { -34, -41, -48, -55, -62 };
+ const s8 fr[] = { -70, -72, -75, -78, -80 };
+#else
+ const s8 sz[] = { -55, -62 };
+ const s8 lo[] = { -64, -70 };
+ const s8 hi[] = { -14, -12 };
+ const s8 fr[] = { -78, -80 };
+#endif
+ if (level < 0 || level > ARRAY_SIZE(sz)) {
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "level out of range %d", level);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_TOT, sz[level]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_AGCCOARSE,
+ AR5K_PHY_AGCCOARSE_LO, lo[level]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_AGCCOARSE,
+ AR5K_PHY_AGCCOARSE_HI, hi[level]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG,
+ AR5K_PHY_SIG_FIRPWR, fr[level]);
+
+ ah->ah_sc->ani_state.noise_imm_level = level;
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level);
+}
+
+
+/**
+ * ath5k_ani_set_spur_immunity_level() - Set spur immunity level
+ *
+ * @level: level between 0 and @max_spur_level (the maximum level is dependent
+ * on the chip revision).
+ */
+void
+ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level)
+{
+ const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
+
+ if (level < 0 || level > ARRAY_SIZE(val) ||
+ level > ah->ah_sc->ani_state.max_spur_level) {
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "level out of range %d", level);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+ AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, val[level]);
+
+ ah->ah_sc->ani_state.spur_level = level;
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level);
+}
+
+
+/**
+ * ath5k_ani_set_firstep_level() - Set "firstep" level
+ *
+ * @level: level between 0 and @ATH5K_ANI_MAX_FIRSTEP_LVL
+ */
+void
+ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level)
+{
+ const int val[] = { 0, 4, 8 };
+
+ if (level < 0 || level > ARRAY_SIZE(val)) {
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "level out of range %d", level);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG,
+ AR5K_PHY_SIG_FIRSTEP, val[level]);
+
+ ah->ah_sc->ani_state.firstep_level = level;
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level);
+}
+
+
+/**
+ * ath5k_ani_set_ofdm_weak_signal_detection() - Control OFDM weak signal
+ * detection
+ *
+ * @on: turn on or off
+ */
+void
+ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on)
+{
+ const int m1l[] = { 127, 50 };
+ const int m2l[] = { 127, 40 };
+ const int m1[] = { 127, 0x4d };
+ const int m2[] = { 127, 0x40 };
+ const int m2cnt[] = { 31, 16 };
+ const int m2lcnt[] = { 63, 48 };
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_M1, m1l[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_M2, m2l[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR,
+ AR5K_PHY_WEAK_OFDM_HIGH_THR_M1, m1[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR,
+ AR5K_PHY_WEAK_OFDM_HIGH_THR_M2, m2[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR,
+ AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT, m2cnt[on]);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT, m2lcnt[on]);
+
+ if (on)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
+ AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN);
+
+ ah->ah_sc->ani_state.ofdm_weak_sig = on;
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "turned %s",
+ on ? "on" : "off");
+}
+
+
+/**
+ * ath5k_ani_set_cck_weak_signal_detection() - control CCK weak signal detection
+ *
+ * @on: turn on or off
+ */
+void
+ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on)
+{
+ const int val[] = { 8, 6 };
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_CCK_CROSSCORR,
+ AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR, val[on]);
+ ah->ah_sc->ani_state.cck_weak_sig = on;
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "turned %s",
+ on ? "on" : "off");
+}
+
+
+/*** ANI algorithm ***/
+
+/**
+ * ath5k_ani_raise_immunity() - Increase noise immunity
+ *
+ * @ofdm_trigger: If this is true we are called because of too many OFDM errors,
+ * the algorithm will tune more parameters then.
+ *
+ * Try to raise noise immunity (=decrease sensitivity) in several steps
+ * depending on the average RSSI of the beacons we received.
+ */
+static void
+ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as,
+ bool ofdm_trigger)
+{
+ int rssi = ah->ah_beacon_rssi_avg.avg;
+
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "raise immunity (%s)",
+ ofdm_trigger ? "ODFM" : "CCK");
+
+ /* first: raise noise immunity */
+ if (as->noise_imm_level < ATH5K_ANI_MAX_NOISE_IMM_LVL) {
+ ath5k_ani_set_noise_immunity_level(ah, as->noise_imm_level + 1);
+ return;
+ }
+
+ /* only OFDM: raise spur immunity level */
+ if (ofdm_trigger &&
+ as->spur_level < ah->ah_sc->ani_state.max_spur_level) {
+ ath5k_ani_set_spur_immunity_level(ah, as->spur_level + 1);
+ return;
+ }
+
+ /* AP mode */
+ if (ah->ah_sc->opmode == NL80211_IFTYPE_AP) {
+ if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL)
+ ath5k_ani_set_firstep_level(ah, as->firstep_level + 1);
+ return;
+ }
+
+ /* STA and IBSS mode */
+
+ /* TODO: for IBSS mode it would be better to keep a beacon RSSI average
+ * per each neighbour node and use the minimum of these, to make sure we
+ * don't shut out a remote node by raising immunity too high. */
+
+ if (rssi > ATH5K_ANI_RSSI_THR_HIGH) {
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "beacon RSSI high");
+ /* only OFDM: beacon RSSI is high, we can disable ODFM weak
+ * signal detection */
+ if (ofdm_trigger && as->ofdm_weak_sig == true) {
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, false);
+ ath5k_ani_set_spur_immunity_level(ah, 0);
+ return;
+ }
+ /* as a last resort or CCK: raise firstep level */
+ if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) {
+ ath5k_ani_set_firstep_level(ah, as->firstep_level + 1);
+ return;
+ }
+ } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) {
+ /* beacon RSSI in mid range, we need OFDM weak signal detect,
+ * but can raise firstep level */
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "beacon RSSI mid");
+ if (ofdm_trigger && as->ofdm_weak_sig == false)
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, true);
+ if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL)
+ ath5k_ani_set_firstep_level(ah, as->firstep_level + 1);
+ return;
+ } else if (ah->ah_current_channel->band == IEEE80211_BAND_2GHZ) {
+ /* beacon RSSI is low. in B/G mode turn of OFDM weak signal
+ * detect and zero firstep level to maximize CCK sensitivity */
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "beacon RSSI low, 2GHz");
+ if (ofdm_trigger && as->ofdm_weak_sig == true)
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, false);
+ if (as->firstep_level > 0)
+ ath5k_ani_set_firstep_level(ah, 0);
+ return;
+ }
+
+ /* TODO: why not?:
+ if (as->cck_weak_sig == true) {
+ ath5k_ani_set_cck_weak_signal_detection(ah, false);
+ }
+ */
+}
+
+
+/**
+ * ath5k_ani_lower_immunity() - Decrease noise immunity
+ *
+ * Try to lower noise immunity (=increase sensitivity) in several steps
+ * depending on the average RSSI of the beacons we received.
+ */
+static void
+ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as)
+{
+ int rssi = ah->ah_beacon_rssi_avg.avg;
+
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "lower immunity");
+
+ if (ah->ah_sc->opmode == NL80211_IFTYPE_AP) {
+ /* AP mode */
+ if (as->firstep_level > 0) {
+ ath5k_ani_set_firstep_level(ah, as->firstep_level - 1);
+ return;
+ }
+ } else {
+ /* STA and IBSS mode (see TODO above) */
+ if (rssi > ATH5K_ANI_RSSI_THR_HIGH) {
+ /* beacon signal is high, leave OFDM weak signal
+ * detection off or it may oscillate
+ * TODO: who said it's off??? */
+ } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) {
+ /* beacon RSSI is mid-range: turn on ODFM weak signal
+ * detection and next, lower firstep level */
+ if (as->ofdm_weak_sig == false) {
+ ath5k_ani_set_ofdm_weak_signal_detection(ah,
+ true);
+ return;
+ }
+ if (as->firstep_level > 0) {
+ ath5k_ani_set_firstep_level(ah,
+ as->firstep_level - 1);
+ return;
+ }
+ } else {
+ /* beacon signal is low: only reduce firstep level */
+ if (as->firstep_level > 0) {
+ ath5k_ani_set_firstep_level(ah,
+ as->firstep_level - 1);
+ return;
+ }
+ }
+ }
+
+ /* all modes */
+ if (as->spur_level > 0) {
+ ath5k_ani_set_spur_immunity_level(ah, as->spur_level - 1);
+ return;
+ }
+
+ /* finally, reduce noise immunity */
+ if (as->noise_imm_level > 0) {
+ ath5k_ani_set_noise_immunity_level(ah, as->noise_imm_level - 1);
+ return;
+ }
+}
+
+
+/**
+ * ath5k_hw_ani_get_listen_time() - Calculate time spent listening
+ *
+ * Return an approximation of the time spent "listening" in milliseconds (ms)
+ * since the last call of this function by deducting the cycles spent
+ * transmitting and receiving from the total cycle count.
+ * Save profile count values for debugging/statistics and because we might want
+ * to use them later.
+ *
+ * We assume no one else clears these registers!
+ */
+static int
+ath5k_hw_ani_get_listen_time(struct ath5k_hw *ah, struct ath5k_ani_state *as)
+{
+ int listen;
+
+ /* freeze */
+ ath5k_hw_reg_write(ah, AR5K_MIBC_FMC, AR5K_MIBC);
+ /* read */
+ as->pfc_cycles = ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE);
+ as->pfc_busy = ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR);
+ as->pfc_tx = ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX);
+ as->pfc_rx = ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX);
+ /* clear */
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
+ /* un-freeze */
+ ath5k_hw_reg_write(ah, 0, AR5K_MIBC);
+
+ /* TODO: where does 44000 come from? (11g clock rate?) */
+ listen = (as->pfc_cycles - as->pfc_rx - as->pfc_tx) / 44000;
+
+ if (as->pfc_cycles == 0 || listen < 0)
+ return 0;
+ return listen;
+}
+
+
+/**
+ * ath5k_ani_save_and_clear_phy_errors() - Clear and save PHY error counters
+ *
+ * Clear the PHY error counters as soon as possible, since this might be called
+ * from a MIB interrupt and we want to make sure we don't get interrupted again.
+ * Add the count of CCK and OFDM errors to our internal state, so it can be used
+ * by the algorithm later.
+ *
+ * Will be called from interrupt and tasklet context.
+ * Returns 0 if both counters are zero.
+ */
+static int
+ath5k_ani_save_and_clear_phy_errors(struct ath5k_hw *ah,
+ struct ath5k_ani_state *as)
+{
+ unsigned int ofdm_err, cck_err;
+
+ if (!ah->ah_capabilities.cap_has_phyerr_counters)
+ return 0;
+
+ ofdm_err = ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1);
+ cck_err = ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2);
+
+ /* reset counters first, we might be in a hurry (interrupt) */
+ ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_OFDM_TRIG_HIGH,
+ AR5K_PHYERR_CNT1);
+ ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_CCK_TRIG_HIGH,
+ AR5K_PHYERR_CNT2);
+
+ ofdm_err = ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - ofdm_err);
+ cck_err = ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - cck_err);
+
+ /* sometimes both can be zero, especially when there is a superfluous
+ * second interrupt. detect that here and return an error. */
+ if (ofdm_err <= 0 && cck_err <= 0)
+ return 0;
+
+ /* avoid negative values should one of the registers overflow */
+ if (ofdm_err > 0) {
+ as->ofdm_errors += ofdm_err;
+ as->sum_ofdm_errors += ofdm_err;
+ }
+ if (cck_err > 0) {
+ as->cck_errors += cck_err;
+ as->sum_cck_errors += cck_err;
+ }
+ return 1;
+}
+
+
+/**
+ * ath5k_ani_period_restart() - Restart ANI period
+ *
+ * Just reset counters, so they are clear for the next "ani period".
+ */
+static void
+ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as)
+{
+ /* keep last values for debugging */
+ as->last_ofdm_errors = as->ofdm_errors;
+ as->last_cck_errors = as->cck_errors;
+ as->last_listen = as->listen_time;
+
+ as->ofdm_errors = 0;
+ as->cck_errors = 0;
+ as->listen_time = 0;
+}
+
+
+/**
+ * ath5k_ani_calibration() - The main ANI calibration function
+ *
+ * We count OFDM and CCK errors relative to the time where we did not send or
+ * receive ("listen" time) and raise or lower immunity accordingly.
+ * This is called regularly (every second) from the calibration timer, but also
+ * when an error threshold has been reached.
+ *
+ * In order to synchronize access from different contexts, this should be
+ * called only indirectly by scheduling the ANI tasklet!
+ */
+void
+ath5k_ani_calibration(struct ath5k_hw *ah)
+{
+ struct ath5k_ani_state *as = &ah->ah_sc->ani_state;
+ int listen, ofdm_high, ofdm_low, cck_high, cck_low;
+
+ if (as->ani_mode != ATH5K_ANI_MODE_AUTO)
+ return;
+
+ /* get listen time since last call and add it to the counter because we
+ * might not have restarted the "ani period" last time */
+ listen = ath5k_hw_ani_get_listen_time(ah, as);
+ as->listen_time += listen;
+
+ ath5k_ani_save_and_clear_phy_errors(ah, as);
+
+ ofdm_high = as->listen_time * ATH5K_ANI_OFDM_TRIG_HIGH / 1000;
+ cck_high = as->listen_time * ATH5K_ANI_CCK_TRIG_HIGH / 1000;
+ ofdm_low = as->listen_time * ATH5K_ANI_OFDM_TRIG_LOW / 1000;
+ cck_low = as->listen_time * ATH5K_ANI_CCK_TRIG_LOW / 1000;
+
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "listen %d (now %d)", as->listen_time, listen);
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "check high ofdm %d/%d cck %d/%d",
+ as->ofdm_errors, ofdm_high, as->cck_errors, cck_high);
+
+ if (as->ofdm_errors > ofdm_high || as->cck_errors > cck_high) {
+ /* too many PHY errors - we have to raise immunity */
+ bool ofdm_flag = as->ofdm_errors > ofdm_high ? true : false;
+ ath5k_ani_raise_immunity(ah, as, ofdm_flag);
+ ath5k_ani_period_restart(ah, as);
+
+ } else if (as->listen_time > 5 * ATH5K_ANI_LISTEN_PERIOD) {
+ /* If more than 5 (TODO: why 5?) periods have passed and we got
+ * relatively little errors we can try to lower immunity */
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "check low ofdm %d/%d cck %d/%d",
+ as->ofdm_errors, ofdm_low, as->cck_errors, cck_low);
+
+ if (as->ofdm_errors <= ofdm_low && as->cck_errors <= cck_low)
+ ath5k_ani_lower_immunity(ah, as);
+
+ ath5k_ani_period_restart(ah, as);
+ }
+}
+
+
+/*** INTERRUPT HANDLER ***/
+
+/**
+ * ath5k_ani_mib_intr() - Interrupt handler for ANI MIB counters
+ *
+ * Just read & reset the registers quickly, so they don't generate more
+ * interrupts, save the counters and schedule the tasklet to decide whether
+ * to raise immunity or not.
+ *
+ * We just need to handle PHY error counters, ath5k_hw_update_mib_counters()
+ * should take care of all "normal" MIB interrupts.
+ */
+void
+ath5k_ani_mib_intr(struct ath5k_hw *ah)
+{
+ struct ath5k_ani_state *as = &ah->ah_sc->ani_state;
+
+ /* nothing to do here if HW does not have PHY error counters - they
+ * can't be the reason for the MIB interrupt then */
+ if (!ah->ah_capabilities.cap_has_phyerr_counters)
+ return;
+
+ /* not in use but clear anyways */
+ ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT);
+ ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT);
+
+ if (ah->ah_sc->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO)
+ return;
+
+ /* if one of the errors triggered, we can get a superfluous second
+ * interrupt, even though we have already reset the register. the
+ * function detects that so we can return early */
+ if (ath5k_ani_save_and_clear_phy_errors(ah, as) == 0)
+ return;
+
+ if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH ||
+ as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH)
+ tasklet_schedule(&ah->ah_sc->ani_tasklet);
+}
+
+
+/**
+ * ath5k_ani_phy_error_report() - Used by older HW to report PHY errors
+ *
+ * This is used by hardware without PHY error counters to report PHY errors
+ * on a frame-by-frame basis, instead of the interrupt.
+ */
+void
+ath5k_ani_phy_error_report(struct ath5k_hw *ah,
+ enum ath5k_phy_error_code phyerr)
+{
+ struct ath5k_ani_state *as = &ah->ah_sc->ani_state;
+
+ if (phyerr == AR5K_RX_PHY_ERROR_OFDM_TIMING) {
+ as->ofdm_errors++;
+ if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH)
+ tasklet_schedule(&ah->ah_sc->ani_tasklet);
+ } else if (phyerr == AR5K_RX_PHY_ERROR_CCK_TIMING) {
+ as->cck_errors++;
+ if (as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH)
+ tasklet_schedule(&ah->ah_sc->ani_tasklet);
+ }
+}
+
+
+/*** INIT ***/
+
+/**
+ * ath5k_enable_phy_err_counters() - Enable PHY error counters
+ *
+ * Enable PHY error counters for OFDM and CCK timing errors.
+ */
+static void
+ath5k_enable_phy_err_counters(struct ath5k_hw *ah)
+{
+ ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_OFDM_TRIG_HIGH,
+ AR5K_PHYERR_CNT1);
+ ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_CCK_TRIG_HIGH,
+ AR5K_PHYERR_CNT2);
+ ath5k_hw_reg_write(ah, AR5K_PHY_ERR_FIL_OFDM, AR5K_PHYERR_CNT1_MASK);
+ ath5k_hw_reg_write(ah, AR5K_PHY_ERR_FIL_CCK, AR5K_PHYERR_CNT2_MASK);
+
+ /* not in use */
+ ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT);
+ ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT);
+}
+
+
+/**
+ * ath5k_disable_phy_err_counters() - Disable PHY error counters
+ *
+ * Disable PHY error counters for OFDM and CCK timing errors.
+ */
+static void
+ath5k_disable_phy_err_counters(struct ath5k_hw *ah)
+{
+ ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT1);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT2);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT1_MASK);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT2_MASK);
+
+ /* not in use */
+ ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT);
+ ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT);
+}
+
+
+/**
+ * ath5k_ani_init() - Initialize ANI
+ * @mode: Which mode to use (auto, manual high, manual low, off)
+ *
+ * Initialize ANI according to mode.
+ */
+void
+ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode)
+{
+ /* ANI is only possible on 5212 and newer */
+ if (ah->ah_version < AR5K_AR5212)
+ return;
+
+ /* clear old state information */
+ memset(&ah->ah_sc->ani_state, 0, sizeof(ah->ah_sc->ani_state));
+
+ /* older hardware has more spur levels than newer */
+ if (ah->ah_mac_srev < AR5K_SREV_AR2414)
+ ah->ah_sc->ani_state.max_spur_level = 7;
+ else
+ ah->ah_sc->ani_state.max_spur_level = 2;
+
+ /* initial values for our ani parameters */
+ if (mode == ATH5K_ANI_MODE_OFF) {
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI off\n");
+ } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) {
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "ANI manual low -> high sensitivity\n");
+ ath5k_ani_set_noise_immunity_level(ah, 0);
+ ath5k_ani_set_spur_immunity_level(ah, 0);
+ ath5k_ani_set_firstep_level(ah, 0);
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, true);
+ ath5k_ani_set_cck_weak_signal_detection(ah, true);
+ } else if (mode == ATH5K_ANI_MODE_MANUAL_HIGH) {
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI,
+ "ANI manual high -> low sensitivity\n");
+ ath5k_ani_set_noise_immunity_level(ah,
+ ATH5K_ANI_MAX_NOISE_IMM_LVL);
+ ath5k_ani_set_spur_immunity_level(ah,
+ ah->ah_sc->ani_state.max_spur_level);
+ ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL);
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, false);
+ ath5k_ani_set_cck_weak_signal_detection(ah, false);
+ } else if (mode == ATH5K_ANI_MODE_AUTO) {
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI auto\n");
+ ath5k_ani_set_noise_immunity_level(ah, 0);
+ ath5k_ani_set_spur_immunity_level(ah, 0);
+ ath5k_ani_set_firstep_level(ah, 0);
+ ath5k_ani_set_ofdm_weak_signal_detection(ah, true);
+ ath5k_ani_set_cck_weak_signal_detection(ah, false);
+ }
+
+ /* newer hardware has PHY error counter registers which we can use to
+ * get OFDM and CCK error counts. older hardware has to set rxfilter and
+ * report every single PHY error by calling ath5k_ani_phy_error_report()
+ */
+ if (mode == ATH5K_ANI_MODE_AUTO) {
+ if (ah->ah_capabilities.cap_has_phyerr_counters)
+ ath5k_enable_phy_err_counters(ah);
+ else
+ ath5k_hw_set_rx_filter(ah, ath5k_hw_get_rx_filter(ah) |
+ AR5K_RX_FILTER_PHYERR);
+ } else {
+ if (ah->ah_capabilities.cap_has_phyerr_counters)
+ ath5k_disable_phy_err_counters(ah);
+ else
+ ath5k_hw_set_rx_filter(ah, ath5k_hw_get_rx_filter(ah) &
+ ~AR5K_RX_FILTER_PHYERR);
+ }
+
+ ah->ah_sc->ani_state.ani_mode = mode;
+}
+
+
+/*** DEBUG ***/
+
+#ifdef CONFIG_ATH5K_DEBUG
+
+void
+ath5k_ani_print_counters(struct ath5k_hw *ah)
+{
+ /* clears too */
+ printk(KERN_NOTICE "ACK fail\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_ACK_FAIL));
+ printk(KERN_NOTICE "RTS fail\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_RTS_FAIL));
+ printk(KERN_NOTICE "RTS success\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_RTS_OK));
+ printk(KERN_NOTICE "FCS error\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_FCS_FAIL));
+
+ /* no clear */
+ printk(KERN_NOTICE "tx\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX));
+ printk(KERN_NOTICE "rx\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX));
+ printk(KERN_NOTICE "busy\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR));
+ printk(KERN_NOTICE "cycles\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE));
+
+ printk(KERN_NOTICE "AR5K_PHYERR_CNT1\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1));
+ printk(KERN_NOTICE "AR5K_PHYERR_CNT2\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2));
+ printk(KERN_NOTICE "AR5K_OFDM_FIL_CNT\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT));
+ printk(KERN_NOTICE "AR5K_CCK_FIL_CNT\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT));
+}
+
+#endif
#include <linux/seq_file.h>
#include "reg.h"
+#include "ani.h"
static struct dentry *ath5k_global_debugfs;
{ ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" },
{ ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" },
{ ATH5K_DEBUG_TRACE, "trace", "trace function calls" },
+ { ATH5K_DEBUG_ANI, "ani", "adaptive noise immunity" },
{ ATH5K_DEBUG_ANY, "all", "show all debug levels" },
};
};
+/* debugfs: ani */
+
+static ssize_t read_file_ani(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_softc *sc = file->private_data;
+ struct ath5k_statistics *st = &sc->stats;
+ struct ath5k_ani_state *as = &sc->ani_state;
+
+ char buf[700];
+ unsigned int len = 0;
+
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "HW has PHY error counters:\t%s\n",
+ sc->ah->ah_capabilities.cap_has_phyerr_counters ?
+ "yes" : "no");
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "HW max spur immunity level:\t%d\n",
+ as->max_spur_level);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "\nANI state\n--------------------------------------------\n");
+ len += snprintf(buf+len, sizeof(buf)-len, "operating mode:\t\t\t");
+ switch (as->ani_mode) {
+ case ATH5K_ANI_MODE_OFF:
+ len += snprintf(buf+len, sizeof(buf)-len, "OFF\n");
+ break;
+ case ATH5K_ANI_MODE_MANUAL_LOW:
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "MANUAL LOW\n");
+ break;
+ case ATH5K_ANI_MODE_MANUAL_HIGH:
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "MANUAL HIGH\n");
+ break;
+ case ATH5K_ANI_MODE_AUTO:
+ len += snprintf(buf+len, sizeof(buf)-len, "AUTO\n");
+ break;
+ default:
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "??? (not good)\n");
+ break;
+ }
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "noise immunity level:\t\t%d\n",
+ as->noise_imm_level);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "spur immunity level:\t\t%d\n",
+ as->spur_level);
+ len += snprintf(buf+len, sizeof(buf)-len, "firstep level:\t\t\t%d\n",
+ as->firstep_level);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "OFDM weak signal detection:\t%s\n",
+ as->ofdm_weak_sig ? "on" : "off");
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "CCK weak signal detection:\t%s\n",
+ as->cck_weak_sig ? "on" : "off");
+
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "\nMIB INTERRUPTS:\t\t%u\n",
+ st->mib_intr);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "beacon RSSI average:\t%d\n",
+ sc->ah->ah_beacon_rssi_avg.avg);
+ len += snprintf(buf+len, sizeof(buf)-len, "profcnt tx\t\t%u\t(%d%%)\n",
+ as->pfc_tx,
+ as->pfc_cycles > 0 ?
+ as->pfc_tx*100/as->pfc_cycles : 0);
+ len += snprintf(buf+len, sizeof(buf)-len, "profcnt rx\t\t%u\t(%d%%)\n",
+ as->pfc_rx,
+ as->pfc_cycles > 0 ?
+ as->pfc_rx*100/as->pfc_cycles : 0);
+ len += snprintf(buf+len, sizeof(buf)-len, "profcnt busy\t\t%u\t(%d%%)\n",
+ as->pfc_busy,
+ as->pfc_cycles > 0 ?
+ as->pfc_busy*100/as->pfc_cycles : 0);
+ len += snprintf(buf+len, sizeof(buf)-len, "profcnt cycles\t\t%u\n",
+ as->pfc_cycles);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "listen time\t\t%d\tlast: %d\n",
+ as->listen_time, as->last_listen);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "OFDM errors\t\t%u\tlast: %u\tsum: %u\n",
+ as->ofdm_errors, as->last_ofdm_errors,
+ as->sum_ofdm_errors);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "CCK errors\t\t%u\tlast: %u\tsum: %u\n",
+ as->cck_errors, as->last_cck_errors,
+ as->sum_cck_errors);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "AR5K_PHYERR_CNT1\t%x\t(=%d)\n",
+ ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1),
+ ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX -
+ ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1)));
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "AR5K_PHYERR_CNT2\t%x\t(=%d)\n",
+ ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT2),
+ ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX -
+ ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT2)));
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_ani(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_softc *sc = file->private_data;
+ char buf[20];
+
+ if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
+ return -EFAULT;
+
+ if (strncmp(buf, "sens-low", 8) == 0) {
+ ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_MANUAL_HIGH);
+ } else if (strncmp(buf, "sens-high", 9) == 0) {
+ ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_MANUAL_LOW);
+ } else if (strncmp(buf, "ani-off", 7) == 0) {
+ ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_OFF);
+ } else if (strncmp(buf, "ani-on", 6) == 0) {
+ ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_AUTO);
+ } else if (strncmp(buf, "noise-low", 9) == 0) {
+ ath5k_ani_set_noise_immunity_level(sc->ah, 0);
+ } else if (strncmp(buf, "noise-high", 10) == 0) {
+ ath5k_ani_set_noise_immunity_level(sc->ah,
+ ATH5K_ANI_MAX_NOISE_IMM_LVL);
+ } else if (strncmp(buf, "spur-low", 8) == 0) {
+ ath5k_ani_set_spur_immunity_level(sc->ah, 0);
+ } else if (strncmp(buf, "spur-high", 9) == 0) {
+ ath5k_ani_set_spur_immunity_level(sc->ah,
+ sc->ani_state.max_spur_level);
+ } else if (strncmp(buf, "fir-low", 7) == 0) {
+ ath5k_ani_set_firstep_level(sc->ah, 0);
+ } else if (strncmp(buf, "fir-high", 8) == 0) {
+ ath5k_ani_set_firstep_level(sc->ah, ATH5K_ANI_MAX_FIRSTEP_LVL);
+ } else if (strncmp(buf, "ofdm-off", 8) == 0) {
+ ath5k_ani_set_ofdm_weak_signal_detection(sc->ah, false);
+ } else if (strncmp(buf, "ofdm-on", 7) == 0) {
+ ath5k_ani_set_ofdm_weak_signal_detection(sc->ah, true);
+ } else if (strncmp(buf, "cck-off", 7) == 0) {
+ ath5k_ani_set_cck_weak_signal_detection(sc->ah, false);
+ } else if (strncmp(buf, "cck-on", 6) == 0) {
+ ath5k_ani_set_cck_weak_signal_detection(sc->ah, true);
+ }
+ return count;
+}
+
+static const struct file_operations fops_ani = {
+ .read = read_file_ani,
+ .write = write_file_ani,
+ .open = ath5k_debugfs_open,
+ .owner = THIS_MODULE,
+};
+
+
/* init */
void
S_IWUSR | S_IRUSR,
sc->debug.debugfs_phydir, sc,
&fops_frameerrors);
+
+ sc->debug.debugfs_ani = debugfs_create_file("ani",
+ S_IWUSR | S_IRUSR,
+ sc->debug.debugfs_phydir, sc,
+ &fops_ani);
}
void
debugfs_remove(sc->debug.debugfs_reset);
debugfs_remove(sc->debug.debugfs_antenna);
debugfs_remove(sc->debug.debugfs_frameerrors);
+ debugfs_remove(sc->debug.debugfs_ani);
debugfs_remove(sc->debug.debugfs_phydir);
}
projects / users / dwmw2 / linux.git / commitdiff