tty: 8250, remove shadow and unused variables

The compiler complains about variables that are set, but never used:
* intX variables in exar_handle_irq
  drivers/tty/serial/8250/8250_port.c:1864:34: warning: variable ‘int3’ set but not used [-Wunused-but-set-variable]
* val variable in pci_quatech_wqopr
  drivers/tty/serial/8250/8250_pci.c:1139:10: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]

And about a shadow variable:
* tmout in wait_for_xmitr is defined twice with the same type. Both of
  them are also initialized before use.

Remove all of them.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Matt Schulte <matts@commtech-fastcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 8dd250fbd36726dc6fc370a75f7f412eee995766..3d6287a8981e084de63018e8d1ca6679430605d0 100644 (file)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1136,11 +1136,11 @@ static int pci_quatech_rqopr(struct uart_8250_port *port)
 static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr)
 {
        unsigned long base = port->port.iobase;
-       u8 LCR, val;
+       u8 LCR;
 
        LCR = inb(base + UART_LCR);
        outb(0xBF, base + UART_LCR);
-       val = inb(base + UART_SCR);
+       inb(base + UART_SCR);
        outb(qopr, base + UART_SCR);
        outb(LCR, base + UART_LCR);
 }

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index b10d05f2004ba3f7069fd279e1a026f32881783b..c8d8d245350b8c15ce949f0a651079e9f346e741 100644 (file)
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1861,7 +1861,6 @@ static int serial8250_default_handle_irq(struct uart_port *port)
  */
 static int exar_handle_irq(struct uart_port *port)
 {
-       unsigned char int0, int1, int2, int3;
        unsigned int iir = serial_port_in(port, UART_IIR);
        int ret;
 
@@ -1869,10 +1868,10 @@ static int exar_handle_irq(struct uart_port *port)
 
        if ((port->type == PORT_XR17V35X) ||
           (port->type == PORT_XR17D15X)) {
-               int0 = serial_port_in(port, 0x80);
-               int1 = serial_port_in(port, 0x81);
-               int2 = serial_port_in(port, 0x82);
-               int3 = serial_port_in(port, 0x83);
+               serial_port_in(port, 0x80);
+               serial_port_in(port, 0x81);
+               serial_port_in(port, 0x82);
+               serial_port_in(port, 0x83);
        }
 
        return ret;
@@ -1994,8 +1993,6 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 
        /* Wait up to 1s for flow control if necessary */
        if (up->port.flags & UPF_CONS_FLOW) {
-               unsigned int tmout;
-
                for (tmout = 1000000; tmout; tmout--) {
                        unsigned int msr = serial_in(up, UART_MSR);
                        up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;