This patch adds sysc definitions to the wdt1 hwmod entry, which in-turn
makes sure that sysc idle bit-fields are configured to valid state on
enable/disable callbacks.
With the recent submitted patch from Santosh Shilimkar,
"ARM: OMAP2+: hwmod: Don't call _init_mpu_rt_base if no sysc"
(commit: 
4a98c2d89), it is required to add sysconf
information to each valid hwmod entry, else device will not be
come out from idle state properly and leads to below kernel
crash  -
[2.190237] Unhandled fault: external abort on non-linefetch (0x1028) at
0xf9e35034
[2.198325] Internal error: : 1028 [#1] SMP ARM
[2.203101] Modules linked in:
[2.206334] CPU: 0    Not tainted  (
3.9.0-rc3-00059-gd114294#1)
[2.212679] PC is at omap_wdt_disable.clone.5+0xc/0x60
[2.218090] LR is at omap_wdt_probe+0x184/0x1fc
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit Cousson <benoit.cousson@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
 #include "prm-regbits-33xx.h"
 #include "i2c.h"
 #include "mmc.h"
+#include "wd_timer.h"
 
 /*
  * IP blocks
 };
 
 /* 'wd_timer' class */
+static struct omap_hwmod_class_sysconfig wdt_sysc = {
+       .rev_offs       = 0x0,
+       .sysc_offs      = 0x10,
+       .syss_offs      = 0x14,
+       .sysc_flags     = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+                       SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+       .idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+                       SIDLE_SMART_WKUP),
+       .sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
        .name           = "wd_timer",
+       .sysc           = &wdt_sysc,
+       .pre_shutdown   = &omap2_wd_timer_disable,
 };
 
 /*
        .name           = "wd_timer2",
        .class          = &am33xx_wd_timer_hwmod_class,
        .clkdm_name     = "l4_wkup_clkdm",
+       .flags          = HWMOD_SWSUP_SIDLE,
        .main_clk       = "wdt1_fck",
        .prcm           = {
                .omap4  = {