arm64: dts: qcom: sm8350-sagami: Enable and populate I2C/SPI nodes

Based on current driver availability, add either nodes or comments regarding
peripherals connected via I2C/SPI.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-14-konrad.dybcio@somainline.org

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index b50f04ffee95b5c2795a80456d3ffcf3a7b6fa50..c44376aa07429cbeb543ba17703630f6df14a42e 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -75,6 +75,93 @@
        };
 };
 
+&i2c1 {
+       status = "okay";
+       clock-frequency = <1000000>;
+
+       /* Some subset of SONY IMX663 camera sensor @ 38 */
+};
+
+&i2c2 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       /* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c4 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
+};
+
+&i2c11 {
+       status = "okay";
+       clock-frequency = <1000000>;
+
+       cs35l41_l: cs35l41@40 {
+               compatible = "cirrus,cs35l41";
+               reg = <0x40>;
+               interrupt-parent = <&tlmm>;
+               interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+               cirrus,boost-peak-milliamp = <4000>;
+               cirrus,boost-ind-nanohenry = <1000>;
+               cirrus,boost-cap-microfarad = <15>;
+               cirrus,asp-sdout-hiz = <3>;
+               cirrus,gpio2-src-select = <2>;
+               cirrus,gpio2-output-enable;
+               #sound-dai-cells = <1>;
+       };
+
+       cs35l41_r: cs35l41@41 {
+               compatible = "cirrus,cs35l41";
+               reg = <0x41>;
+               interrupt-parent = <&tlmm>;
+               interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+               cirrus,boost-peak-milliamp = <4000>;
+               cirrus,boost-ind-nanohenry = <1000>;
+               cirrus,boost-cap-microfarad = <15>;
+               cirrus,asp-sdout-hiz = <3>;
+               cirrus,gpio2-src-select = <2>;
+               cirrus,gpio2-output-enable;
+               #sound-dai-cells = <1>;
+       };
+};
+
+&i2c12 {
+       status = "okay";
+       /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+       clock-frequency = <100000>;
+
+       /* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+       status = "okay";
+       /* Clock frequency was not specified downstream, let's park it to 100 KHz */
+       clock-frequency = <100000>;
+
+       /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
+       /* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c15 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       /* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c17 {
+       status = "okay";
+       clock-frequency = <1000000>;
+
+       /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
 &pmk8350_rtc {
        status = "okay";
 };
@@ -100,8 +187,22 @@
        status = "okay";
 };
 
+&spi14 {
+       status = "okay";
+
+       /* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
 &tlmm {
        gpio-reserved-ranges = <44 4>;
+
+       ts_int_default: ts-int-default {
+               pin = "gpio23";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               input-enable;
+       };
 };
 
 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */