clk: bcm: Add BCM2711 DVP driver

The HDMI block has a block that controls clocks and reset signals to the
HDMI0 and HDMI1 controllers.

Let's expose that through a clock driver implementing a clock and reset
provider.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/bb60d97fc76b61c2eabef5a02ebd664c0f57ede0.1591867332.git-series.maxime@cerno.tech
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index 8c83977a7dc425b07d2dd262c7599ee4cd23a422..784f12c72365be0a9e37d62846c5e0fc0bc7e274 100644 (file)
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -1,4 +1,15 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+config CLK_BCM2711_DVP
+       tristate "Broadcom BCM2711 DVP support"
+       depends on ARCH_BCM2835 ||COMPILE_TEST
+       depends on COMMON_CLK
+       default ARCH_BCM2835
+       select RESET_SIMPLE
+       help
+         Enable common clock framework support for the Broadcom BCM2711
+         DVP Controller.
+
 config CLK_BCM2835
        bool "Broadcom BCM2835 clock support"
        depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST

diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 0070ddf6cdd243185628a756d6bc0813eca92cb7..edb66b44cb273492d669a3c8af783e5277799955 100644 (file)
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA)      += clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)     += clk-bcm281xx.o
 obj-$(CONFIG_CLK_BCM_KONA)     += clk-bcm21664.o
 obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_CLK_BCM2711_DVP)  += clk-bcm2711-dvp.o
 obj-$(CONFIG_CLK_BCM2835)      += clk-bcm2835.o
 obj-$(CONFIG_CLK_BCM2835)      += clk-bcm2835-aux.o
 obj-$(CONFIG_CLK_RASPBERRYPI)  += clk-raspberrypi.o

diff --git a/drivers/clk/bcm/clk-bcm2711-dvp.c b/drivers/clk/bcm/clk-bcm2711-dvp.c
new file mode 100644 (file)
index 0000000..84dbc88
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2711-dvp.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 Cerno
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reset/reset-simple.h>
+
+#define DVP_HT_RPI_SW_INIT     0x04
+#define DVP_HT_RPI_MISC_CONFIG 0x08
+
+#define NR_CLOCKS      2
+#define NR_RESETS      6
+
+struct clk_dvp {
+       struct clk_hw_onecell_data      *data;
+       struct reset_simple_data        reset;
+};
+
+static const struct clk_parent_data clk_dvp_parent = {
+       .index  = 0,
+};
+
+static int clk_dvp_probe(struct platform_device *pdev)
+{
+       struct clk_hw_onecell_data *data;
+       struct resource *res;
+       struct clk_dvp *dvp;
+       void __iomem *base;
+       int ret;
+
+       dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL);
+       if (!dvp)
+               return -ENOMEM;
+       platform_set_drvdata(pdev, dvp);
+
+       dvp->data = devm_kzalloc(&pdev->dev,
+                                struct_size(dvp->data, hws, NR_CLOCKS),
+                                GFP_KERNEL);
+       if (!dvp->data)
+               return -ENOMEM;
+       data = dvp->data;
+
+       base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+       if (IS_ERR(base))
+               return PTR_ERR(base);
+
+       dvp->reset.rcdev.owner = THIS_MODULE;
+       dvp->reset.rcdev.nr_resets = NR_RESETS;
+       dvp->reset.rcdev.ops = &reset_simple_ops;
+       dvp->reset.rcdev.of_node = pdev->dev.of_node;
+       dvp->reset.membase = base + DVP_HT_RPI_SW_INIT;
+       spin_lock_init(&dvp->reset.lock);
+
+       ret = devm_reset_controller_register(&pdev->dev, &dvp->reset.rcdev);
+       if (ret)
+               return ret;
+
+       data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev,
+                                                       "hdmi0-108MHz",
+                                                       &clk_dvp_parent, 0,
+                                                       base + DVP_HT_RPI_MISC_CONFIG, 3,
+                                                       CLK_GATE_SET_TO_DISABLE,
+                                                       &dvp->reset.lock);
+       if (IS_ERR(data->hws[0]))
+               return PTR_ERR(data->hws[0]);
+
+       data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev,
+                                                       "hdmi1-108MHz",
+                                                       &clk_dvp_parent, 0,
+                                                       base + DVP_HT_RPI_MISC_CONFIG, 4,
+                                                       CLK_GATE_SET_TO_DISABLE,
+                                                       &dvp->reset.lock);
+       if (IS_ERR(data->hws[1])) {
+               ret = PTR_ERR(data->hws[1]);
+               goto unregister_clk0;
+       }
+
+       data->num = NR_CLOCKS;
+       ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+                                    data);
+       if (ret)
+               goto unregister_clk1;
+
+       return 0;
+
+unregister_clk1:
+       clk_hw_unregister_gate(data->hws[1]);
+
+unregister_clk0:
+       clk_hw_unregister_gate(data->hws[0]);
+       return ret;
+};
+
+static int clk_dvp_remove(struct platform_device *pdev)
+{
+       struct clk_dvp *dvp = platform_get_drvdata(pdev);
+       struct clk_hw_onecell_data *data = dvp->data;
+
+       clk_hw_unregister_gate(data->hws[1]);
+       clk_hw_unregister_gate(data->hws[0]);
+
+       return 0;
+}
+
+static const struct of_device_id clk_dvp_dt_ids[] = {
+       { .compatible = "brcm,brcm2711-dvp", },
+       { /* sentinel */ }
+};
+
+static struct platform_driver clk_dvp_driver = {
+       .probe  = clk_dvp_probe,
+       .remove = clk_dvp_remove,
+       .driver = {
+               .name           = "brcm2711-dvp",
+               .of_match_table = clk_dvp_dt_ids,
+       },
+};
+module_platform_driver(clk_dvp_driver);