*    copyright            : (C) 2001, 2002 by Frank Mori Hess
  ***************************************************************************/
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define dev_fmt pr_fmt
+#define DRV_NAME KBUILD_MODNAME
+
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/module.h>
                        retval = 0;
                        break;
                default:
-                       pr_err("tnt4882: bug! unsupported ni_chipset\n");
                        retval = 0;
                        break;
                }
                case NEC7210:
                        break;
                default:
-                       pr_err("tnt4882: bug! unsupported ni_chipset\n");
                        break;
                }
                break;
                                             test_bit(DEV_CLEAR_BN, &nec_priv->state) ||
                                             test_bit(ADR_CHANGE_BN, &nec_priv->state) ||
                                             test_bit(TIMO_NUM, &board->status))) {
-                       pr_err("tnt4882: read interrupted\n");
                        retval = -ERESTARTSYS;
                        break;
                }
                if (test_bit(TIMO_NUM, &board->status)) {
-                       //pr_info("tnt4882: minor %i read timed out\n", board->minor);
                        retval = -ETIMEDOUT;
                        break;
                }
                if (test_bit(DEV_CLEAR_BN, &nec_priv->state)) {
-                       pr_err("tnt4882: device clear interrupted read\n");
                        retval = -EINTR;
                        break;
                }
                if (test_bit(ADR_CHANGE_BN, &nec_priv->state)) {
-                       pr_err("tnt4882: address change interrupted read\n");
                        retval = -EINTR;
                        break;
                }
                                             test_bit(DEV_CLEAR_BN, &nec_priv->state) ||
                                             test_bit(ADR_CHANGE_BN, &nec_priv->state) ||
                                             test_bit(TIMO_NUM, &board->status))) {
-                       pr_err("tnt4882: read interrupted\n");
                        retval = -ERESTARTSYS;
                }
                if (test_bit(TIMO_NUM, &board->status))
-                       //pr_info("tnt4882: read timed out\n");
                        retval = -ETIMEDOUT;
-               if (test_bit(DEV_CLEAR_BN, &nec_priv->state)) {
-                       pr_err("tnt4882: device clear interrupted read\n");
+               if (test_bit(DEV_CLEAR_BN, &nec_priv->state))
                        retval = -EINTR;
-               }
-               if (test_bit(ADR_CHANGE_BN, &nec_priv->state)) {
-                       pr_err("tnt4882: address change interrupted read\n");
+               if (test_bit(ADR_CHANGE_BN, &nec_priv->state))
                        retval = -EINTR;
-               }
                count += drain_fifo_words(tnt_priv, &buffer[count], length - count);
                if (fifo_byte_available(tnt_priv) && count < length)
                        buffer[count++] = tnt_readb(tnt_priv, FIFOB);
                                     fifo_xfer_done(tnt_priv) ||
                                     test_bit(BUS_ERROR_BN, &nec_priv->state) ||
                                     test_bit(DEV_CLEAR_BN, &nec_priv->state) ||
-                                    test_bit(TIMO_NUM, &board->status))) {
-               dev_dbg(board->gpib_dev, "gpib write interrupted\n");
+                                    test_bit(TIMO_NUM, &board->status)))
                return -ERESTARTSYS;
-       }
-       if (test_bit(TIMO_NUM, &board->status)) {
-               pr_info("tnt4882: write timed out\n");
+
+       if (test_bit(TIMO_NUM, &board->status))
                return -ETIMEDOUT;
-       }
-       if (test_and_clear_bit(BUS_ERROR_BN, &nec_priv->state)) {
-               pr_err("tnt4882: write bus error\n");
+       if (test_and_clear_bit(BUS_ERROR_BN, &nec_priv->state))
                return (send_commands) ? -ENOTCONN : -ECOMM;
-       }
-       if (test_bit(DEV_CLEAR_BN, &nec_priv->state)) {
-               pr_err("tnt4882: device clear interrupted write\n");
+       if (test_bit(DEV_CLEAR_BN, &nec_priv->state))
                return -EINTR;
-       }
        return 0;
 }
 
        if (isr3_bits & HR_DONE)
                priv->imr3_bits &= ~HR_DONE;
        if (isr3_bits & (HR_INTR | HR_TLCI)) {
-               dev_dbg(board->gpib_dev, "tnt4882: minor %i isr0 0x%x imr0 0x%x isr3 0x%x imr3 0x%x\n",
+               dev_dbg(board->gpib_dev, "minor %i isr0 0x%x imr0 0x%x isr3 0x%x imr3 0x%x\n",
                        board->minor, isr0_bits, priv->imr0_bits, isr3_bits, imr3_bits);
                tnt_writeb(priv, priv->imr3_bits, IMR3);
                wake_up_interruptible(&board->wait);
        nec_priv->write_byte = nec7210_locking_iomem_write_byte;
        nec_priv->offset = atgpib_reg_offset;
 
-       if (!mite_devices) {
-               pr_err("no National Instruments PCI boards found\n");
-               return -1;
-       }
+       if (!mite_devices)
+               return -ENODEV;
 
        for (mite = mite_devices; mite; mite = mite->next) {
                short found_board;
                if (found_board)
                        break;
        }
-       if (!mite) {
-               pr_err("no NI PCI-GPIB boards found\n");
-               return -1;
-       }
+       if (!mite)
+               return -ENODEV;
+
        tnt_priv->mite = mite;
        retval = mite_setup(tnt_priv->mite);
-       if (retval < 0) {
-               pr_err("tnt4882: error setting up mite.\n");
+       if (retval < 0)
                return retval;
-       }
 
        nec_priv->mmiobase = tnt_priv->mite->daq_io_addr;
 
        // get irq
-       if (request_irq(mite_irq(tnt_priv->mite), tnt4882_interrupt, isr_flags,
-                       "ni-pci-gpib", board)) {
-               pr_err("gpib: can't request IRQ %d\n", mite_irq(tnt_priv->mite));
-               return -1;
+       retval = request_irq(mite_irq(tnt_priv->mite), tnt4882_interrupt, isr_flags, "ni-pci-gpib",
+                            board);
+       if (retval) {
+               dev_err(board->gpib_dev, "failed to obtain pci irq %d\n", mite_irq(tnt_priv->mite));
+               return retval;
        }
        tnt_priv->irq = mite_irq(tnt_priv->mite);
-       pr_info("tnt4882: irq %i\n", tnt_priv->irq);
 
        // TNT5004 detection
        switch (tnt_readb(tnt_priv, CSR) & 0xf0) {
        case 0x30:
                nec_priv->type = TNT4882;
-               pr_info("tnt4882: TNT4882 chipset detected\n");
                break;
        case 0x40:
                nec_priv->type = TNT5004;
-               pr_info("tnt4882: TNT5004 chipset detected\n");
                break;
        }
        tnt4882_init(tnt_priv, board);
 {
        *dev = pnp_find_dev(NULL, ISAPNP_VENDOR_ID_NI,
                            ISAPNP_FUNCTION(ISAPNP_ID_NI_ATGPIB_TNT), NULL);
-       if (!*dev || !(*dev)->card) {
-               pr_err("tnt4882: failed to find isapnp board\n");
+       if (!*dev || !(*dev)->card)
                return -ENODEV;
-       }
-       if (pnp_device_attach(*dev) < 0) {
-               pr_err("tnt4882: atgpib/tnt board already active, skipping\n");
+       if (pnp_device_attach(*dev) < 0)
                return -EBUSY;
-       }
        if (pnp_activate_dev(*dev) < 0) {
                pnp_device_detach(*dev);
-               pr_err("tnt4882: failed to activate() atgpib/tnt, aborting\n");
                return -EAGAIN;
        }
        if (!pnp_port_valid(*dev, 0) || !pnp_irq_valid(*dev, 0)) {
                pnp_device_detach(*dev);
-               pr_err("tnt4882: invalid port or irq for atgpib/tnt, aborting\n");
-               return -ENOMEM;
+               return -EINVAL;
        }
        return 0;
 }
        int isr_flags = 0;
        u32 iobase;
        int irq;
+       int retval;
 
        board->status = 0;
 
        // look for plug-n-play board
        if (config->ibbase == 0) {
                struct pnp_dev *dev;
-               int retval;
 
                retval = ni_isapnp_find(&dev);
                if (retval < 0)
                irq = config->ibirq;
        }
        // allocate ioports
-       if (!request_region(iobase, atgpib_iosize, "atgpib")) {
-               pr_err("tnt4882: failed to allocate ioports\n");
-               return -1;
-       }
+       if (!request_region(iobase, atgpib_iosize, "atgpib"))
+               return -EBUSY;
+
        nec_priv->mmiobase = ioport_map(iobase, atgpib_iosize);
        if (!nec_priv->mmiobase)
-               return -1;
+               return -EBUSY;
 
        // get irq
-       if (request_irq(irq, tnt4882_interrupt, isr_flags, "atgpib", board)) {
-               pr_err("gpib: can't request IRQ %d\n", irq);
-               return -1;
+       retval = request_irq(irq, tnt4882_interrupt, isr_flags, "atgpib", board);
+       if (retval) {
+               dev_err(board->gpib_dev, "failed to request ISA irq %d\n", irq);
+               return retval;
        }
        tnt_priv->irq = irq;
 
 MODULE_DEVICE_TABLE(pci, tnt4882_pci_table);
 
 static struct pci_driver tnt4882_pci_driver = {
-       .name = "tnt4882",
+       .name = DRV_NAME,
        .id_table = tnt4882_pci_table,
        .probe = &tnt4882_pci_probe
 };
 
        result = pci_register_driver(&tnt4882_pci_driver);
        if (result) {
-               pr_err("tnt4882_gpib: pci_register_driver failed: error = %d\n", result);
+               pr_err("pci_register_driver failed: error = %d\n", result);
                return result;
        }
 
        result = gpib_register_driver(&ni_isa_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_isa;
        }
 
        result = gpib_register_driver(&ni_isa_accel_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_isa_accel;
        }
 
        result = gpib_register_driver(&ni_nat4882_isa_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_nat4882_isa;
        }
 
        result = gpib_register_driver(&ni_nat4882_isa_accel_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_nat4882_isa_accel;
        }
 
        result = gpib_register_driver(&ni_nec_isa_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_nec_isa;
        }
 
        result = gpib_register_driver(&ni_nec_isa_accel_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_nec_isa_accel;
        }
 
        result = gpib_register_driver(&ni_pci_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_pci;
        }
 
        result = gpib_register_driver(&ni_pci_accel_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_pci_accel;
        }
 
 #ifdef CONFIG_GPIB_PCMCIA
        result = gpib_register_driver(&ni_pcmcia_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_pcmcia;
        }
 
        result = gpib_register_driver(&ni_pcmcia_accel_interface, THIS_MODULE);
        if (result) {
-               pr_err("tnt4882_gpib: gpib_register_driver failed: error = %d\n", result);
+               pr_err("gpib_register_driver failed: error = %d\n", result);
                goto err_pcmcia_accel;
        }
 
        result = init_ni_gpib_cs();
        if (result) {
-               pr_err("tnt4882_gpib: pcmcia_register_driver failed: error = %d\n", result);
+               pr_err("pcmcia_register_driver failed: error = %d\n", result);
                goto err_pcmcia_driver;
        }
 #endif
 
        mite_init();
-       mite_list_devices();
 
        return 0;
 
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
 
-/*
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
- * you do not define PCMCIA_DEBUG at all, all the debug code will be
- * left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
- * be present but disabled -- but it can then be enabled for specific
- * modules at load time with a 'pc_debug=#' option to insmod.
- */
-#define PCMCIA_DEBUG 1
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...)                      \
-       do {if (pc_debug > (n))                 \
-                       pr_debug(args); }       \
-       while (0)
-#else
-#define DEBUG(args...)
-#endif
-
 static int ni_gpib_config(struct pcmcia_device  *link);
 static void ni_gpib_release(struct pcmcia_device *link);
 static void ni_pcmcia_detach(gpib_board_t *board);
        struct local_info_t *info;
        //struct gpib_board_t *dev;
 
-       DEBUG(0, "%s(0x%p)\n", __func__, link);
-
        /* Allocate space for private device-specific data */
        info = kzalloc(sizeof(*info), GFP_KERNEL);
        if (!info)
        struct local_info_t *info = link->priv;
        //struct gpib_board_t *dev = info->dev;
 
-       DEBUG(0, "%s(%p)\n", __func__, link);
-
        if (info->dev)
                ni_pcmcia_detach(info->dev);
        ni_gpib_release(link);
        //gpib_board_t *dev = info->dev;
        int last_ret;
 
-       DEBUG(0, "%s(0x%p)\n", __func__, link);
-
        last_ret = pcmcia_loop_config(link, &ni_gpib_config_iteration, NULL);
        if (last_ret) {
                dev_warn(&link->dev, "no configuration found\n");
  */
 static void ni_gpib_release(struct pcmcia_device *link)
 {
-       DEBUG(0, "%s(0x%p)\n", __func__, link);
        pcmcia_disable_device(link);
 } /* ni_gpib_release */
 
 {
        //struct local_info_t *info = link->priv;
        //struct gpib_board_t *dev = info->dev;
-       DEBUG(0, "%s(0x%p)\n", __func__, link);
 
        if (link->open)
-               pr_err("Device still open ???\n");
+               dev_warn(&link->dev, "Device still open\n");
        //netif_device_detach(dev);
 
        return 0;
 {
        //struct local_info_t *info = link->priv;
        //struct gpib_board_t *dev = info->dev;
-       DEBUG(0, "%s(0x%p)\n", __func__, link);
 
        /*if (link->open) {
         *      ni_gpib_probe(dev);     / really?
-        *      printk("Gpib resumed ???\n");
         *      //netif_device_attach(dev);
         *}
         */
 
 static void __exit exit_ni_gpib_cs(void)
 {
-       DEBUG(0, "ni_gpib_cs: unloading\n");
        pcmcia_unregister_driver(&ni_gpib_cs_driver);
 }
 
        struct tnt4882_priv *tnt_priv;
        struct nec7210_priv *nec_priv;
        int isr_flags = IRQF_SHARED;
+       int retval;
 
-       DEBUG(0, "%s(0x%p)\n", __func__, board);
-
-       if (!curr_dev) {
-               pr_err("gpib: no NI PCMCIA board found\n");
-               return -1;
-       }
+       if (!curr_dev)
+               return -ENODEV;
 
        info = curr_dev->priv;
        info->dev = board;
 
        if (tnt4882_allocate_private(board))
                return -ENOMEM;
+
        tnt_priv = board->private_data;
        nec_priv = &tnt_priv->nec7210_priv;
        nec_priv->type = TNT4882;
        nec_priv->write_byte = nec7210_locking_ioport_write_byte;
        nec_priv->offset = atgpib_reg_offset;
 
-       DEBUG(0, "ioport1 window attributes: 0x%lx\n", curr_dev->resource[0]->flags);
        if (!request_region(curr_dev->resource[0]->start, resource_size(curr_dev->resource[0]),
-                           "tnt4882")) {
-               pr_err("gpib: ioports starting at 0x%lx are already in use\n",
-                      (unsigned long)curr_dev->resource[0]->start);
-               return -EIO;
-       }
+                           DRV_NAME))
+               return -ENOMEM;
 
        nec_priv->mmiobase = ioport_map(curr_dev->resource[0]->start,
                                        resource_size(curr_dev->resource[0]));
        if (!nec_priv->mmiobase)
-               return -1;
+               return -ENOMEM;
 
        // get irq
-       if (request_irq(curr_dev->irq, tnt4882_interrupt, isr_flags, "tnt4882", board)) {
-               pr_err("gpib: can't request IRQ %d\n", curr_dev->irq);
-               return -1;
+       retval = request_irq(curr_dev->irq, tnt4882_interrupt, isr_flags, DRV_NAME, board);
+       if (retval) {
+               dev_err(board->gpib_dev, "failed to obtain PCMCIA irq %d\n", curr_dev->irq);
+               return retval;
        }
        tnt_priv->irq = curr_dev->irq;
 
        struct tnt4882_priv *tnt_priv = board->private_data;
        struct nec7210_priv *nec_priv;
 
-       DEBUG(0, "%s(0x%p)\n", __func__, board);
-
        if (tnt_priv) {
                nec_priv = &tnt_priv->nec7210_priv;
                if (tnt_priv->irq)