struct i40e_eth_stats *oes;
struct i40e_eth_stats *es; /* device's eth stats */
u32 tx_restart, tx_busy;
- u64 tx_lost_interrupt;
struct i40e_ring *p;
u32 rx_page, rx_buf;
u64 bytes, packets;
rx_b = rx_p = 0;
tx_b = tx_p = 0;
tx_restart = tx_busy = tx_linearize = tx_force_wb = 0;
- tx_lost_interrupt = 0;
rx_page = 0;
rx_buf = 0;
rcu_read_lock();
tx_busy += p->tx_stats.tx_busy;
tx_linearize += p->tx_stats.tx_linearize;
tx_force_wb += p->tx_stats.tx_force_wb;
- tx_lost_interrupt += p->tx_stats.tx_lost_interrupt;
/* Rx queue is part of the same block as Tx queue */
p = &p[1];
vsi->tx_busy = tx_busy;
vsi->tx_linearize = tx_linearize;
vsi->tx_force_wb = tx_force_wb;
- vsi->tx_lost_interrupt = tx_lost_interrupt;
vsi->rx_page_failed = rx_page;
vsi->rx_buf_failed = rx_buf;
* @vsi: Pointer to VSI struct
*
* This function checks specified queue for given VSI. Detects hung condition.
- * Sets hung bit since it is two step process. Before next run of service task
- * if napi_poll runs, it reset 'hung' bit for respective q_vector. If not,
- * hung condition remain unchanged and during subsequent run, this function
- * issues SW interrupt to recover from hung condition.
+ * We proactively detect hung TX queues by checking if interrupts are disabled
+ * but there are pending descriptors. If it appears hung, attempt to recover
+ * by triggering a SW interrupt.
**/
static void i40e_detect_recover_hung_queue(int q_idx, struct i40e_vsi *vsi)
{
struct i40e_ring *tx_ring = NULL;
struct i40e_pf *pf;
- u32 head, val, tx_pending_hw;
+ u32 val, tx_pending;
int i;
pf = vsi->back;
else
val = rd32(&pf->hw, I40E_PFINT_DYN_CTL0);
- head = i40e_get_head(tx_ring);
+ tx_pending = i40e_get_tx_pending(tx_ring);
- tx_pending_hw = i40e_get_tx_pending(tx_ring, false);
-
- /* HW is done executing descriptors, updated HEAD write back,
- * but SW hasn't processed those descriptors. If interrupt is
- * not generated from this point ON, it could result into
- * dev_watchdog detecting timeout on those netdev_queue,
- * hence proactively trigger SW interrupt.
+ /* Interrupts are disabled and TX pending is non-zero,
+ * trigger the SW interrupt (don't wait). Worst case
+ * there will be one extra interrupt which may result
+ * into not cleaning any queues because queues are cleaned.
*/
- if (tx_pending_hw && (!(val & I40E_PFINT_DYN_CTLN_INTENA_MASK))) {
- /* NAPI Poll didn't run and clear since it was set */
- if (test_and_clear_bit(I40E_Q_VECTOR_HUNG_DETECT,
- &tx_ring->q_vector->hung_detected)) {
- netdev_info(vsi->netdev, "VSI_seid %d, Hung TX queue %d, tx_pending_hw: %d, NTC:0x%x, HWB: 0x%x, NTU: 0x%x, TAIL: 0x%x\n",
- vsi->seid, q_idx, tx_pending_hw,
- tx_ring->next_to_clean, head,
- tx_ring->next_to_use,
- readl(tx_ring->tail));
- netdev_info(vsi->netdev, "VSI_seid %d, Issuing force_wb for TX queue %d, Interrupt Reg: 0x%x\n",
- vsi->seid, q_idx, val);
- i40e_force_wb(vsi, tx_ring->q_vector);
- } else {
- /* First Chance - detected possible hung */
- set_bit(I40E_Q_VECTOR_HUNG_DETECT,
- &tx_ring->q_vector->hung_detected);
- }
- }
-
- /* This is the case where we have interrupts missing,
- * so the tx_pending in HW will most likely be 0, but we
- * will have tx_pending in SW since the WB happened but the
- * interrupt got lost.
- */
- if ((!tx_pending_hw) && i40e_get_tx_pending(tx_ring, true) &&
- (!(val & I40E_PFINT_DYN_CTLN_INTENA_MASK))) {
- local_bh_disable();
- if (napi_reschedule(&tx_ring->q_vector->napi))
- tx_ring->tx_stats.tx_lost_interrupt++;
- local_bh_enable();
- }
+ if (tx_pending && (!(val & I40E_PFINT_DYN_CTLN_INTENA_MASK)))
+ i40e_force_wb(vsi, tx_ring->q_vector);
}
/**
/**
* i40e_get_tx_pending - how many tx descriptors not processed
* @tx_ring: the ring of descriptors
- * @in_sw: is tx_pending being checked in SW or HW
*
* Since there is no access to the ring head register
* in XL710, we need to use our local copies
**/
-u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw)
+u32 i40e_get_tx_pending(struct i40e_ring *ring)
{
u32 head, tail;
- if (!in_sw)
- head = i40e_get_head(ring);
- else
- head = ring->next_to_clean;
+ head = i40e_get_head(ring);
tail = readl(ring->tail);
if (head != tail)
* them to be written back in case we stay in NAPI.
* In this mode on X722 we do not enable Interrupt.
*/
- unsigned int j = i40e_get_tx_pending(tx_ring, false);
+ unsigned int j = i40e_get_tx_pending(tx_ring);
if (budget &&
((j / WB_STRIDE) == 0) && (j > 0) &&
return 0;
}
- /* Clear hung_detected bit */
- clear_bit(I40E_Q_VECTOR_HUNG_DETECT, &q_vector->hung_detected);
/* Since the actual Tx work is minimal, we can give the Tx a larger
* budget and be more aggressive about cleaning up the Tx descriptors.
*/
projects / users / willy / pagecache.git / commitdiff