more bits set in the dimm-health-bitmap retrieved in
                response to H_SCM_HEALTH hcall. The details of the bit
                flags returned in response to this hcall is available
-               at 'Documentation/powerpc/papr_hcalls.rst' . Below are
+               at 'Documentation/arch/powerpc/papr_hcalls.rst' . Below are
                the flags reported in this sysfs file:
 
                * "not_armed"
 
 caused by over-heating, some by a poorly seated card. Many
 PCI error events are caused by software bugs, e.g. DMAs to
 wild addresses or bogus split transactions due to programming
-errors. See the discussion in Documentation/powerpc/eeh-pci-error-recovery.rst
+errors. See the discussion in Documentation/arch/powerpc/eeh-pci-error-recovery.rst
 for additional detail on real-life experience of the causes of
 software errors.
 
 .. note::
 
    Implementation details for the powerpc platform are discussed in
-   the file Documentation/powerpc/eeh-pci-error-recovery.rst
+   the file Documentation/arch/powerpc/eeh-pci-error-recovery.rst
 
    As of this writing, there is a growing list of device drivers with
    patches implementing error recovery. Not all of these patches are in
 
    nios2/index
    openrisc/index
    parisc/index
-   ../powerpc/index
+   powerpc/index
    ../riscv/index
    s390/index
    sh/index
 
     responsible for the initialization of the adapter, setting up the
     special path for user space access, and performing error recovery. It
     communicates directly the Flash Accelerator Functional Unit (AFU)
-    as described in Documentation/powerpc/cxl.rst.
+    as described in Documentation/arch/powerpc/cxl.rst.
 
     The cxlflash driver supports two, mutually exclusive, modes of
     operation at the device (LUN) level:
 
 
 PPC_FEATURE2_HTM_NOSC
     System calls fail if called in a transactional state, see
-    Documentation/powerpc/syscall64-abi.rst
+    Documentation/arch/powerpc/syscall64-abi.rst
 
 PPC_FEATURE2_ARCH_3_00
     The processor supports the v3.0B / v3.0C userlevel architecture. Processors
 
 PPC_FEATURE2_SCV
     The scv 0 instruction may be used for system calls, see
-    Documentation/powerpc/syscall64-abi.rst.
+    Documentation/arch/powerpc/syscall64-abi.rst.
 
 PPC_FEATURE2_HTM_NO_SUSPEND
     A limited Transactional Memory facility that does not support suspend is
-    available, see Documentation/powerpc/transactional_memory.rst.
+    available, see Documentation/arch/powerpc/transactional_memory.rst.
 
 PPC_FEATURE2_ARCH_3_1
     The processor supports the v3.1 userlevel architecture. Processors
 
 L:     linuxppc-dev@lists.ozlabs.org
 S:     Supported
 F:     Documentation/ABI/testing/sysfs-class-cxl
-F:     Documentation/powerpc/cxl.rst
+F:     Documentation/arch/powerpc/cxl.rst
 F:     arch/powerpc/platforms/powernv/pci-cxl.c
 F:     drivers/misc/cxl/
 F:     include/misc/cxl*
 M:     Uma Krishnan <ukrishn@linux.ibm.com>
 L:     linux-scsi@vger.kernel.org
 S:     Supported
-F:     Documentation/powerpc/cxlflash.rst
+F:     Documentation/arch/powerpc/cxlflash.rst
 F:     drivers/scsi/cxlflash/
 F:     include/uapi/scsi/cxlflash_ioctl.h
 
 F:     Documentation/devicetree/bindings/i2c/i2c-opal.txt
 F:     Documentation/devicetree/bindings/powerpc/
 F:     Documentation/devicetree/bindings/rtc/rtc-opal.txt
-F:     Documentation/powerpc/
+F:     Documentation/arch/powerpc/
 F:     arch/powerpc/
 F:     drivers/*/*/*pasemi*
 F:     drivers/*/*pasemi*
 L:     linuxppc-dev@lists.ozlabs.org
 S:     Supported
 F:     Documentation/PCI/pci-error-recovery.rst
-F:     Documentation/powerpc/eeh-pci-error-recovery.rst
+F:     Documentation/arch/powerpc/eeh-pci-error-recovery.rst
 F:     arch/powerpc/include/*/eeh*.h
 F:     arch/powerpc/kernel/eeh*.c
 F:     arch/powerpc/platforms/*/eeh*.c
 
  *
  * Call convention:
  *
- * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
+ * syscall register convention is in Documentation/arch/powerpc/syscall64-abi.rst
  */
 EXC_VIRT_BEGIN(system_call_vectored, 0x3000, 0x1000)
        /* SCV 0 */
  * Call convention:
  *
  * syscall and hypercalls register conventions are documented in
- * Documentation/powerpc/syscall64-abi.rst and
- * Documentation/powerpc/papr_hcalls.rst respectively.
+ * Documentation/arch/powerpc/syscall64-abi.rst and
+ * Documentation/arch/powerpc/papr_hcalls.rst respectively.
  *
  * The intersection of volatile registers that don't contain possible
  * inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
 
                memblock_set_bottom_up(true);
 
                /*
-                * See Documentation/powerpc/ultravisor.rst for more details.
+                * See Documentation/arch/powerpc/ultravisor.rst for more details.
                 *
                 * UV/HV data sharing is in PAGE_SIZE granularity. In order to
                 * minimize the number of pages shared, align the allocation to
 
 
 /*
  * This is a hcall, so register convention is as
- * Documentation/powerpc/papr_hcalls.rst.
+ * Documentation/arch/powerpc/papr_hcalls.rst.
  *
  * This may also be a syscall from PR-KVM userspace that is to be
  * reflected to the PR guest kernel, so registers may be set up for
 
 /*
  * Upload a microcode to the I-RAM at a specific address.
  *
- * See Documentation/powerpc/qe_firmware.rst for information on QE microcode
+ * See Documentation/arch/powerpc/qe_firmware.rst for information on QE microcode
  * uploading.
  *
  * Currently, only version 1 is supported, so the 'version' field must be
 
  * using the 2.6 Linux kernel kref construct.
  *
  * For direction on installation and usage of this driver please reference
- * Documentation/powerpc/hvcs.rst.
+ * Documentation/arch/powerpc/hvcs.rst.
  */
 
 #include <linux/device.h>
 
 
 /* Structure that defines QE firmware binary files.
  *
- * See Documentation/powerpc/qe_firmware.rst for a description of these
+ * See Documentation/arch/powerpc/qe_firmware.rst for a description of these
  * fields.
  */
 struct qe_firmware {