arm64: dts: ti: k3-pinctrl: Introduce debounce select mux macros

Introduce the debounce select mux macros to allow folks to setup
debounce configuration for pins. Each configuration selected maps
to a specific timing register as documented in appropriate Technical
Reference Manual (example:[1]).

[1] AM625x TRM (section 6.1.2.2): https://www.ti.com/lit/pdf/spruiv7

Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230619131620.3286650-1-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index c97548a3f42db75991471cfe742e6897ccc7921c..6004e0967ec57880005cb64a48a1585cd76df171 100644 (file)
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -11,6 +11,7 @@
 #define PULLUDEN_SHIFT         (16)
 #define PULLTYPESEL_SHIFT      (17)
 #define RXACTIVE_SHIFT         (18)
+#define DEBOUNCE_SHIFT         (11)
 
 #define PULL_DISABLE           (1 << PULLUDEN_SHIFT)
 #define PULL_ENABLE            (0 << PULLUDEN_SHIFT)
@@ -29,6 +30,14 @@
 #define PIN_INPUT_PULLUP       (INPUT_EN | PULL_UP)
 #define PIN_INPUT_PULLDOWN     (INPUT_EN | PULL_DOWN)
 
+#define PIN_DEBOUNCE_DISABLE   (0 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF1     (1 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF2     (2 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF3     (3 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF4     (4 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF5     (5 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF6     (6 << DEBOUNCE_SHIFT)
+
 #define AM62AX_IOPAD(pa, val, muxmode)         (((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM62AX_MCU_IOPAD(pa, val, muxmode)     (((pa) & 0x1fff)) ((val) | (muxmode))