Move the setting of mmc->actual_clock to zero into the set_clock
handlers themselves.  This will allow us to clean up the calling
logic for the set_clock() method, and turn sdhci_set_clock() into
a library function.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
        u16 clk;
        unsigned long timeout;
 
+       host->mmc->actual_clock = 0;
+
        sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
        if (clock == 0)
 
        u32 temp, val;
 
        if (clock == 0) {
+               host->mmc->actual_clock = 0;
+
                if (esdhc_is_usdhc(imx_data)) {
                        val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
                        writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
 
 
 static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 {
-
        int pre_div = 2;
        int div = 1;
        u32 temp;
 
+       host->mmc->actual_clock = 0;
+
        if (clock == 0)
                return;
 
 
        int src;
        u32 ctrl;
 
+       host->mmc->actual_clock = 0;
+
        /* don't bother if the clock is going off. */
        if (clock == 0)
                return;
        unsigned long timeout;
        u16 clk = 0;
 
+       host->mmc->actual_clock = 0;
+
        /* If the clock is going off, set to 0 at clock control register */
        if (clock == 0) {
                sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
        u16 clk = 0;
        unsigned long timeout;
 
-       host->mmc->actual_clock = 0;
-
        if (host->ops->set_clock) {
                host->ops->set_clock(host, clock);
                if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
                        return;
        }
 
+       host->mmc->actual_clock = 0;
+
        sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
        if (clock == 0)