Documentation: PCI: Amend error recovery doc with DPC/AER specifics

Amend the documentation on PCI error recovery with specifics about
Downstream Port Containment and Advanced Error Reporting:

* Explain that with DPC, devices are inaccessible upon an error (similar
  to EEH on powerpc) and do not become accessible until the link is
  re-enabled.

* Explain that with AER, although devices may already be accessible in the
  ->error_detected() callback, accesses should be deferred to the
  ->mmio_enabled() callback for compatibility with EEH on powerpc and with
  s390.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/61d8eeadb20ee71c3a852f44c863bfe0209c454d.1757942121.git.lukas@wunner.de

diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst
index d5c661baa87f9774a69f1369e59a786c935ec162..9e1e2f2a13fa60bb78e9eecf6d409d881e96acc8 100644 (file)
--- a/Documentation/PCI/pci-error-recovery.rst
+++ b/Documentation/PCI/pci-error-recovery.rst
@@ -122,6 +122,10 @@ A PCI bus error is detected by the PCI hardware.  On powerpc, the slot
 is isolated, in that all I/O is blocked: all reads return 0xffffffff,
 all writes are ignored.
 
+Similarly, on platforms supporting Downstream Port Containment
+(PCIe r7.0 sec 6.2.11), the link to the sub-hierarchy with the
+faulting device is disabled. Any device in the sub-hierarchy
+becomes inaccessible.
 
 STEP 1: Notification
 --------------------
@@ -204,6 +208,24 @@ link reset was performed by the HW. If the platform can't just re-enable IOs
 without a slot reset or a link reset, it will not call this callback, and
 instead will have gone directly to STEP 3 (Link Reset) or STEP 4 (Slot Reset)
 
+.. note::
+
+   On platforms supporting Advanced Error Reporting (PCIe r7.0 sec 6.2),
+   the faulting device may already be accessible in STEP 1 (Notification).
+   Drivers should nevertheless defer accesses to STEP 2 (MMIO Enabled)
+   to be compatible with EEH on powerpc and with s390 (where devices are
+   inaccessible until STEP 2).
+
+   On platforms supporting Downstream Port Containment, the link to the
+   sub-hierarchy with the faulting device is re-enabled in STEP 3 (Link
+   Reset). Hence devices in the sub-hierarchy are inaccessible until
+   STEP 4 (Slot Reset).
+
+   For errors such as Surprise Down (PCIe r7.0 sec 6.2.7), the device
+   may not even be accessible in STEP 4 (Slot Reset). Drivers can detect
+   accessibility by checking whether reads from the device return all 1's
+   (PCI_POSSIBLE_ERROR()).
+
 .. note::
 
    The following is proposed; no platform implements this yet: