liquidio: fix use of pf in pass-through mode in a virtual machine

Fix problem when PF is used in pass-through mode in a VM (w/embedded f/w).

If host error reading PF num from CN23XX_PCIE_SRIOV_FDL reg,
try to retrieve PF num from SLI_PKT(0)_INPUT_CONTROL (initialized by f/w).

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
index 4b0ca9fb2cb4578b9c74b775d33d4fa638beb21a..fbc0d4e008f3a31b5645f1c8de7ccc006aed40f8 100644 (file)
--- a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
+++ b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
@@ -1150,14 +1150,50 @@ static void cn23xx_get_pcie_qlmport(struct octeon_device *oct)
                oct->pcie_port);
 }
 
-static void cn23xx_get_pf_num(struct octeon_device *oct)
+static int cn23xx_get_pf_num(struct octeon_device *oct)
 {
        u32 fdl_bit = 0;
+       u64 pkt0_in_ctl, d64;
+       int pfnum, mac, trs, ret;
+
+       ret = 0;
 
        /** Read Function Dependency Link reg to get the function number */
-       pci_read_config_dword(oct->pci_dev, CN23XX_PCIE_SRIOV_FDL, &fdl_bit);
-       oct->pf_num = ((fdl_bit >> CN23XX_PCIE_SRIOV_FDL_BIT_POS) &
-                      CN23XX_PCIE_SRIOV_FDL_MASK);
+       if (pci_read_config_dword(oct->pci_dev, CN23XX_PCIE_SRIOV_FDL,
+                                 &fdl_bit) == 0) {
+               oct->pf_num = ((fdl_bit >> CN23XX_PCIE_SRIOV_FDL_BIT_POS) &
+                              CN23XX_PCIE_SRIOV_FDL_MASK);
+       } else {
+               ret = EINVAL;
+
+               /* Under some virtual environments, extended PCI regs are
+                * inaccessible, in which case the above read will have failed.
+                * In this case, read the PF number from the
+                * SLI_PKT0_INPUT_CONTROL reg (written by f/w)
+                */
+               pkt0_in_ctl = octeon_read_csr64(oct,
+                                               CN23XX_SLI_IQ_PKT_CONTROL64(0));
+               pfnum = (pkt0_in_ctl >> CN23XX_PKT_INPUT_CTL_PF_NUM_POS) &
+                       CN23XX_PKT_INPUT_CTL_PF_NUM_MASK;
+               mac = (octeon_read_csr(oct, CN23XX_SLI_MAC_NUMBER)) & 0xff;
+
+               /* validate PF num by reading RINFO; f/w writes RINFO.trs == 1*/
+               d64 = octeon_read_csr64(oct,
+                                       CN23XX_SLI_PKT_MAC_RINFO64(mac, pfnum));
+               trs = (int)(d64 >> CN23XX_PKT_MAC_CTL_RINFO_TRS_BIT_POS) & 0xff;
+               if (trs == 1) {
+                       dev_err(&oct->pci_dev->dev,
+                               "OCTEON: error reading PCI cfg space pfnum, re-read %u\n",
+                               pfnum);
+                       oct->pf_num = pfnum;
+                       ret = 0;
+               } else {
+                       dev_err(&oct->pci_dev->dev,
+                               "OCTEON: error reading PCI cfg space pfnum; could not ascertain PF number\n");
+               }
+       }
+
+       return ret;
 }
 
 static void cn23xx_setup_reg_address(struct octeon_device *oct)
@@ -1279,7 +1315,8 @@ int setup_cn23xx_octeon_pf_device(struct octeon_device *oct)
                return 1;
        }
 
-       cn23xx_get_pf_num(oct);
+       if (cn23xx_get_pf_num(oct) != 0)
+               return 1;
 
        if (cn23xx_sriov_config(oct)) {
                octeon_unmap_pci_barx(oct, 0);

diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c
index 89d4bbc8170758493de18ed21f59e1f20202d16b..c2360fe8cef2bacc250569f112207869da5a2372 100644 (file)
--- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
@@ -1560,6 +1560,8 @@ static int octeon_chip_specific_setup(struct octeon_device *oct)
        case OCTEON_CN23XX_PCIID_PF:
                oct->chip_id = OCTEON_CN23XX_PF_VID;
                ret = setup_cn23xx_octeon_pf_device(oct);
+               if (ret)
+                       break;
 #ifdef CONFIG_PCI_IOV
                if (!ret)
                        pci_sriov_set_totalvfs(oct->pci_dev,