ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage

DDR3L is usually specified as

	JEDEC standard 1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V)

Therefore setting smps6 regulator to 1.2V is definitively below
minimum. It appears that real world chips are more forgiving than
data sheets indicate, but let's set the regulator right.

Note: a board that uses other voltages (DDR with 1.5V) can
overwrite by referencing &smps6_reg.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 60a33c4b7b8200bf64f4c2f7faf70bf7454cd26c..4caadb25324977e67c40d4ebde2929cd6782cbf8 100644 (file)
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -476,8 +476,8 @@
                                smps6_reg: smps6 {
                                        /* VDD_DDR3 - over VDD_SMPS6 */
                                        regulator-name = "smps6";
-                                       regulator-min-microvolt = <1200000>;
-                                       regulator-max-microvolt = <1200000>;
+                                       regulator-min-microvolt = <1350000>;
+                                       regulator-max-microvolt = <1350000>;
                                        regulator-always-on;
                                        regulator-boot-on;
                                };