recv.o \
                xmit.o \
                virtual.o \
-               rc.o
+               rc.o \
+               btcoex.o
 
 ath9k-$(CONFIG_PCI) += pci.o
 ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o
 
 #include "rc.h"
 #include "debug.h"
 #include "../ath.h"
+#include "btcoex.h"
 
 struct ath_node;
 
 
--- /dev/null
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+void ath9k_hw_btcoex_init(struct ath_hw *ah)
+{
+       /* connect bt_active to baseband */
+       REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+                       (AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
+                        AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
+
+       REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+                       AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
+
+       /* Set input mux for bt_active to gpio pin */
+       REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+                       AR_GPIO_INPUT_MUX1_BT_ACTIVE,
+                       ah->btactive_gpio);
+
+       /* Configure the desired gpio port for input */
+       ath9k_hw_cfg_gpio_input(ah, ah->btactive_gpio);
+}
+
+void ath9k_hw_btcoex_enable(struct ath_hw *ah)
+{
+       /* Configure the desired GPIO port for TX_FRAME output */
+       ath9k_hw_cfg_output(ah, ah->wlanactive_gpio,
+                           AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
+
+       ah->ah_sc->sc_flags |= SC_OP_BTCOEX_ENABLED;
+}
+
+void ath9k_hw_btcoex_disable(struct ath_hw *ah)
+{
+       ath9k_hw_set_gpio(ah, ah->wlanactive_gpio, 0);
+
+       ath9k_hw_cfg_output(ah, ah->wlanactive_gpio,
+                       AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+
+       ah->ah_sc->sc_flags &= ~SC_OP_BTCOEX_ENABLED;
+}
 
--- /dev/null
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef BTCOEX_H
+#define BTCOEX_H
+
+void ath9k_hw_btcoex_init(struct ath_hw *ah);
+void ath9k_hw_btcoex_enable(struct ath_hw *ah);
+void ath9k_hw_btcoex_disable(struct ath_hw *ah);
+
+#endif
 
 
        REG_WRITE(ah, AR_2040_MODE, macmode);
 }
-
-/***************************/
-/*  Bluetooth Coexistence  */
-/***************************/
-
-void ath9k_hw_btcoex_init(struct ath_hw *ah)
-{
-       /* connect bt_active to baseband */
-       REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-                       (AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
-                        AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
-
-       REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-                       AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
-
-       /* Set input mux for bt_active to gpio pin */
-       REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
-                       AR_GPIO_INPUT_MUX1_BT_ACTIVE,
-                       ah->btactive_gpio);
-
-       /* Configure the desired gpio port for input */
-       ath9k_hw_cfg_gpio_input(ah, ah->btactive_gpio);
-}
-
-void ath9k_hw_btcoex_enable(struct ath_hw *ah)
-{
-       /* Configure the desired GPIO port for TX_FRAME output */
-       ath9k_hw_cfg_output(ah, ah->wlanactive_gpio,
-                           AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
-
-       ah->ah_sc->sc_flags |= SC_OP_BTCOEX_ENABLED;
-}
-
-void ath9k_hw_btcoex_disable(struct ath_hw *ah)
-{
-       ath9k_hw_set_gpio(ah, ah->wlanactive_gpio, 0);
-
-       ath9k_hw_cfg_output(ah, ah->wlanactive_gpio,
-                       AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-
-       ah->ah_sc->sc_flags &= ~SC_OP_BTCOEX_ENABLED;
-}
 
 bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked);
 enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints);
 
-void ath9k_hw_btcoex_init(struct ath_hw *ah);
-void ath9k_hw_btcoex_enable(struct ath_hw *ah);
-void ath9k_hw_btcoex_disable(struct ath_hw *ah);
-
 #endif