bnx2x: Do not enable CL37 BAM unless it is explicitly enabled

Enabling CL37 BAM on BCM8073 by default may lead to link issues since
not all switches support it. So enable CL37 BAM only if explicitly
selected.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index 18c8e23a0e82fafaabe0183700960a194c9524af..4cfd4e9b5586f1740d547b02aa8f86e756c86033 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -244,7 +244,14 @@ struct port_hw_cfg {                           /* port 0: 0x12c  port 1: 0x2bc */
 
        u16 xgxs_config_tx[4];                              /* 0x1A0 */
 
-       u32 Reserved1[57];                                  /* 0x1A8 */
+       u32 Reserved1[56];                                  /* 0x1A8 */
+       u32 default_cfg;                                    /* 0x288 */
+       /*  Enable BAM on KR */
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_MASK                    0x00100000
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_SHIFT                   20
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_DISABLED                0x00000000
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED                 0x00100000
+
        u32 speed_capability_mask2;                         /* 0x28C */
 #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK                0x0000FFFF
 #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT               0

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 488e251a2d3ffa1183f04a384ed4439133a86232..d076b911e160cbffb6ee6f99675c79bbf81d9551 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -3525,13 +3525,19 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
        DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1);
 
        /* Enable CL37 BAM */
-       bnx2x_cl45_read(bp, phy,
-                       MDIO_AN_DEVAD,
-                       MDIO_AN_REG_8073_BAM, &val);
-       bnx2x_cl45_write(bp, phy,
-                        MDIO_AN_DEVAD,
-                        MDIO_AN_REG_8073_BAM, val | 1);
+       if (REG_RD(bp, params->shmem_base +
+                        offsetof(struct shmem_region, dev_info.
+                                 port_hw_config[params->port].default_cfg)) &
+           PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) {
 
+               bnx2x_cl45_read(bp, phy,
+                               MDIO_AN_DEVAD,
+                               MDIO_AN_REG_8073_BAM, &val);
+               bnx2x_cl45_write(bp, phy,
+                                MDIO_AN_DEVAD,
+                                MDIO_AN_REG_8073_BAM, val | 1);
+               DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n");
+       }
        if (params->loopback_mode == LOOPBACK_EXT) {
                bnx2x_807x_force_10G(bp, phy);
                DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n");