arm64: dts: rockchip: Fix UART pull-ups on rk3328

[ Upstream commit 94dad6bed3c86c00050bf7c2b2ad6b630facae31 ]

For UARTs, the local pull-ups should be on the RX pin, not the TX pin.
UARTs transmit active-low, so a disconnected RX pin should be pulled
high instead of left floating to prevent noise being interpreted as
transmissions.

This gets rid of bogus sysrq events when the UART console is not
connected.

Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201204064805.6480-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index c34daae3c37c2dcb85b2e37e744baceb1409be0d..6c3684885fac004b90f0cae58a6dc57fc997ec75 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -1062,8 +1062,8 @@
 
                uart0 {
                        uart0_xfer: uart0-xfer {
-                               rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>,
-                                               <1 RK_PB0 1 &pcfg_pull_none>;
+                               rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>,
+                                               <1 RK_PB0 1 &pcfg_pull_up>;
                        };
 
                        uart0_cts: uart0-cts {
@@ -1081,8 +1081,8 @@
 
                uart1 {
                        uart1_xfer: uart1-xfer {
-                               rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>,
-                                               <3 RK_PA6 4 &pcfg_pull_none>;
+                               rockchip,pins = <3 RK_PA4 4 &pcfg_pull_none>,
+                                               <3 RK_PA6 4 &pcfg_pull_up>;
                        };
 
                        uart1_cts: uart1-cts {
@@ -1100,15 +1100,15 @@
 
                uart2-0 {
                        uart2m0_xfer: uart2m0-xfer {
-                               rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>,
-                                               <1 RK_PA1 2 &pcfg_pull_none>;
+                               rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>,
+                                               <1 RK_PA1 2 &pcfg_pull_up>;
                        };
                };
 
                uart2-1 {
                        uart2m1_xfer: uart2m1-xfer {
-                               rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>,
-                                               <2 RK_PA1 1 &pcfg_pull_none>;
+                               rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
+                                               <2 RK_PA1 1 &pcfg_pull_up>;
                        };
                };