usb: dwc2: Remove dwc2_set_all_params function

Replace this by statically defining a function with defaults, and just
assigning it. This will allow us to use parameters of any type and any
default value.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 8d26847e96d6e18a2b91a4f837178e7dbd709311..f282742335960a42b53eb7d26d21e4849d036c0f 100644 (file)
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1252,8 +1252,6 @@ extern void dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val);
 extern void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
                                const struct dwc2_core_params *params);
 
-extern void dwc2_set_all_params(struct dwc2_core_params *params, int value);
-
 extern int dwc2_get_hwparams(struct dwc2_hsotg *hsotg);
 
 extern int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg);

diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index d6c92d4f53cef6c500c44bc043af428dda81f8d1..360f2941de3c3d87126630d1e912e687fb7fb0ed 100644 (file)
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -197,6 +197,44 @@ static const struct dwc2_core_params params_amlogic = {
        .hibernation                    = -1,
 };
 
+static const struct dwc2_core_params params_default = {
+       .otg_cap                        = -1,
+       .otg_ver                        = -1,
+       .dma_enable                     = -1,
+
+       /*
+        * Disable descriptor dma mode by default as the HW can support
+        * it, but does not support it for SPLIT transactions.
+        * Disable it for FS devices as well.
+        */
+       .dma_desc_enable                = 0,
+       .dma_desc_fs_enable             = 0,
+
+       .speed                          = -1,
+       .enable_dynamic_fifo            = -1,
+       .en_multiple_tx_fifo            = -1,
+       .host_rx_fifo_size              = -1,
+       .host_nperio_tx_fifo_size       = -1,
+       .host_perio_tx_fifo_size        = -1,
+       .max_transfer_size              = -1,
+       .max_packet_count               = -1,
+       .host_channels                  = -1,
+       .phy_type                       = -1,
+       .phy_utmi_width                 = -1,
+       .phy_ulpi_ddr                   = -1,
+       .phy_ulpi_ext_vbus              = -1,
+       .i2c_enable                     = -1,
+       .ulpi_fs_ls                     = -1,
+       .host_support_fs_ls_low_power   = -1,
+       .host_ls_low_power_phy_clk      = -1,
+       .ts_dline                       = -1,
+       .reload_ctl                     = -1,
+       .ahbcfg                         = -1,
+       .uframe_sched                   = -1,
+       .external_id_pin_ctl            = -1,
+       .hibernation                    = -1,
+};
+
 const struct of_device_id dwc2_of_match_table[] = {
        { .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
        { .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
@@ -1109,46 +1147,18 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
        return 0;
 }
 
-/*
- * Sets all parameters to the given value.
- *
- * Assumes that the dwc2_core_params struct contains only integers.
- */
-void dwc2_set_all_params(struct dwc2_core_params *params, int value)
-{
-       int *p = (int *)params;
-       size_t size = sizeof(*params) / sizeof(*p);
-       int i;
-
-       for (i = 0; i < size; i++)
-               p[i] = value;
-}
-
 int dwc2_init_params(struct dwc2_hsotg *hsotg)
 {
        const struct of_device_id *match;
-       const struct dwc2_core_params *params;
-       struct dwc2_core_params defparams;
+       struct dwc2_core_params params;
 
        match = of_match_device(dwc2_of_match_table, hsotg->dev);
-       if (match && match->data) {
-               params = match->data;
-       } else {
-               /* Default all params to autodetect */
-               dwc2_set_all_params(&defparams, -1);
-               params = &defparams;
-
-               /*
-                * Disable descriptor dma mode by default as the HW can support
-                * it, but does not support it for SPLIT transactions.
-                * Disable it for FS devices as well.
-                */
-               defparams.dma_desc_enable = 0;
-               defparams.dma_desc_fs_enable = 0;
-       }
+       if (match && match->data)
+               params = *((struct dwc2_core_params *)match->data);
+       else
+               params = params_default;
 
-       /* Validate parameter values */
-       dwc2_set_parameters(hsotg, params);
+       dwc2_set_parameters(hsotg, &params);
 
        return 0;
 }

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 4fbfe099b991ccead42607eb40637bc73577f028..4fc8c603afb8b476266da434b4cd4a0625f7f30b 100644 (file)
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -398,8 +398,6 @@ static int dwc2_driver_probe(struct platform_device *dev)
 
        spin_lock_init(&hsotg->lock);
 
-       dwc2_set_all_params(&hsotg->params, -1);
-
        hsotg->irq = platform_get_irq(dev, 0);
        if (hsotg->irq < 0) {
                dev_err(&dev->dev, "missing IRQ resource\n");