target/spc: Expose ATO bit in control mode page

This patch updates spc_modesense_control() to set the Application
Tag Owner (ATO) bit when when DIF emulation is enabled by the
backend device.

Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index 73fdff58d88dff21da23299f9bd9efd59cb592a4..43c5ca9878bc5b6f3f1d675c04779b245ccc1a22 100644 (file)
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -858,6 +858,19 @@ static int spc_modesense_control(struct se_device *dev, u8 pc, u8 *p)
         * status (see SAM-4).
         */
        p[5] = (dev->dev_attrib.emulate_tas) ? 0x40 : 0x00;
+       /*
+        * From spc4r30, section 7.5.7 Control mode page
+        *
+        * Application Tag Owner (ATO) bit set to one.
+        *
+        * If the ATO bit is set to one the device server shall not modify the
+        * LOGICAL BLOCK APPLICATION TAG field and, depending on the protection
+        * type, shall not modify the contents of the LOGICAL BLOCK REFERENCE
+        * TAG field.
+        */
+       if (dev->dev_attrib.pi_prot_type)
+               p[5] |= 0x80;
+
        p[8] = 0xff;
        p[9] = 0xff;
        p[11] = 30;