net: phy: cortina: Utilize generic functions

cortina_soft_reset() does the same thing as gen10g_soft_reset(), and
cortina_config_aneg() is actually doing what gen10g_config_init() does
for 10G capable PHYs.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c
index 9442db2218348713e87faf91ccc25f4a8444526a..8022cd317f62bca6338a7b66ab190e410d1fe5e1 100644 (file)
--- a/drivers/net/phy/cortina.c
+++ b/drivers/net/phy/cortina.c
@@ -30,14 +30,6 @@ static int cortina_read_reg(struct phy_device *phydev, u16 regnum)
                            MII_ADDR_C45 | regnum);
 }
 
-static int cortina_config_aneg(struct phy_device *phydev)
-{
-       phydev->supported = SUPPORTED_10000baseT_Full;
-       phydev->advertising = SUPPORTED_10000baseT_Full;
-
-       return 0;
-}
-
 static int cortina_read_status(struct phy_device *phydev)
 {
        int gpio_int_status, ret = 0;
@@ -61,11 +53,6 @@ err:
        return ret;
 }
 
-static int cortina_soft_reset(struct phy_device *phydev)
-{
-       return 0;
-}
-
 static int cortina_probe(struct phy_device *phydev)
 {
        u32 phy_id = 0;
@@ -101,9 +88,10 @@ static struct phy_driver cortina_driver[] = {
        .phy_id         = PHY_ID_CS4340,
        .phy_id_mask    = 0xffffffff,
        .name           = "Cortina CS4340",
-       .config_aneg    = cortina_config_aneg,
+       .config_init    = gen10g_config_init,
+       .config_aneg    = gen10g_config_aneg,
        .read_status    = cortina_read_status,
-       .soft_reset     = cortina_soft_reset,
+       .soft_reset     = gen10g_no_soft_reset,
        .probe          = cortina_probe,
 },
 };