bus: mhi: host: pci_generic: Reset QDU100 while the MHI driver is removed

So, When the MHI driver is removed from the host side, it is essential to
ensure a clean and stable recovery of the device. This commit introduces
the following steps to achieve that:

1. Disable SR-IOV for any SR-IOV-enabled devices on the Physical Function.
2. Perform a SOC_RESET on the PF to fully reset the device.

Disabling SR-IOV ensures all Virtual Functions (VFs) are properly shutdown,
preventing issues during the reset process. The SOC_RESET guarantees that
the PF is restored to a known good state.

If soc_reset is not performed device at driver remove, device will be
stuck in mission mode state and subsequent driver insert/power_up will not
proceed further.

Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
[mani: reworded subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250912-uevent_vdev_next-20250911-v4-4-fa2f6ccd301b@quicinc.com

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 6d0bade288265d9fdab8555c089c9153b642454f..4de7e56d4b8819f1b26a34b8a9649327314169dd 100644 (file)
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -45,6 +45,7 @@
  * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
  *                of inband wake support (such as sdx24)
  * @no_m3: M3 not supported
+ * @reset_on_remove: Set true for devices that require SoC during driver removal
  */
 struct mhi_pci_dev_info {
        const struct mhi_controller_config *config;
@@ -58,6 +59,7 @@ struct mhi_pci_dev_info {
        unsigned int mru_default;
        bool sideband_wake;
        bool no_m3;
+       bool reset_on_remove;
 };
 
 #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
@@ -300,6 +302,7 @@ static const struct mhi_pci_dev_info mhi_qcom_qdu100_info = {
        .dma_data_width = 32,
        .sideband_wake = false,
        .no_m3 = true,
+       .reset_on_remove = true,
 };
 
 static const struct mhi_channel_config mhi_qcom_sa8775p_channels[] = {
@@ -1027,6 +1030,7 @@ struct mhi_pci_device {
        struct work_struct recovery_work;
        struct timer_list health_check_timer;
        unsigned long status;
+       bool reset_on_remove;
 };
 
 static int mhi_pci_read_reg(struct mhi_controller *mhi_cntrl,
@@ -1332,6 +1336,9 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
        mhi_cntrl->mru = info->mru_default;
        mhi_cntrl->name = info->name;
 
+       if (pdev->is_physfn)
+               mhi_pdev->reset_on_remove = info->reset_on_remove;
+
        if (info->edl_trigger)
                mhi_cntrl->edl_trigger = mhi_pci_generic_edl_trigger;
 
@@ -1404,6 +1411,8 @@ static void mhi_pci_remove(struct pci_dev *pdev)
        struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
        struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
 
+       pci_disable_sriov(pdev);
+
        if (pdev->is_physfn)
                timer_delete_sync(&mhi_pdev->health_check_timer);
        cancel_work_sync(&mhi_pdev->recovery_work);
@@ -1417,6 +1426,9 @@ static void mhi_pci_remove(struct pci_dev *pdev)
        if (pci_pme_capable(pdev, PCI_D3hot))
                pm_runtime_get_noresume(&pdev->dev);
 
+       if (mhi_pdev->reset_on_remove)
+               mhi_soc_reset(mhi_cntrl);
+
        mhi_unregister_controller(mhi_cntrl);
 }