ARM: mxs: use debug_ll_io_init for low-level debug

The only user of the static mapping done in mx23_map_io and mx28_map_io
is low-level debug now.  Use debug_ll_io_init() instead, so that the
static mapping is used nowhere and can be removed completely later.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
index 90c6b7836ad3f8f108f708c7820f8b92a491c332..d86951551ca1b8afe31d82981b156e9b6579aed5 100644 (file)
--- a/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -11,16 +11,13 @@
  *
  */
 
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-
 #ifdef CONFIG_DEBUG_IMX23_UART
-#define UART_PADDR     MX23_DUART_BASE_ADDR
+#define UART_PADDR     0x80070000
 #elif defined (CONFIG_DEBUG_IMX28_UART)
-#define UART_PADDR     MX28_DUART_BASE_ADDR
+#define UART_PADDR     0x80074000
 #endif
 
-#define UART_VADDR     MXS_IO_ADDRESS(UART_PADDR)
+#define UART_VADDR     0xfe100000
 
                .macro  addruart, rp, rv, tmp
                ldr     \rp, =UART_PADDR        @ physical

diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index c192fd62ebef6f98bf24d616ffdc30fff48e9576..069049200eb4698186280414a5c3baf5d26161a5 100644 (file)
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -27,6 +27,7 @@
 #include <linux/phy.h>
 #include <linux/pinctrl/consumer.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 #include <mach/common.h>
@@ -507,7 +508,7 @@ static const char *imx28_dt_compat[] __initdata = {
 };
 
 DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
-       .map_io         = mx23_map_io,
+       .map_io         = debug_ll_io_init,
        .init_irq       = irqchip_init,
        .handle_irq     = icoll_handle_irq,
        .init_time      = imx23_timer_init,
@@ -517,7 +518,7 @@ DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
 MACHINE_END
 
 DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
-       .map_io         = mx28_map_io,
+       .map_io         = debug_ll_io_init,
        .init_irq       = irqchip_init,
        .handle_irq     = icoll_handle_irq,
        .init_time      = imx28_timer_init,