ARM: dts: sun8i: h3: add SY8113B regulator used by Orange Pi One board

Orange Pi One board has a SY8113B regulator, which is controlled via
GPIO and capable of outputing 1.1V when the PL6 GPIO is set to output 0
or 1.3V when the PL6 GPIO is set to input or output 1, and the output is
the power supply of the ARM cores in H3 SoC.

Add the device tree node of this regulator and set the cpu's cpu-supply
property to it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
[wens@csie.org: rename regulator node name and label]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 3328fe583c9ba3f3d52bb615d33a0a9f03c29647..d56ac39510781876ba57972f26a5c57dfb7c76c7 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -99,6 +99,27 @@
                        gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
                };
        };
+
+       reg_vdd_cpux: vdd-cpux-regulator {
+               compatible = "regulator-gpio";
+               regulator-name = "vdd-cpux";
+               regulator-type = "voltage";
+               regulator-boot-on;
+               regulator-always-on;
+               regulator-min-microvolt = <1100000>;
+               regulator-max-microvolt = <1300000>;
+               regulator-ramp-delay = <50>; /* 4ms */
+
+               gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+               enable-active-high;
+               gpios-states = <0x1>;
+               states = <1100000 0x0
+                         1300000 0x1>;
+       };
+};
+
+&cpu0 {
+       cpu-supply = <&reg_vdd_cpux>;
 };
 
 &de {