--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This is a driver for the keyboard, touchpad and USB port of the
+ * keyboard dock for the Asus TF103C 2-in-1 tablet.
+ *
+ * This keyboard dock has its own I2C attached embedded controller
+ * and the keyboard and touchpad are also connected over I2C,
+ * instead of using the usual USB connection. This means that the
+ * keyboard dock requires this special driver to function.
+ *
+ * Copyright (C) 2021 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/hid.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mod_devicetable.h>
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/workqueue.h>
+#include <asm/unaligned.h>
+
+static bool fnlock;
+module_param(fnlock, bool, 0644);
+MODULE_PARM_DESC(fnlock,
+ "By default the kbd toprow sends multimedia key presses. AltGr "
+ "can be pressed to change this to F1-F12. Set this to 1 to "
+ "change the default. Press AltGr + Esc to toggle at runtime.");
+
+#define TF103C_DOCK_DEV_NAME "NPCE69A:00"
+
+#define TF103C_DOCK_HPD_DEBOUNCE msecs_to_jiffies(20)
+
+/*** Touchpad I2C device defines ***/
+#define TF103C_DOCK_TP_ADDR 0x15
+
+/*** Keyboard I2C device defines **A*/
+#define TF103C_DOCK_KBD_ADDR 0x16
+
+#define TF103C_DOCK_KBD_DATA_REG 0x73
+#define TF103C_DOCK_KBD_DATA_MIN_LENGTH 4
+#define TF103C_DOCK_KBD_DATA_MAX_LENGTH 11
+#define TF103C_DOCK_KBD_DATA_MODIFIERS 3
+#define TF103C_DOCK_KBD_DATA_KEYS 5
+#define TF103C_DOCK_KBD_CMD_REG 0x75
+
+#define TF103C_DOCK_KBD_CMD_ENABLE 0x0800
+
+/*** EC innterrupt data I2C device defines ***/
+#define TF103C_DOCK_INTR_ADDR 0x19
+#define TF103C_DOCK_INTR_DATA_REG 0x6a
+
+#define TF103C_DOCK_INTR_DATA1_OBF_MASK 0x01
+#define TF103C_DOCK_INTR_DATA1_KEY_MASK 0x04
+#define TF103C_DOCK_INTR_DATA1_KBC_MASK 0x08
+#define TF103C_DOCK_INTR_DATA1_AUX_MASK 0x20
+#define TF103C_DOCK_INTR_DATA1_SCI_MASK 0x40
+#define TF103C_DOCK_INTR_DATA1_SMI_MASK 0x80
+/* Special values for the OOB data on kbd_client / tp_client */
+#define TF103C_DOCK_INTR_DATA1_OOB_VALUE 0xc1
+#define TF103C_DOCK_INTR_DATA2_OOB_VALUE 0x04
+
+#define TF103C_DOCK_SMI_AC_EVENT 0x31
+#define TF103C_DOCK_SMI_HANDSHAKING 0x50
+#define TF103C_DOCK_SMI_EC_WAKEUP 0x53
+#define TF103C_DOCK_SMI_BOOTBLOCK_RESET 0x5e
+#define TF103C_DOCK_SMI_WATCHDOG_RESET 0x5f
+#define TF103C_DOCK_SMI_ADAPTER_CHANGE 0x60
+#define TF103C_DOCK_SMI_DOCK_INSERT 0x61
+#define TF103C_DOCK_SMI_DOCK_REMOVE 0x62
+#define TF103C_DOCK_SMI_PAD_BL_CHANGE 0x63
+#define TF103C_DOCK_SMI_HID_STATUS_CHANGED 0x64
+#define TF103C_DOCK_SMI_HID_WAKEUP 0x65
+#define TF103C_DOCK_SMI_S3 0x83
+#define TF103C_DOCK_SMI_S5 0x85
+#define TF103C_DOCK_SMI_NOTIFY_SHUTDOWN 0x90
+#define TF103C_DOCK_SMI_RESUME 0x91
+
+/*** EC (dockram) I2C device defines ***/
+#define TF103C_DOCK_EC_ADDR 0x1b
+
+#define TF103C_DOCK_EC_CMD_REG 0x0a
+#define TF103C_DOCK_EC_CMD_LEN 9
+
+enum {
+ TF103C_DOCK_FLAG_HID_OPEN,
+};
+
+struct tf103c_dock_data {
+ struct delayed_work hpd_work;
+ struct irq_chip tp_irqchip;
+ struct irq_domain *tp_irq_domain;
+ struct i2c_client *ec_client;
+ struct i2c_client *intr_client;
+ struct i2c_client *kbd_client;
+ struct i2c_client *tp_client;
+ struct gpio_desc *pwr_en;
+ struct gpio_desc *irq_gpio;
+ struct gpio_desc *hpd_gpio;
+ struct input_dev *input;
+ struct hid_device *hid;
+ unsigned long flags;
+ int board_rev;
+ int irq;
+ int hpd_irq;
+ int tp_irq;
+ int last_press_0x13;
+ int last_press_0x14;
+ bool enabled;
+ bool tp_enabled;
+ bool altgr_pressed;
+ bool esc_pressed;
+ bool filter_esc;
+ u8 kbd_buf[TF103C_DOCK_KBD_DATA_MAX_LENGTH];
+};
+
+static struct gpiod_lookup_table tf103c_dock_gpios = {
+ .dev_id = "i2c-" TF103C_DOCK_DEV_NAME,
+ .table = {
+ GPIO_LOOKUP("INT33FC:00", 55, "dock_pwr_en", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("INT33FC:02", 1, "dock_irq", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("INT33FC:02", 29, "dock_hpd", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio_crystalcove", 2, "board_rev", GPIO_ACTIVE_HIGH),
+ {}
+ },
+};
+
+/* Byte 0 is the length of the rest of the packet */
+static const u8 tf103c_dock_enable_cmd[9] = { 8, 0x20, 0, 0, 0, 0, 0x20, 0, 0 };
+static const u8 tf103c_dock_usb_enable_cmd[9] = { 8, 0, 0, 0, 0, 0, 0, 0x40, 0 };
+static const u8 tf103c_dock_suspend_cmd[9] = { 8, 0, 0x20, 0, 0, 0x22, 0, 0, 0 };
+
+/*** keyboard related code ***/
+
+static u8 tf103c_dock_kbd_hid_desc[] = {
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x09, 0x06, /* Usage (Keyboard), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x11, /* Report ID (17), */
+ 0x95, 0x08, /* Report Count (8), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x15, 0x00, /* Logical Minimum (0), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x05, 0x07, /* Usage Page (Keyboard), */
+ 0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */
+ 0x29, 0xE7, /* Usage Maximum (KB Right GUI), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x81, 0x01, /* Input (Constant), */
+ 0x95, 0x06, /* Report Count (6), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x15, 0x00, /* Logical Minimum (0), */
+ 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
+ 0x05, 0x07, /* Usage Page (Keyboard), */
+ 0x19, 0x00, /* Usage Minimum (None), */
+ 0x2A, 0xFF, 0x00, /* Usage Maximum (FFh), */
+ 0x81, 0x00, /* Input, */
+ 0xC0 /* End Collection */
+};
+
+static int tf103c_dock_kbd_read(struct tf103c_dock_data *dock)
+{
+ struct i2c_client *client = dock->kbd_client;
+ struct device *dev = &dock->ec_client->dev;
+ struct i2c_msg msgs[2];
+ u8 reg[2];
+ int ret;
+
+ reg[0] = TF103C_DOCK_KBD_DATA_REG & 0xff;
+ reg[1] = TF103C_DOCK_KBD_DATA_REG >> 8;
+
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = sizeof(reg);
+ msgs[0].buf = reg;
+
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = TF103C_DOCK_KBD_DATA_MAX_LENGTH;
+ msgs[1].buf = dock->kbd_buf;
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret != ARRAY_SIZE(msgs)) {
+ dev_err(dev, "error %d reading kbd data\n", ret);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void tf103c_dock_kbd_write(struct tf103c_dock_data *dock, u16 cmd)
+{
+ struct device *dev = &dock->ec_client->dev;
+ u8 buf[4];
+ int ret;
+
+ put_unaligned_le16(TF103C_DOCK_KBD_CMD_REG, &buf[0]);
+ put_unaligned_le16(cmd, &buf[2]);
+
+ ret = i2c_master_send(dock->kbd_client, buf, sizeof(buf));
+ if (ret != sizeof(buf))
+ dev_err(dev, "error %d writing kbd cmd\n", ret);
+}
+
+/* HID ll_driver functions for forwarding input-reports from the kbd_client */
+static int tf103c_dock_hid_parse(struct hid_device *hid)
+{
+ return hid_parse_report(hid, tf103c_dock_kbd_hid_desc,
+ sizeof(tf103c_dock_kbd_hid_desc));
+}
+
+static int tf103c_dock_hid_start(struct hid_device *hid)
+{
+ return 0;
+}
+
+static void tf103c_dock_hid_stop(struct hid_device *hid)
+{
+ hid->claimed = 0;
+}
+
+static int tf103c_dock_hid_open(struct hid_device *hid)
+{
+ struct tf103c_dock_data *dock = hid->driver_data;
+
+ set_bit(TF103C_DOCK_FLAG_HID_OPEN, &dock->flags);
+ return 0;
+}
+
+static void tf103c_dock_hid_close(struct hid_device *hid)
+{
+ struct tf103c_dock_data *dock = hid->driver_data;
+
+ clear_bit(TF103C_DOCK_FLAG_HID_OPEN, &dock->flags);
+}
+
+/* Mandatory, but not used */
+static int tf103c_dock_hid_raw_request(struct hid_device *hid, u8 reportnum,
+ u8 *buf, size_t len, u8 rtype, int reqtype)
+{
+ return 0;
+}
+
+struct hid_ll_driver tf103c_dock_hid_ll_driver = {
+ .parse = tf103c_dock_hid_parse,
+ .start = tf103c_dock_hid_start,
+ .stop = tf103c_dock_hid_stop,
+ .open = tf103c_dock_hid_open,
+ .close = tf103c_dock_hid_close,
+ .raw_request = tf103c_dock_hid_raw_request,
+};
+
+static int tf103c_dock_toprow_codes[13][2] = {
+ /* Normal, AltGr pressed */
+ { KEY_POWER, KEY_F1 },
+ { KEY_RFKILL, KEY_F2 },
+ { KEY_F21, KEY_F3 }, /* Touchpad toggle, userspace expects F21 */
+ { KEY_BRIGHTNESSDOWN, KEY_F4 },
+ { KEY_BRIGHTNESSUP, KEY_F5 },
+ { KEY_CAMERA, KEY_F6 },
+ { KEY_CONFIG, KEY_F7 },
+ { KEY_PREVIOUSSONG, KEY_F8 },
+ { KEY_PLAYPAUSE, KEY_F9 },
+ { KEY_NEXTSONG, KEY_F10 },
+ { KEY_MUTE, KEY_F11 },
+ { KEY_VOLUMEDOWN, KEY_F12 },
+ { KEY_VOLUMEUP, KEY_SYSRQ },
+};
+
+static void tf103c_dock_report_toprow_kbd_hook(struct tf103c_dock_data *dock)
+{
+ u8 *esc, *buf = dock->kbd_buf;
+ int size;
+
+ /*
+ * Stop AltGr reports from getting reported on the "Asus TF103C Dock
+ * Keyboard" input_dev, since this gets used as "Fn" key for the toprow
+ * keys. Instead we report this on the "Asus TF103C Dock Top Row Keys"
+ * input_dev, when not used to modify the toprow keys.
+ */
+ dock->altgr_pressed = buf[TF103C_DOCK_KBD_DATA_MODIFIERS] & 0x40;
+ buf[TF103C_DOCK_KBD_DATA_MODIFIERS] &= ~0x40;
+
+ input_report_key(dock->input, KEY_RIGHTALT, dock->altgr_pressed);
+ input_sync(dock->input);
+
+ /* Toggle fnlock on AltGr + Esc press */
+ buf = buf + TF103C_DOCK_KBD_DATA_KEYS;
+ size = TF103C_DOCK_KBD_DATA_MAX_LENGTH - TF103C_DOCK_KBD_DATA_KEYS;
+ esc = memchr(buf, 0x29, size);
+ if (!dock->esc_pressed && esc) {
+ if (dock->altgr_pressed) {
+ fnlock = !fnlock;
+ dock->filter_esc = true;
+ }
+ }
+ if (esc && dock->filter_esc)
+ *esc = 0;
+ else
+ dock->filter_esc = false;
+
+ dock->esc_pressed = esc != NULL;
+}
+
+static void tf103c_dock_toprow_press(struct tf103c_dock_data *dock, int key_code)
+{
+ /*
+ * Release AltGr before reporting the toprow key, so that userspace
+ * sees e.g. just KEY_SUSPEND and not AltGr + KEY_SUSPEND.
+ */
+ if (dock->altgr_pressed) {
+ input_report_key(dock->input, KEY_RIGHTALT, false);
+ input_sync(dock->input);
+ }
+
+ input_report_key(dock->input, key_code, true);
+ input_sync(dock->input);
+}
+
+static void tf103c_dock_toprow_release(struct tf103c_dock_data *dock, int key_code)
+{
+ input_report_key(dock->input, key_code, false);
+ input_sync(dock->input);
+
+ if (dock->altgr_pressed) {
+ input_report_key(dock->input, KEY_RIGHTALT, true);
+ input_sync(dock->input);
+ }
+}
+
+static void tf103c_dock_toprow_event(struct tf103c_dock_data *dock,
+ int toprow_index, int *last_press)
+{
+ int key_code, fn = dock->altgr_pressed ^ fnlock;
+
+ if (last_press && *last_press) {
+ tf103c_dock_toprow_release(dock, *last_press);
+ *last_press = 0;
+ }
+
+ if (toprow_index < 0)
+ return;
+
+ key_code = tf103c_dock_toprow_codes[toprow_index][fn];
+ tf103c_dock_toprow_press(dock, key_code);
+
+ if (last_press)
+ *last_press = key_code;
+ else
+ tf103c_dock_toprow_release(dock, key_code);
+}
+
+/*
+ * The keyboard sends what appears to be standard I2C-HID input-reports,
+ * except that a 16 bit register address of where the I2C-HID format
+ * input-reports are stored must be send before reading it in a single
+ * (I2C repeated-start) I2C transaction.
+ *
+ * Its unknown how to get the HID descriptors but they are easy to reconstruct:
+ *
+ * Input report id 0x11 is 8 bytes long and contain standard USB HID intf-class,
+ * Boot Interface Subclass reports.
+ * Input report id 0x13 is 2 bytes long and sends Consumer Control events
+ * Input report id 0x14 is 1 byte long and sends System Control events
+ *
+ * However the top row keys (where a normal keyboard has F1-F12 + Print-Screen)
+ * are a mess, using a mix of the 0x13 and 0x14 input reports as well as EC SCI
+ * events; and these need special handling to allow actually sending F1-F12,
+ * since the Fn key on the keyboard only works on the cursor keys and the top
+ * row keys always send their special "Multimedia hotkey" codes.
+ *
+ * So only forward the 0x11 reports to HID and handle the top-row keys here.
+ */
+static void tf103c_dock_kbd_interrupt(struct tf103c_dock_data *dock)
+{
+ struct device *dev = &dock->ec_client->dev;
+ u8 *buf = dock->kbd_buf;
+ int size;
+
+ if (tf103c_dock_kbd_read(dock))
+ return;
+
+ size = buf[0] | buf[1] << 8;
+ if (size < TF103C_DOCK_KBD_DATA_MIN_LENGTH ||
+ size > TF103C_DOCK_KBD_DATA_MAX_LENGTH) {
+ dev_err(dev, "error reported kbd pkt size %d is out of range %d-%d\n", size,
+ TF103C_DOCK_KBD_DATA_MIN_LENGTH,
+ TF103C_DOCK_KBD_DATA_MAX_LENGTH);
+ return;
+ }
+
+ switch (buf[2]) {
+ case 0x11:
+ if (size != 11)
+ break;
+
+ tf103c_dock_report_toprow_kbd_hook(dock);
+
+ if (test_bit(TF103C_DOCK_FLAG_HID_OPEN, &dock->flags))
+ hid_input_report(dock->hid, HID_INPUT_REPORT, buf + 2, size - 2, 1);
+ return;
+ case 0x13:
+ if (size != 5)
+ break;
+
+ switch (buf[3] | buf[4] << 8) {
+ case 0:
+ tf103c_dock_toprow_event(dock, -1, &dock->last_press_0x13);
+ return;
+ case 0x70:
+ tf103c_dock_toprow_event(dock, 3, &dock->last_press_0x13);
+ return;
+ case 0x6f:
+ tf103c_dock_toprow_event(dock, 4, &dock->last_press_0x13);
+ return;
+ case 0xb6:
+ tf103c_dock_toprow_event(dock, 7, &dock->last_press_0x13);
+ return;
+ case 0xcd:
+ tf103c_dock_toprow_event(dock, 8, &dock->last_press_0x13);
+ return;
+ case 0xb5:
+ tf103c_dock_toprow_event(dock, 9, &dock->last_press_0x13);
+ return;
+ case 0xe2:
+ tf103c_dock_toprow_event(dock, 10, &dock->last_press_0x13);
+ return;
+ case 0xea:
+ tf103c_dock_toprow_event(dock, 11, &dock->last_press_0x13);
+ return;
+ case 0xe9:
+ tf103c_dock_toprow_event(dock, 12, &dock->last_press_0x13);
+ return;
+ }
+ break;
+ case 0x14:
+ if (size != 4)
+ break;
+
+ switch (buf[3]) {
+ case 0:
+ tf103c_dock_toprow_event(dock, -1, &dock->last_press_0x14);
+ return;
+ case 1:
+ tf103c_dock_toprow_event(dock, 0, &dock->last_press_0x14);
+ return;
+ }
+ break;
+ }
+
+ dev_warn(dev, "warning unknown kbd data: %*ph\n", size, buf);
+}
+
+/*** touchpad related code ***/
+
+static const struct property_entry tf103c_dock_touchpad_props[] = {
+ PROPERTY_ENTRY_BOOL("elan,clickpad"),
+ { }
+};
+
+static const struct software_node tf103c_dock_touchpad_sw_node = {
+ .properties = tf103c_dock_touchpad_props,
+};
+
+/*
+ * tf103c_enable_touchpad() is only called from the threaded interrupt handler
+ * and tf103c_disable_touchpad() is only called after the irq is disabled,
+ * so no locking is necessary.
+ */
+static void tf103c_dock_enable_touchpad(struct tf103c_dock_data *dock)
+{
+ struct i2c_board_info board_info = { };
+ struct device *dev = &dock->ec_client->dev;
+ int ret;
+
+ if (dock->tp_enabled) {
+ /* Happens after resume, the tp needs to be reinitialized */
+ ret = device_reprobe(&dock->tp_client->dev);
+ if (ret)
+ dev_err_probe(dev, ret, "reprobing tp-client\n");
+ return;
+ }
+
+ strscpy(board_info.type, "elan_i2c", I2C_NAME_SIZE);
+ board_info.addr = TF103C_DOCK_TP_ADDR;
+ board_info.dev_name = TF103C_DOCK_DEV_NAME "-tp";
+ board_info.irq = dock->tp_irq;
+ board_info.swnode = &tf103c_dock_touchpad_sw_node;
+
+ dock->tp_client = i2c_new_client_device(dock->ec_client->adapter, &board_info);
+ if (IS_ERR(dock->tp_client)) {
+ dev_err(dev, "error %ld creating tp client\n", PTR_ERR(dock->tp_client));
+ return;
+ }
+
+ dock->tp_enabled = true;
+}
+
+static void tf103c_dock_disable_touchpad(struct tf103c_dock_data *dock)
+{
+ if (!dock->tp_enabled)
+ return;
+
+ i2c_unregister_device(dock->tp_client);
+
+ dock->tp_enabled = false;
+}
+
+/*** interrupt handling code ***/
+static void tf103c_dock_ec_cmd(struct tf103c_dock_data *dock, const u8 *cmd)
+{
+ struct device *dev = &dock->ec_client->dev;
+ int ret;
+
+ ret = i2c_smbus_write_i2c_block_data(dock->ec_client, TF103C_DOCK_EC_CMD_REG,
+ TF103C_DOCK_EC_CMD_LEN, cmd);
+ if (ret)
+ dev_err(dev, "error %d sending %*ph cmd\n", ret,
+ TF103C_DOCK_EC_CMD_LEN, cmd);
+}
+
+static void tf103c_dock_sci(struct tf103c_dock_data *dock, u8 val)
+{
+ struct device *dev = &dock->ec_client->dev;
+
+ switch (val) {
+ case 2:
+ tf103c_dock_toprow_event(dock, 1, NULL);
+ return;
+ case 4:
+ tf103c_dock_toprow_event(dock, 2, NULL);
+ return;
+ case 8:
+ tf103c_dock_toprow_event(dock, 5, NULL);
+ return;
+ case 17:
+ tf103c_dock_toprow_event(dock, 6, NULL);
+ return;
+ }
+
+ dev_warn(dev, "warning unknown SCI value: 0x%02x\n", val);
+}
+
+static void tf103c_dock_smi(struct tf103c_dock_data *dock, u8 val)
+{
+ struct device *dev = &dock->ec_client->dev;
+
+ switch (val) {
+ case TF103C_DOCK_SMI_EC_WAKEUP:
+ tf103c_dock_ec_cmd(dock, tf103c_dock_enable_cmd);
+ tf103c_dock_ec_cmd(dock, tf103c_dock_usb_enable_cmd);
+ tf103c_dock_kbd_write(dock, TF103C_DOCK_KBD_CMD_ENABLE);
+ break;
+ case TF103C_DOCK_SMI_PAD_BL_CHANGE:
+ /* There is no backlight, but the EC still sends this */
+ break;
+ case TF103C_DOCK_SMI_HID_STATUS_CHANGED:
+ tf103c_dock_enable_touchpad(dock);
+ break;
+ default:
+ dev_warn(dev, "warning unknown SMI value: 0x%02x\n", val);
+ break;
+ }
+}
+
+static irqreturn_t tf103c_dock_irq(int irq, void *data)
+{
+ struct tf103c_dock_data *dock = data;
+ struct device *dev = &dock->ec_client->dev;
+ u8 intr_data[8];
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(dock->intr_client, TF103C_DOCK_INTR_DATA_REG,
+ sizeof(intr_data), intr_data);
+ if (ret != sizeof(intr_data)) {
+ dev_err(dev, "error %d reading intr data\n", ret);
+ return IRQ_NONE;
+ }
+
+ if (!(intr_data[1] & TF103C_DOCK_INTR_DATA1_OBF_MASK))
+ return IRQ_NONE;
+
+ /* intr_data[0] is the length of the rest of the packet */
+ if (intr_data[0] == 3 && intr_data[1] == TF103C_DOCK_INTR_DATA1_OOB_VALUE &&
+ intr_data[2] == TF103C_DOCK_INTR_DATA2_OOB_VALUE) {
+ /* intr_data[3] seems to contain a HID input report id */
+ switch (intr_data[3]) {
+ case 0x01:
+ handle_nested_irq(dock->tp_irq);
+ break;
+ case 0x11:
+ case 0x13:
+ case 0x14:
+ tf103c_dock_kbd_interrupt(dock);
+ break;
+ default:
+ dev_warn(dev, "warning unknown intr_data[3]: 0x%02x\n", intr_data[3]);
+ break;
+ }
+ return IRQ_HANDLED;
+ }
+
+ if (intr_data[1] & TF103C_DOCK_INTR_DATA1_SCI_MASK) {
+ tf103c_dock_sci(dock, intr_data[2]);
+ return IRQ_HANDLED;
+ }
+
+ if (intr_data[1] & TF103C_DOCK_INTR_DATA1_SMI_MASK) {
+ tf103c_dock_smi(dock, intr_data[2]);
+ return IRQ_HANDLED;
+ }
+
+ dev_warn(dev, "warning unknown intr data: %*ph\n", 8, intr_data);
+ return IRQ_NONE;
+}
+
+/*
+ * tf103c_dock_[dis|en]able only run from hpd_work or at times when
+ * hpd_work cannot run (hpd_irq disabled), so no locking is necessary.
+ */
+static void tf103c_dock_enable(struct tf103c_dock_data *dock)
+{
+ if (dock->enabled)
+ return;
+
+ if (dock->board_rev != 2)
+ gpiod_set_value(dock->pwr_en, 1);
+
+ msleep(500);
+ enable_irq(dock->irq);
+
+ dock->enabled = true;
+}
+
+static void tf103c_dock_disable(struct tf103c_dock_data *dock)
+{
+ if (!dock->enabled)
+ return;
+
+ disable_irq(dock->irq);
+ tf103c_dock_disable_touchpad(dock);
+ if (dock->board_rev != 2)
+ gpiod_set_value(dock->pwr_en, 0);
+
+ dock->enabled = false;
+}
+
+static void tf103c_dock_hpd_work(struct work_struct *work)
+{
+ struct tf103c_dock_data *dock =
+ container_of(work, struct tf103c_dock_data, hpd_work.work);
+
+ if (gpiod_get_value(dock->hpd_gpio))
+ tf103c_dock_enable(dock);
+ else
+ tf103c_dock_disable(dock);
+}
+
+static irqreturn_t tf103c_dock_hpd_irq(int irq, void *data)
+{
+ struct tf103c_dock_data *dock = data;
+
+ mod_delayed_work(system_long_wq, &dock->hpd_work, TF103C_DOCK_HPD_DEBOUNCE);
+ return IRQ_HANDLED;
+}
+
+static void tf103c_dock_start_hpd(struct tf103c_dock_data *dock)
+{
+ enable_irq(dock->hpd_irq);
+ /* Sync current HPD status */
+ queue_delayed_work(system_long_wq, &dock->hpd_work, TF103C_DOCK_HPD_DEBOUNCE);
+}
+
+static void tf103c_dock_stop_hpd(struct tf103c_dock_data *dock)
+{
+ disable_irq(dock->hpd_irq);
+ cancel_delayed_work_sync(&dock->hpd_work);
+}
+
+/*** probe ***/
+
+static const struct dmi_system_id tf103c_dock_dmi_ids[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"),
+ },
+ },
+ { }
+};
+
+static void tf103c_dock_non_devm_cleanup(void *data)
+{
+ struct tf103c_dock_data *dock = data;
+
+ if (dock->tp_irq_domain)
+ irq_domain_remove(dock->tp_irq_domain);
+
+ if (!IS_ERR_OR_NULL(dock->hid))
+ hid_destroy_device(dock->hid);
+
+ i2c_unregister_device(dock->kbd_client);
+ i2c_unregister_device(dock->intr_client);
+ gpiod_remove_lookup_table(&tf103c_dock_gpios);
+}
+
+static int tf103c_dock_probe(struct i2c_client *client)
+{
+ struct i2c_board_info board_info = { };
+ struct device *dev = &client->dev;
+ struct gpio_desc *board_rev_gpio;
+ struct tf103c_dock_data *dock;
+ enum gpiod_flags flags;
+ int i, ret;
+
+ /* GPIOs are hardcoded for the Asus TF103C, don't bind on other devs */
+ if (!dmi_check_system(tf103c_dock_dmi_ids))
+ return -ENODEV;
+
+ dock = devm_kzalloc(dev, sizeof(*dock), GFP_KERNEL);
+ if (!dock)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&dock->hpd_work, tf103c_dock_hpd_work);
+
+ /* 1. Get GPIOs and their IRQs */
+ gpiod_add_lookup_table(&tf103c_dock_gpios);
+
+ ret = devm_add_action_or_reset(dev, tf103c_dock_non_devm_cleanup, dock);
+ if (ret)
+ return ret;
+
+ /*
+ * The pin is configured as input by default, use ASIS because otherwise
+ * the gpio-crystalcove.c switches off the internal pull-down replacing
+ * it with a pull-up.
+ */
+ board_rev_gpio = gpiod_get(dev, "board_rev", GPIOD_ASIS);
+ if (IS_ERR(board_rev_gpio))
+ return dev_err_probe(dev, PTR_ERR(board_rev_gpio), "requesting board_rev GPIO\n");
+ dock->board_rev = gpiod_get_value_cansleep(board_rev_gpio) + 1;
+ gpiod_put(board_rev_gpio);
+
+ /*
+ * The Android driver drives the dock-pwr-en pin high at probe for
+ * revision 2 boards and then never touches it again?
+ * This code has only been tested on a revision 1 board, so for now
+ * just mimick what Android does on revision 2 boards.
+ */
+ flags = (dock->board_rev == 2) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+ dock->pwr_en = devm_gpiod_get(dev, "dock_pwr_en", flags);
+ if (IS_ERR(dock->pwr_en))
+ return dev_err_probe(dev, PTR_ERR(dock->pwr_en), "requesting pwr_en GPIO\n");
+
+ dock->irq_gpio = devm_gpiod_get(dev, "dock_irq", GPIOD_IN);
+ if (IS_ERR(dock->irq_gpio))
+ return dev_err_probe(dev, PTR_ERR(dock->irq_gpio), "requesting IRQ GPIO\n");
+
+ dock->irq = gpiod_to_irq(dock->irq_gpio);
+ if (dock->irq < 0)
+ return dev_err_probe(dev, dock->irq, "getting dock IRQ");
+
+ ret = devm_request_threaded_irq(dev, dock->irq, NULL, tf103c_dock_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ "dock_irq", dock);
+ if (ret)
+ return dev_err_probe(dev, ret, "requesting dock IRQ");
+
+ dock->hpd_gpio = devm_gpiod_get(dev, "dock_hpd", GPIOD_IN);
+ if (IS_ERR(dock->hpd_gpio))
+ return dev_err_probe(dev, PTR_ERR(dock->hpd_gpio), "requesting HPD GPIO\n");
+
+ dock->hpd_irq = gpiod_to_irq(dock->hpd_gpio);
+ if (dock->hpd_irq < 0)
+ return dev_err_probe(dev, dock->hpd_irq, "getting HPD IRQ");
+
+ ret = devm_request_irq(dev, dock->hpd_irq, tf103c_dock_hpd_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN,
+ "dock_hpd", dock);
+ if (ret)
+ return ret;
+
+ /*
+ * 2. Create I2C clients. The dock uses 4 different i2c addresses,
+ * the ACPI NPCE69A node being probed points to the EC address.
+ */
+ dock->ec_client = client;
+
+ strscpy(board_info.type, "tf103c-dock-intr", I2C_NAME_SIZE);
+ board_info.addr = TF103C_DOCK_INTR_ADDR;
+ board_info.dev_name = TF103C_DOCK_DEV_NAME "-intr";
+
+ dock->intr_client = i2c_new_client_device(client->adapter, &board_info);
+ if (IS_ERR(dock->intr_client))
+ return dev_err_probe(dev, PTR_ERR(dock->intr_client), "creating intr client\n");
+
+ strscpy(board_info.type, "tf103c-dock-kbd", I2C_NAME_SIZE);
+ board_info.addr = TF103C_DOCK_KBD_ADDR;
+ board_info.dev_name = TF103C_DOCK_DEV_NAME "-kbd";
+
+ dock->kbd_client = i2c_new_client_device(client->adapter, &board_info);
+ if (IS_ERR(dock->kbd_client))
+ return dev_err_probe(dev, PTR_ERR(dock->kbd_client), "creating kbd client\n");
+
+ /* 3. Create input_dev for the top row of the keyboard */
+ dock->input = devm_input_allocate_device(dev);
+ if (!dock->input)
+ return -ENOMEM;
+
+ dock->input->name = "Asus TF103C Dock Top Row Keys";
+ dock->input->phys = dev_name(dev);
+ dock->input->dev.parent = dev;
+ dock->input->id.bustype = BUS_I2C;
+ dock->input->id.vendor = /* USB_VENDOR_ID_ASUSTEK */
+ dock->input->id.product = /* From TF-103-C */
+ dock->input->id.version = 0x0100; /* 1.0 */
+
+ for (i = 0; i < ARRAY_SIZE(tf103c_dock_toprow_codes); i++) {
+ input_set_capability(dock->input, EV_KEY, tf103c_dock_toprow_codes[i][0]);
+ input_set_capability(dock->input, EV_KEY, tf103c_dock_toprow_codes[i][1]);
+ }
+ input_set_capability(dock->input, EV_KEY, KEY_RIGHTALT);
+
+ ret = input_register_device(dock->input);
+ if (ret)
+ return ret;
+
+ /* 4. Create HID device for the keyboard */
+ dock->hid = hid_allocate_device();
+ if (IS_ERR(dock->hid))
+ return dev_err_probe(dev, PTR_ERR(dock->hid), "allocating hid dev\n");
+
+ dock->hid->driver_data = dock;
+ dock->hid->ll_driver = &tf103c_dock_hid_ll_driver;
+ dock->hid->dev.parent = &client->dev;
+ dock->hid->bus = BUS_I2C;
+ dock->hid->vendor = 0x0b05; /* USB_VENDOR_ID_ASUSTEK */
+ dock->hid->product = 0x0103; /* From TF-103-C */
+ dock->hid->version = 0x0100; /* 1.0 */
+ strscpy(dock->hid->name, "Asus TF103C Dock Keyboard", sizeof(dock->hid->name));
+ strscpy(dock->hid->phys, dev_name(dev), sizeof(dock->hid->phys));
+
+ ret = hid_add_device(dock->hid);
+ if (ret)
+ return dev_err_probe(dev, ret, "adding hid dev\n");
+
+ /* 5. Setup irqchip for touchpad IRQ pass-through */
+ dock->tp_irqchip.name = KBUILD_MODNAME;
+
+ dock->tp_irq_domain = irq_domain_add_linear(NULL, 1, &irq_domain_simple_ops, NULL);
+ if (!dock->tp_irq_domain)
+ return -ENOMEM;
+
+ dock->tp_irq = irq_create_mapping(dock->tp_irq_domain, 0);
+ if (!dock->tp_irq)
+ return -ENOMEM;
+
+ irq_set_chip_data(dock->tp_irq, dock);
+ irq_set_chip_and_handler(dock->tp_irq, &dock->tp_irqchip, handle_simple_irq);
+ irq_set_nested_thread(dock->tp_irq, true);
+ irq_set_noprobe(dock->tp_irq);
+
+ dev_info(dev, "Asus TF103C board-revision: %d\n", dock->board_rev);
+
+ tf103c_dock_start_hpd(dock);
+
+ device_init_wakeup(dev, true);
+ i2c_set_clientdata(client, dock);
+ return 0;
+}
+
+static int tf103c_dock_remove(struct i2c_client *client)
+{
+ struct tf103c_dock_data *dock = i2c_get_clientdata(client);
+
+ tf103c_dock_stop_hpd(dock);
+ tf103c_dock_disable(dock);
+
+ return 0;
+}
+
+static int __maybe_unused tf103c_dock_suspend(struct device *dev)
+{
+ struct tf103c_dock_data *dock = dev_get_drvdata(dev);
+
+ tf103c_dock_stop_hpd(dock);
+
+ if (dock->enabled) {
+ tf103c_dock_ec_cmd(dock, tf103c_dock_suspend_cmd);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(dock->irq);
+ }
+
+ return 0;
+}
+
+static int __maybe_unused tf103c_dock_resume(struct device *dev)
+{
+ struct tf103c_dock_data *dock = dev_get_drvdata(dev);
+
+ if (dock->enabled) {
+ if (device_may_wakeup(dev))
+ disable_irq_wake(dock->irq);
+
+ /* Don't try to resume if the dock was unplugged during suspend */
+ if (gpiod_get_value(dock->hpd_gpio))
+ tf103c_dock_ec_cmd(dock, tf103c_dock_enable_cmd);
+ }
+
+ tf103c_dock_start_hpd(dock);
+ return 0;
+}
+
+SIMPLE_DEV_PM_OPS(tf103c_dock_pm_ops, tf103c_dock_suspend, tf103c_dock_resume);
+
+static const struct acpi_device_id tf103c_dock_acpi_match[] = {
+ {"NPCE69A"},
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, tf103c_dock_acpi_match);
+
+static struct i2c_driver tf103c_dock_driver = {
+ .driver = {
+ .name = "asus-tf103c-dock",
+ .pm = &tf103c_dock_pm_ops,
+ .acpi_match_table = tf103c_dock_acpi_match,
+ },
+ .probe_new = tf103c_dock_probe,
+ .remove = tf103c_dock_remove,
+};
+module_i2c_driver(tf103c_dock_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com");
+MODULE_DESCRIPTION("X86 Android tablets DSDT fixups driver");
+MODULE_LICENSE("GPL");
projects / users / hch / xfs.git / commitdiff