hpet_writel(cnt, HPET_Tn_CMP(timer));
 
        /*
-        * We need to read back the CMP register to make sure that
-        * what we wrote hit the chip before we compare it to the
-        * counter.
+        * We need to read back the CMP register on certain HPET
+        * implementations (ATI chipsets) which seem to delay the
+        * transfer of the compare register into the internal compare
+        * logic. With small deltas this might actually be too late as
+        * the counter could already be higher than the compare value
+        * at that point and we would wait for the next hpet interrupt
+        * forever. We found out that reading the CMP register back
+        * forces the transfer so we can rely on the comparison with
+        * the counter register below. If the read back from the
+        * compare register does not match the value we programmed
+        * then we might have a real hardware problem. We can not do
+        * much about it here, but at least alert the user/admin with
+        * a prominent warning.
         */
-       WARN_ON_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt);
+       WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
+                 KERN_WARNING "hpet: compare register read back failed.\n");
 
        return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }