dt-bindings: mmc: Convert fsl-esdhc.txt to yaml

Convert layerscape fsl-esdhc binding doc from txt to yaml format.

Addtional change during convert:
- Deprecate "sdhci,wp-inverted", "sdhci,1-bit-only".
- Add "reg" and "interrupts" property.
- Change example "sdhci@2e000" to "mmc@2e000".
- Compatible string require fsl,<chip>-esdhc followed by fsl,esdhc to match
most existed dts file.
- Set clock-frequency to 100mhz in example.
- clock-frequency is not required now.
- Allow dma-coherence
- Add clocks

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240613-ls_waring_esdhc-v5-2-36644e2fe21c@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml
new file mode 100644 (file)
index 0000000..b86ffb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Enhanced Secure Digital Host Controller (eSDHC)
+
+description:
+  The Enhanced Secure Digital Host Controller provides an interface
+  for MMC, SD, and SDIO types of memory cards.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc8536-esdhc
+          - fsl,mpc8378-esdhc
+          - fsl,p2020-esdhc
+          - fsl,p4080-esdhc
+          - fsl,t1040-esdhc
+          - fsl,t4240-esdhc
+          - fsl,ls1012a-esdhc
+          - fsl,ls1028a-esdhc
+          - fsl,ls1088a-esdhc
+          - fsl,ls1043a-esdhc
+          - fsl,ls1046a-esdhc
+          - fsl,ls2080a-esdhc
+      - const: fsl,esdhc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: specifies eSDHC base clock frequency.
+
+  sdhci,wp-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      specifies that eSDHC controller reports
+      inverted write-protect state; New devices should use the generic
+      "wp-inverted" property.
+
+  sdhci,1-bit-only:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      specifies that a controller can only handle
+      1-bit data transfers. New devices should use the generic
+      "bus-width = <1>" property.
+
+  sdhci,auto-cmd12:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      specifies that a controller can only handle auto CMD12.
+
+  voltage-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: specifies minimum slot voltage (mV).
+        - description: specifies maximum slot voltage (mV).
+    minItems: 1
+    maxItems: 8
+
+  dma-coherent: true
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If the host controller is little-endian mode, specify
+      this property. The default endian mode is big-endian.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@2e000 {
+        compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
+        reg = <0x2e000 0x1000>;
+        interrupts = <42 0x8>;
+        interrupt-parent = <&ipic>;
+        /* Filled in by U-Boot */
+        clock-frequency = <100000000>;
+        voltage-ranges = <3300 3300>;
+    };

diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
deleted file mode 100644 (file)
index edb8cad..0000000
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Freescale Enhanced Secure Digital Host Controller (eSDHC)
-
-The Enhanced Secure Digital Host Controller provides an interface
-for MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the sdhci-esdhc driver.
-
-Required properties:
-  - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
-    Possible compatibles for PowerPC:
-       "fsl,mpc8536-esdhc"
-       "fsl,mpc8378-esdhc"
-       "fsl,p2020-esdhc"
-       "fsl,p4080-esdhc"
-       "fsl,t1040-esdhc"
-       "fsl,t4240-esdhc"
-    Possible compatibles for ARM:
-       "fsl,ls1012a-esdhc"
-       "fsl,ls1028a-esdhc"
-       "fsl,ls1088a-esdhc"
-       "fsl,ls1043a-esdhc"
-       "fsl,ls1046a-esdhc"
-       "fsl,ls2080a-esdhc"
-  - clock-frequency : specifies eSDHC base clock frequency.
-
-Optional properties:
-  - sdhci,wp-inverted : specifies that eSDHC controller reports
-    inverted write-protect state; New devices should use the generic
-    "wp-inverted" property.
-  - sdhci,1-bit-only : specifies that a controller can only handle
-    1-bit data transfers. New devices should use the generic
-    "bus-width = <1>" property.
-  - sdhci,auto-cmd12: specifies that a controller can only handle auto
-    CMD12.
-  - voltage-ranges : two cells are required, first cell specifies minimum
-    slot voltage (mV), second cell specifies maximum slot voltage (mV).
-    Several ranges could be specified.
-  - little-endian : If the host controller is little-endian mode, specify
-    this property. The default endian mode is big-endian.
-
-Example:
-
-sdhci@2e000 {
-       compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
-       reg = <0x2e000 0x1000>;
-       interrupts = <42 0x8>;
-       interrupt-parent = <&ipic>;
-       /* Filled in by U-Boot */
-       clock-frequency = <0>;
-       voltage-ranges = <3300 3300>;
-};