mfd: max597x: Add support for MAX5970 and MAX5978

Implement a regulator driver with IRQ support for fault management.
Written against documentation [1] and [2] and tested on real hardware.

Every channel has it's own regulator supply nammed 'vss1-supply' and
'vss2-supply'. The regulator supply is used to determine the output
voltage, as the smart switch provides no output regulation.
The driver requires the 'shunt-resistor-micro-ohms' to be present in
the devicetree to properly calculate current related values.

You must specify compatible devictree layout:

regulator@3a {
        reg = <0x3a>;
        vss1-supply = <&p3v3>;
        compatible = "maxim,max5978";

        ...

        regulators {
                sw0_ref: SW0 {
                        regulator-compatible = "SW0";
                        shunt-resistor-micro-ohms = <12000>;
                        ...
                }
        }
}

1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf

...
Changes in V12:
- Use simple_mfd_i2c driver and remove previous implementation.
- Remove newline
- Use _MFD_MAX597X_H in header file
- Successfull build need following patch from regulator:
https://lore.kernel.org/r/20230216075302.68935-1-Naresh.Solanki@9elements.com
https://lore.kernel.org/r/20230210163225.1208035-1-Naresh.Solanki@9elements.com

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230307121246.127425-2-Naresh.Solanki@9elements.com

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fcc141e067b9b80765d448c0e270c60631c8bbd8..d381d0e63455adf2e866b23aac4a1658d78b2ca3 100644 (file)
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -266,6 +266,16 @@ config MFD_MADERA_SPI
          Support for the Cirrus Logic Madera platform audio SoC
          core functionality controlled via SPI.
 
+config MFD_MAX597X
+       tristate "Maxim 597x power switch and monitor"
+       depends on (I2C && OF)
+       select MFD_SIMPLE_MFD_I2C
+       help
+         This driver controls a Maxim 5970/5978 switch via I2C bus.
+         The MAX5970/5978 is a smart switch with no output regulation, but
+         fault protection and voltage and current monitoring capabilities.
+         Also it supports upto 4 indication leds.
+
 config MFD_CS47L15
        bool "Cirrus Logic CS47L15"
        select PINCTRL_CS47L15

diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index e31f13fd6a79b2182c766d960aa823a6cc8e5567..20782b4dd17240c2a569c78dae912ff3ede26bde 100644 (file)
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -72,9 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = {
        .mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
 };
 
+static const struct mfd_cell max597x_cells[] = {
+       { .name = "max597x-regulator", },
+       { .name = "max597x-iio", },
+       { .name = "max597x-led", },
+};
+
+static const struct simple_mfd_data maxim_max597x = {
+       .mfd_cell = max597x_cells,
+       .mfd_cell_size = ARRAY_SIZE(max597x_cells),
+};
+
 static const struct of_device_id simple_mfd_i2c_of_match[] = {
        { .compatible = "kontron,sl28cpld" },
        { .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
+       { .compatible = "maxim,max5970", .data = &maxim_max597x},
+       { .compatible = "maxim,max5978", .data = &maxim_max597x},
        {}
 };
 MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);

diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max597x.h
new file mode 100644 (file)
index 0000000..a850b2e
--- /dev/null
+++ b/include/linux/mfd/max597x.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device driver for regulators in MAX5970 and MAX5978 IC
+ *
+ * Copyright (c) 2022 9elements GmbH
+ *
+ * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
+ */
+
+#ifndef _MFD_MAX597X_H
+#define _MFD_MAX597X_H
+
+#include <linux/regmap.h>
+
+#define MAX5970_NUM_SWITCHES 2
+#define MAX5978_NUM_SWITCHES 1
+#define MAX597X_NUM_LEDS     4
+
+struct max597x_data {
+       int num_switches;
+       u32 irng[MAX5970_NUM_SWITCHES];
+       u32 mon_rng[MAX5970_NUM_SWITCHES];
+       u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
+};
+
+enum max597x_chip_type {
+       MAX597x_TYPE_MAX5978 = 1,
+       MAX597x_TYPE_MAX5970,
+};
+
+#define MAX5970_REG_CURRENT_L(ch)              (0x01 + (ch) * 4)
+#define MAX5970_REG_CURRENT_H(ch)              (0x00 + (ch) * 4)
+#define MAX5970_REG_VOLTAGE_L(ch)              (0x03 + (ch) * 4)
+#define MAX5970_REG_VOLTAGE_H(ch)              (0x02 + (ch) * 4)
+#define MAX5970_REG_MON_RANGE                  0x18
+#define  MAX5970_MON_MASK                      0x3
+#define  MAX5970_MON(reg, ch)                  (((reg) >> ((ch) * 2)) & MAX5970_MON_MASK)
+#define  MAX5970_MON_MAX_RANGE_UV              16000000
+
+#define MAX5970_REG_CH_UV_WARN_H(ch)           (0x1A + (ch) * 10)
+#define MAX5970_REG_CH_UV_WARN_L(ch)           (0x1B + (ch) * 10)
+#define MAX5970_REG_CH_UV_CRIT_H(ch)           (0x1C + (ch) * 10)
+#define MAX5970_REG_CH_UV_CRIT_L(ch)           (0x1D + (ch) * 10)
+#define MAX5970_REG_CH_OV_WARN_H(ch)           (0x1E + (ch) * 10)
+#define MAX5970_REG_CH_OV_WARN_L(ch)           (0x1F + (ch) * 10)
+#define MAX5970_REG_CH_OV_CRIT_H(ch)           (0x20 + (ch) * 10)
+#define MAX5970_REG_CH_OV_CRIT_L(ch)           (0x21 + (ch) * 10)
+
+#define  MAX5970_VAL2REG_H(x)          (((x) >> 2) & 0xFF)
+#define  MAX5970_VAL2REG_L(x)          ((x) & 0x3)
+
+#define MAX5970_REG_DAC_FAST(ch)       (0x2E + (ch))
+
+#define MAX5970_FAST2SLOW_RATIO                200
+
+#define MAX5970_REG_STATUS0            0x31
+#define  MAX5970_CB_IFAULTF(ch)                (1 << (ch))
+#define  MAX5970_CB_IFAULTS(ch)                (1 << ((ch) + 4))
+
+#define MAX5970_REG_STATUS1            0x32
+#define  STATUS1_PROT_MASK             0x3
+#define  STATUS1_PROT(reg) \
+       (((reg) >> 6) & STATUS1_PROT_MASK)
+#define  STATUS1_PROT_SHUTDOWN         0
+#define  STATUS1_PROT_CLEAR_PG         1
+#define  STATUS1_PROT_ALERT_ONLY       2
+
+#define MAX5970_REG_STATUS2            0x33
+#define  MAX5970_IRNG_MASK             0x3
+#define  MAX5970_IRNG(reg, ch) \
+       (((reg) >> ((ch) * 2)) & MAX5970_IRNG_MASK)
+
+#define MAX5970_REG_STATUS3            0x34
+#define  MAX5970_STATUS3_ALERT         BIT(4)
+#define  MAX5970_STATUS3_PG(ch)                BIT(ch)
+
+#define MAX5970_REG_FAULT0             0x35
+#define  UV_STATUS_WARN(ch)            (1 << (ch))
+#define  UV_STATUS_CRIT(ch)            (1 << ((ch) + 4))
+
+#define MAX5970_REG_FAULT1             0x36
+#define  OV_STATUS_WARN(ch)            (1 << (ch))
+#define  OV_STATUS_CRIT(ch)            (1 << ((ch) + 4))
+
+#define MAX5970_REG_FAULT2             0x37
+#define  OC_STATUS_WARN(ch)            (1 << (ch))
+
+#define MAX5970_REG_CHXEN              0x3b
+#define  CHXEN(ch)                     (3 << ((ch) * 2))
+
+#define MAX5970_REG_LED_FLASH          0x43
+
+#define MAX_REGISTERS                  0x49
+#define ADC_MASK                       0x3FF
+
+#endif                         /* _MFD_MAX597X_H */