arm64: dts: ti: k3-am69-sk: Mark tps659413 regulators as bootph-all

In order for the MCU domain to access this PMIC, a regulator
needs to be marked appropriately otherwise it is not seen by SPL and
therefore not configured.

This is necessary if the MCU domain is to program the TPS6594 MCU ESM
state machine, which is required to wire up the watchdog in a manner
that will reset the board.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Enric Balletbo i Serra <eballetb@redhat.com>
Link: https://lore.kernel.org/r/20241113-b4-j784s4-tps6594-bootph-v4-2-102ddaa1bdc6@redhat.com
Signed-off-by: Nishanth Menon <nm@ti.com>

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 1e36965a14032ca07143230855e04b9549f1d0d1..5f24a1608bdc4fef0610e2ba9a210264e3c4917e 100644 (file)
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -755,6 +755,7 @@
                                regulator-max-microvolt = <1100000>;
                                regulator-boot-on;
                                regulator-always-on;
+                               bootph-all;
                        };
 
                        bucka3: buck3 {
@@ -763,6 +764,7 @@
                                regulator-max-microvolt = <850000>;
                                regulator-boot-on;
                                regulator-always-on;
+                               bootph-all;
                        };
 
                        bucka4: buck4 {
@@ -771,6 +773,7 @@
                                regulator-max-microvolt = <1800000>;
                                regulator-boot-on;
                                regulator-always-on;
+                               bootph-all;
                        };
 
                        bucka5: buck5 {
@@ -779,6 +782,7 @@
                                regulator-max-microvolt = <850000>;
                                regulator-boot-on;
                                regulator-always-on;
+                               bootph-all;
                        };
 
                        ldoa1: ldo1 {
@@ -787,6 +791,7 @@
                                regulator-max-microvolt = <1800000>;
                                regulator-boot-on;
                                regulator-always-on;
+                               bootph-all;
                        };
 
                        ldoa2: ldo2 {
@@ -795,6 +800,7 @@
                                regulator-max-microvolt = <3300000>;
                                regulator-boot-on;
                                regulator-always-on;
+                               bootph-all;
                        };
 
                        ldoa3: ldo3 {
@@ -803,6 +809,7 @@
                                regulator-max-microvolt = <800000>;
                                regulator-boot-on;
                                regulator-always-on;
+                               bootph-all;
                        };
 
                        ldoa4: ldo4 {
@@ -811,6 +818,7 @@
                                regulator-max-microvolt = <1800000>;
                                regulator-boot-on;
                                regulator-always-on;
+                               bootph-all;
                        };
                };
        };