i2c: s3c2410: use core helper to mark adapter suspended

Rejecting transfers should be handled by the core. Also, this will
ensure proper locking which was forgotten in this open coded version.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 2f2e28d60ef5246dcc870b5cf92b48d649350833..53bc021f4a5a1546157ff8d2b248742ca1907647 100644 (file)
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -104,7 +104,6 @@ enum s3c24xx_i2c_state {
 struct s3c24xx_i2c {
        wait_queue_head_t       wait;
        kernel_ulong_t          quirks;
-       unsigned int            suspended:1;
 
        struct i2c_msg          *msg;
        unsigned int            msg_num;
@@ -703,9 +702,6 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
        unsigned long timeout;
        int ret;
 
-       if (i2c->suspended)
-               return -EIO;
-
        ret = s3c24xx_i2c_set_master(i2c);
        if (ret != 0) {
                dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
@@ -1246,7 +1242,7 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev)
 {
        struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
 
-       i2c->suspended = 1;
+       i2c_mark_adapter_suspended(&i2c->adap);
 
        if (!IS_ERR(i2c->sysreg))
                regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg);
@@ -1267,7 +1263,7 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev)
                return ret;
        s3c24xx_i2c_init(i2c);
        clk_disable(i2c->clk);
-       i2c->suspended = 0;
+       i2c_mark_adapter_resumed(&i2c->adap);
 
        return 0;
 }