--- /dev/null
+OMAP Dynamic Memory Manager (DMM) bindings
+
+The dynamic memory manager (DMM) is a module located immediately in front of the
+SDRAM controllers (called EMIFs on OMAP). DMM manages various aspects of memory
+accesses such as priority generation amongst initiators, configuration of SDRAM
+interleaving, optimizing transfer of 2D block objects, and provide MMU-like page
+translation for initiators which need contiguous dma bus addresses.
+
+Required properties:
+- compatible:  Should contain "ti,omap4-dmm" for OMAP4 family
+               Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
+- reg:         Contains DMM register address range (base address and length)
+- interrupts:  Should contain an interrupt-specifier for DMM_IRQ.
+- ti,hwmods:   Name of the hwmod associated to DMM, which is typically "dmm"
+
+Example:
+
+dmm@4e000000 {
+       compatible = "ti,omap4-dmm";
+       reg = <0x4e000000 0x800>;
+       ti,hwmods = "dmm";
+};
 
                        ti,hwmods = "wd_timer2";
                };
 
+               dmm@4e000000 {
+                       compatible = "ti,omap5-dmm";
+                       reg = <0x4e000000 0x800>;
+                       interrupts = <0 113 0x4>;
+                       ti,hwmods = "dmm";
+               };
+
                i2c1: i2c@48070000 {
                        compatible = "ti,omap4-i2c";
                        reg = <0x48070000 0x100>;
 
                        ti,hwmods = "kbd";
                };
 
+               dmm@4e000000 {
+                       compatible = "ti,omap4-dmm";
+                       reg = <0x4e000000 0x800>;
+                       interrupts = <0 113 0x4>;
+                       ti,hwmods = "dmm";
+               };
+
                emif1: emif@4c000000 {
                        compatible = "ti,emif-4d";
                        reg = <0x4c000000 0x100>;
 
                        ti,hwmods = "wd_timer2";
                };
 
+               dmm@4e000000 {
+                       compatible = "ti,omap5-dmm";
+                       reg = <0x4e000000 0x800>;
+                       interrupts = <0 113 0x4>;
+                       ti,hwmods = "dmm";
+               };
+
                emif1: emif@4c000000 {
                        compatible      = "ti,emif-4d5";
                        ti,hwmods       = "emif1";