ARM: dts: imx53-qsb: Improve the parallel display description

MX53_PAD_GPIO_1__PWM2_PWMO controls the backlight of the parallel
Seiko display and MX53_PAD_EIM_D24__GPIO3_24 controls the display power.

Reflect that in the devicetree for better description of the board.

Without these entries there is no LCD output on the Seiko display, unless
the bootloader has previously configured these pins.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
index 046254e8d7bb156f8756e16defae2bec7f67ab67..d804404464737114f9677de8e55854de051ef8ce 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
@@ -16,6 +16,13 @@
                      <0xb0000000 0x20000000>;
        };
 
+       backlight_parallel: backlight-parallel {
+               compatible = "pwm-backlight";
+               pwms = <&pwm2 0 5000000 0>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <7>;
+       };
+
        display0: disp0 {
                compatible = "fsl,imx-parallel-display";
                pinctrl-names = "default";
@@ -80,6 +87,10 @@
 
        panel {
                compatible = "sii,43wvf1g";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_display_power>;
+               backlight = <&backlight_parallel>;
+               enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
 
                port {
                        panel_in: endpoint {
@@ -194,6 +205,12 @@
                        >;
                };
 
+               pinctrl_display_power: displaypowergrp {
+                       fsl,pins = <
+                               MX53_PAD_EIM_D24__GPIO3_24              0x1e4
+                       >;
+               };
+
                pinctrl_esdhc1: esdhc1grp {
                        fsl,pins = <
                                MX53_PAD_SD1_DATA0__ESDHC1_DAT0         0x1d5
@@ -284,6 +301,12 @@
                        >;
                };
 
+               pinctrl_pwm2: pwm2grp {
+                       fsl,pins = <
+                               MX53_PAD_GPIO_1__PWM2_PWMO              0x5
+                       >;
+               };
+
                pinctrl_vga_sync: vgasync-grp {
                        fsl,pins = <
                                /* VGA_HSYNC, VSYNC with max drive strength */
@@ -359,6 +382,12 @@
        status = "okay";
 };
 
+&pwm2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm2>;
+       status = "okay";
+};
+
 &sata {
        status = "okay";
 };