cpu/hotplug: Boot HT siblings at least once

Due to the way Machine Check Exceptions work on X86 hyperthreads it's
required to boot up _all_ logical cores at least once in order to set the
CR4.MCE bit.

So instead of ignoring the sibling threads right away, let them boot up
once so they can configure themselves. After they came out of the initial
boot stage check whether its a "secondary" sibling and cancel the operation
which puts the CPU back into offline state.

Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tony Luck <tony.luck@intel.com>

diff --git a/kernel/cpu.c b/kernel/cpu.c
index d29fdd7e57bb3dc956edcff7fb8a88ea427f3a7b..6f3a3cde8b83ae26573e03aeac06526c1ee2c68b 100644 (file)
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -60,6 +60,7 @@ struct cpuhp_cpu_state {
        bool                    rollback;
        bool                    single;
        bool                    bringup;
+       bool                    booted_once;
        struct hlist_node       *node;
        struct hlist_node       *last;
        enum cpuhp_state        cb_state;
@@ -342,6 +343,40 @@ void cpu_hotplug_enable(void)
 EXPORT_SYMBOL_GPL(cpu_hotplug_enable);
 #endif /* CONFIG_HOTPLUG_CPU */
 
+#ifdef CONFIG_HOTPLUG_SMT
+enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED;
+
+static int __init smt_cmdline_disable(char *str)
+{
+       cpu_smt_control = CPU_SMT_DISABLED;
+       if (str && !strcmp(str, "force")) {
+               pr_info("SMT: Force disabled\n");
+               cpu_smt_control = CPU_SMT_FORCE_DISABLED;
+       }
+       return 0;
+}
+early_param("nosmt", smt_cmdline_disable);
+
+static inline bool cpu_smt_allowed(unsigned int cpu)
+{
+       if (cpu_smt_control == CPU_SMT_ENABLED)
+               return true;
+
+       if (topology_is_primary_thread(cpu))
+               return true;
+
+       /*
+        * On x86 it's required to boot all logical CPUs at least once so
+        * that the init code can get a chance to set CR4.MCE on each
+        * CPU. Otherwise, a broadacasted MCE observing CR4.MCE=0b on any
+        * core will shutdown the machine.
+        */
+       return !per_cpu(cpuhp_state, cpu).booted_once;
+}
+#else
+static inline bool cpu_smt_allowed(unsigned int cpu) { return true; }
+#endif
+
 static inline enum cpuhp_state
 cpuhp_set_state(struct cpuhp_cpu_state *st, enum cpuhp_state target)
 {
@@ -422,6 +457,16 @@ static int bringup_wait_for_ap(unsigned int cpu)
        stop_machine_unpark(cpu);
        kthread_unpark(st->thread);
 
+       /*
+        * SMT soft disabling on X86 requires to bring the CPU out of the
+        * BIOS 'wait for SIPI' state in order to set the CR4.MCE bit.  The
+        * CPU marked itself as booted_once in cpu_notify_starting() so the
+        * cpu_smt_allowed() check will now return false if this is not the
+        * primary sibling.
+        */
+       if (!cpu_smt_allowed(cpu))
+               return -ECANCELED;
+
        if (st->target <= CPUHP_AP_ONLINE_IDLE)
                return 0;
 
@@ -933,29 +978,6 @@ EXPORT_SYMBOL(cpu_down);
 #define takedown_cpu           NULL
 #endif /*CONFIG_HOTPLUG_CPU*/
 
-#ifdef CONFIG_HOTPLUG_SMT
-enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED;
-
-static int __init smt_cmdline_disable(char *str)
-{
-       cpu_smt_control = CPU_SMT_DISABLED;
-       if (str && !strcmp(str, "force")) {
-               pr_info("SMT: Force disabled\n");
-               cpu_smt_control = CPU_SMT_FORCE_DISABLED;
-       }
-       return 0;
-}
-early_param("nosmt", smt_cmdline_disable);
-
-static inline bool cpu_smt_allowed(unsigned int cpu)
-{
-       return cpu_smt_control == CPU_SMT_ENABLED ||
-               topology_is_primary_thread(cpu);
-}
-#else
-static inline bool cpu_smt_allowed(unsigned int cpu) { return true; }
-#endif
-
 /**
  * notify_cpu_starting(cpu) - Invoke the callbacks on the starting CPU
  * @cpu: cpu that just started
@@ -970,6 +992,7 @@ void notify_cpu_starting(unsigned int cpu)
        int ret;
 
        rcu_cpu_starting(cpu);  /* Enables RCU usage on this CPU. */
+       st->booted_once = true;
        while (st->state < target) {
                st->state++;
                ret = cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
@@ -2180,5 +2203,6 @@ void __init boot_cpu_init(void)
  */
 void __init boot_cpu_state_init(void)
 {
-       per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE;
+       this_cpu_write(cpuhp_state.booted_once, true);
+       this_cpu_write(cpuhp_state.state, CPUHP_ONLINE);
 }