arm64: dts: qcom: Add support for MSM8998 F(x)tec Pro1 QX1000

Add device tree support for the F(x)tec Pro 1 (QX1000) smartphone;
this is a minimal configuration to boot to serial console.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210909123823.368199-1-angelogioacchino.delregno@somainline.org

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index a7af01230d09b5d1f3a4d15a25778771bd125bdc..8398c0a2150fb466d8f63fef223f158bad441df1 100644 (file)
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_QCOM)       += msm8996-sony-xperia-tone-keyaki.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8996-xiaomi-gemini.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8996-xiaomi-scorpio.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8998-asus-novago-tp370ql.dtb
+dtb-$(CONFIG_ARCH_QCOM)        += msm8998-fxtec-pro1.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8998-mtp.dtb

diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
new file mode 100644 (file)
index 0000000..dc56656
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-mtp.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+       model = "F(x)tec Pro1 (QX1000)";
+       compatible = "fxtec,pro1", "qcom,msm8998";
+       qcom,board-id = <0x02000b 0x10>;
+
+       /*
+        * Until we hook up type-c detection, we
+        * have to stick with this. But it works.
+        */
+       extcon_usb: extcon-usb {
+               compatible = "linux,extcon-usb-gpio";
+               id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+       };
+
+       gpio-hall-sensors {
+               compatible = "gpio-keys";
+               input-name = "hall-sensors";
+               label = "Hall sensors";
+               pinctrl-names = "default";
+               pinctrl-0 = <&hall_sensor1_default>;
+
+               hall-sensor1 {
+                       label = "Keyboard Hall Sensor";
+                       gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
+                       debounce-interval = <15>;
+                       gpio-key,wakeup;
+                       linux,input-type = <EV_SW>;
+                       linux,code = <SW_KEYPAD_SLIDE>;
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               input-name = "side-buttons";
+               label = "Side buttons";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
+                           <&cam_snapshot_pin_a>;
+               vol-up {
+                       label = "Volume Up";
+                       gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <EV_KEY>;
+                       linux,code = <KEY_VOLUMEUP>;
+                       gpio-key,wakeup;
+                       debounce-interval = <15>;
+               };
+
+               camera-snapshot {
+                       label = "Camera Snapshot";
+                       gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <EV_KEY>;
+                       linux,code = <KEY_CAMERA>;
+                       debounce-interval = <15>;
+               };
+
+               camera-focus {
+                       label = "Camera Focus";
+                       gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <EV_KEY>;
+                       linux,code = <KEY_CAMERA_FOCUS>;
+                       debounce-interval = <15>;
+               };
+       };
+
+       reserved-memory {
+               cont_splash_mem: memory@9d400000 {
+                       reg = <0x0 0x9d400000 0x0 0x2000000>;
+                       no-map;
+               };
+
+               zap_shader_region: memory@f6400000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0x0 0xf6400000 0x0 0x2000>;
+                       no-map;
+               };
+
+               ramoops@ffc00000 {
+                       compatible = "ramoops";
+                       reg = <0x0 0xffc00000 0x0 0x100000>;
+                       console-size = <0x60000>;
+                       ecc-size = <16>;
+                       ftrace-size = <0x10000>;
+                       pmsg-size = <0x20000>;
+                       record-size = <0x10000>;
+               };
+       };
+};
+
+&mmcc {
+       status = "ok";
+};
+
+&mmss_smmu {
+       status = "ok";
+};
+
+&pm8998_gpio {
+       vol_up_pin_a: vol-up-active {
+               pins = "gpio6";
+               function = "normal";
+               bias-pull-up;
+               input-enable;
+               qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+       };
+
+       cam_focus_pin_a: cam-focus-btn-active {
+               pins = "gpio7";
+               function = "normal";
+               bias-pull-up;
+               input-enable;
+               qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+       };
+
+       cam_snapshot_pin_a: cam-snapshot-btn-active {
+               pins = "gpio8";
+               function = "normal";
+               bias-pull-up;
+               input-enable;
+               qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+       };
+};
+
+&pm8998_pon {
+       resin {
+               compatible = "qcom,pm8941-resin";
+               interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+               bias-pull-up;
+               debounce = <15625>;
+               linux,code = <KEY_VOLUMEDOWN>;
+       };
+};
+
+&tlmm {
+       gpio-reserved-ranges = <0 4>;
+
+       mdp_vsync_n: mdp-vsync-n {
+               pins = "gpio10";
+               function = "mdp_vsync_a";
+               bias-pull-down;
+               drive-strength = <2>;
+       };
+
+       hall_sensor1_default: hall-sensor1-def {
+               pins = "gpio124";
+               function = "gpio";
+               bias-disable;
+               drive-strength = <2>;
+               input-enable;
+       };
+};
+
+&ufshc {
+       status = "ok";
+};
+
+&ufsphy {
+       status = "ok";
+};
+
+&usb3_dwc3 {
+       dr_mode = "peripheral";
+       extcon = <&extcon_usb>;
+};
+
+/* GT9286 analog supply */
+&vreg_l28_3p0 {
+       regulator-min-microvolt = <2800000>;
+       regulator-max-microvolt = <2800000>;
+};