arm64: dts: qcom: sc7180: Use QMP property to control load state

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SC7180 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-6-git-send-email-sibis@codeaurora.org

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 495c15deacb7d7106724e34e22c0ba72432adff1..acd2d1f453111ce8ca9f09ce658a561a333cde6c 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -15,7 +15,6 @@
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -1922,14 +1921,15 @@
                        clock-names = "iface", "bus", "nav", "snoc_axi",
                                      "mnoc_axi", "xo";
 
-                       power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-                                       <&rpmhpd SC7180_CX>,
+                       power-domains = <&rpmhpd SC7180_CX>,
                                        <&rpmhpd SC7180_MX>,
                                        <&rpmhpd SC7180_MSS>;
-                       power-domain-names = "load_state", "cx", "mx", "mss";
+                       power-domain-names = "cx", "mx", "mss";
 
                        memory-region = <&mpss_mem>;
 
+                       qcom,qmp = <&aoss_qmp>;
+
                        qcom,smem-states = <&modem_smp2p_out 0>;
                        qcom,smem-state-names = "stop";
 
@@ -3224,7 +3224,6 @@
                        mboxes = <&apss_shared 0>;
 
                        #clock-cells = <0>;
-                       #power-domain-cells = <1>;
                };
 
                spmi_bus: spmi@c440000 {