#include <net/dsa.h>
#include "felix.h"
-static int felix_tag_8021q_rxvlan_add(struct felix *felix, int port, u16 vid,
- bool pvid, bool untagged)
+/* Set up VCAP ES0 rules for pushing a tag_8021q VLAN towards the CPU such that
+ * the tagger can perform RX source port identification.
+ */
+static int felix_tag_8021q_vlan_add_rx(struct felix *felix, int port, u16 vid)
{
struct ocelot_vcap_filter *outer_tagging_rule;
struct ocelot *ocelot = &felix->ocelot;
return err;
}
-static int felix_tag_8021q_txvlan_add(struct felix *felix, int port, u16 vid,
- bool pvid, bool untagged)
+static int felix_tag_8021q_vlan_del_rx(struct felix *felix, int port, u16 vid)
+{
+ struct ocelot_vcap_filter *outer_tagging_rule;
+ struct ocelot_vcap_block *block_vcap_es0;
+ struct ocelot *ocelot = &felix->ocelot;
+
+ block_vcap_es0 = &ocelot->block[VCAP_ES0];
+
+ outer_tagging_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_es0,
+ port, false);
+ if (!outer_tagging_rule)
+ return -ENOENT;
+
+ return ocelot_vcap_filter_del(ocelot, outer_tagging_rule);
+}
+
+/* Set up VCAP IS1 rules for stripping the tag_8021q VLAN on TX and VCAP IS2
+ * rules for steering those tagged packets towards the correct destination port
+ */
+static int felix_tag_8021q_vlan_add_tx(struct felix *felix, int port, u16 vid)
{
struct ocelot_vcap_filter *untagging_rule, *redirect_rule;
struct ocelot *ocelot = &felix->ocelot;
struct dsa_switch *ds = felix->ds;
int upstream, err;
- /* tag_8021q.c assumes we are implementing this via port VLAN
- * membership, which we aren't. So we don't need to add any VCAP filter
- * for the CPU port.
- */
- if (ocelot->ports[port]->is_dsa_8021q_cpu)
- return 0;
-
untagging_rule = kzalloc(sizeof(struct ocelot_vcap_filter), GFP_KERNEL);
if (!untagging_rule)
return -ENOMEM;
return 0;
}
-static int felix_tag_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid,
- u16 flags)
-{
- bool untagged = flags & BRIDGE_VLAN_INFO_UNTAGGED;
- bool pvid = flags & BRIDGE_VLAN_INFO_PVID;
- struct ocelot *ocelot = ds->priv;
-
- if (vid_is_dsa_8021q_rxvlan(vid))
- return felix_tag_8021q_rxvlan_add(ocelot_to_felix(ocelot),
- port, vid, pvid, untagged);
-
- if (vid_is_dsa_8021q_txvlan(vid))
- return felix_tag_8021q_txvlan_add(ocelot_to_felix(ocelot),
- port, vid, pvid, untagged);
-
- return 0;
-}
-
-static int felix_tag_8021q_rxvlan_del(struct felix *felix, int port, u16 vid)
-{
- struct ocelot_vcap_filter *outer_tagging_rule;
- struct ocelot_vcap_block *block_vcap_es0;
- struct ocelot *ocelot = &felix->ocelot;
-
- block_vcap_es0 = &ocelot->block[VCAP_ES0];
-
- outer_tagging_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_es0,
- port, false);
- if (!outer_tagging_rule)
- return -ENOENT;
-
- return ocelot_vcap_filter_del(ocelot, outer_tagging_rule);
-}
-
-static int felix_tag_8021q_txvlan_del(struct felix *felix, int port, u16 vid)
+static int felix_tag_8021q_vlan_del_tx(struct felix *felix, int port, u16 vid)
{
struct ocelot_vcap_filter *untagging_rule, *redirect_rule;
struct ocelot_vcap_block *block_vcap_is1;
struct ocelot *ocelot = &felix->ocelot;
int err;
- if (ocelot->ports[port]->is_dsa_8021q_cpu)
- return 0;
-
block_vcap_is1 = &ocelot->block[VCAP_IS1];
block_vcap_is2 = &ocelot->block[VCAP_IS2];
redirect_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_is2,
port, false);
if (!redirect_rule)
- return 0;
+ return -ENOENT;
return ocelot_vcap_filter_del(ocelot, redirect_rule);
}
+static int felix_tag_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid,
+ u16 flags)
+{
+ struct ocelot *ocelot = ds->priv;
+ int err;
+
+ /* tag_8021q.c assumes we are implementing this via port VLAN
+ * membership, which we aren't. So we don't need to add any VCAP filter
+ * for the CPU port.
+ */
+ if (!dsa_is_user_port(ds, port))
+ return 0;
+
+ err = felix_tag_8021q_vlan_add_rx(ocelot_to_felix(ocelot), port, vid);
+ if (err)
+ return err;
+
+ err = felix_tag_8021q_vlan_add_tx(ocelot_to_felix(ocelot), port, vid);
+ if (err) {
+ felix_tag_8021q_vlan_del_rx(ocelot_to_felix(ocelot), port, vid);
+ return err;
+ }
+
+ return 0;
+}
+
static int felix_tag_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid)
{
struct ocelot *ocelot = ds->priv;
+ int err;
+
+ if (!dsa_is_user_port(ds, port))
+ return 0;
- if (vid_is_dsa_8021q_rxvlan(vid))
- return felix_tag_8021q_rxvlan_del(ocelot_to_felix(ocelot),
- port, vid);
+ err = felix_tag_8021q_vlan_del_rx(ocelot_to_felix(ocelot), port, vid);
+ if (err)
+ return err;
- if (vid_is_dsa_8021q_txvlan(vid))
- return felix_tag_8021q_txvlan_del(ocelot_to_felix(ocelot),
- port, vid);
+ err = felix_tag_8021q_vlan_del_tx(ocelot_to_felix(ocelot), port, vid);
+ if (err) {
+ felix_tag_8021q_vlan_add_rx(ocelot_to_felix(ocelot), port, vid);
+ return err;
+ }
return 0;
}
*
* | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
* +-----------+-----+-----------------+-----------+-----------------------+
- * | DIR | VBID| SWITCH_ID | VBID | PORT |
+ * | RSV | VBID| SWITCH_ID | VBID | PORT |
* +-----------+-----+-----------------+-----------+-----------------------+
*
- * DIR - VID[11:10]:
- * Direction flags.
- * * 1 (0b01) for RX VLAN,
- * * 2 (0b10) for TX VLAN.
- * These values make the special VIDs of 0, 1 and 4095 to be left
- * unused by this coding scheme.
+ * RSV - VID[11:10]:
+ * Reserved. Must be set to 3 (0b11).
*
* SWITCH_ID - VID[8:6]:
* Index of switch within DSA tree. Must be between 0 and 7.
* Index of switch port. Must be between 0 and 15.
*/
-#define DSA_8021Q_DIR_SHIFT 10
-#define DSA_8021Q_DIR_MASK GENMASK(11, 10)
-#define DSA_8021Q_DIR(x) (((x) << DSA_8021Q_DIR_SHIFT) & \
- DSA_8021Q_DIR_MASK)
-#define DSA_8021Q_DIR_RX DSA_8021Q_DIR(1)
-#define DSA_8021Q_DIR_TX DSA_8021Q_DIR(2)
+#define DSA_8021Q_RSV_VAL 3
+#define DSA_8021Q_RSV_SHIFT 10
+#define DSA_8021Q_RSV_MASK GENMASK(11, 10)
+#define DSA_8021Q_RSV ((DSA_8021Q_RSV_VAL << DSA_8021Q_RSV_SHIFT) & \
+ DSA_8021Q_RSV_MASK)
#define DSA_8021Q_SWITCH_ID_SHIFT 6
#define DSA_8021Q_SWITCH_ID_MASK GENMASK(8, 6)
/* The VBID value of 0 is reserved for precise TX, but it is also
* reserved/invalid for the bridge_num, so all is well.
*/
- return DSA_8021Q_DIR_TX | DSA_8021Q_VBID(bridge_num);
+ return DSA_8021Q_RSV | DSA_8021Q_VBID(bridge_num);
}
EXPORT_SYMBOL_GPL(dsa_8021q_bridge_tx_fwd_offload_vid);
-/* Returns the VID to be inserted into the frame from xmit for switch steering
- * instructions on egress. Encodes switch ID and port ID.
- */
-u16 dsa_tag_8021q_tx_vid(const struct dsa_port *dp)
-{
- return DSA_8021Q_DIR_TX | DSA_8021Q_SWITCH_ID(dp->ds->index) |
- DSA_8021Q_PORT(dp->index);
-}
-EXPORT_SYMBOL_GPL(dsa_tag_8021q_tx_vid);
-
/* Returns the VID that will be installed as pvid for this switch port, sent as
* tagged egress towards the CPU port and decoded by the rcv function.
*/
-u16 dsa_tag_8021q_rx_vid(const struct dsa_port *dp)
+u16 dsa_tag_8021q_standalone_vid(const struct dsa_port *dp)
{
- return DSA_8021Q_DIR_RX | DSA_8021Q_SWITCH_ID(dp->ds->index) |
+ return DSA_8021Q_RSV | DSA_8021Q_SWITCH_ID(dp->ds->index) |
DSA_8021Q_PORT(dp->index);
}
-EXPORT_SYMBOL_GPL(dsa_tag_8021q_rx_vid);
+EXPORT_SYMBOL_GPL(dsa_tag_8021q_standalone_vid);
/* Returns the decoded switch ID from the RX VID. */
int dsa_8021q_rx_switch_id(u16 vid)
return (vbid_hi << 2) | vbid_lo;
}
-bool vid_is_dsa_8021q_rxvlan(u16 vid)
-{
- return (vid & DSA_8021Q_DIR_MASK) == DSA_8021Q_DIR_RX;
-}
-EXPORT_SYMBOL_GPL(vid_is_dsa_8021q_rxvlan);
-
-bool vid_is_dsa_8021q_txvlan(u16 vid)
-{
- return (vid & DSA_8021Q_DIR_MASK) == DSA_8021Q_DIR_TX;
-}
-EXPORT_SYMBOL_GPL(vid_is_dsa_8021q_txvlan);
-
bool vid_is_dsa_8021q(u16 vid)
{
- return vid_is_dsa_8021q_rxvlan(vid) || vid_is_dsa_8021q_txvlan(vid);
+ u16 rsv = (vid & DSA_8021Q_RSV_MASK) >> DSA_8021Q_RSV_SHIFT;
+
+ return rsv == DSA_8021Q_RSV_VAL;
}
EXPORT_SYMBOL_GPL(vid_is_dsa_8021q);
u16 flags = 0;
if (dsa_port_is_user(dp))
- flags |= BRIDGE_VLAN_INFO_UNTAGGED;
-
- /* Standalone VLANs are PVIDs */
- if (vid_is_dsa_8021q_rxvlan(info->vid) &&
- dsa_8021q_rx_switch_id(info->vid) == ds->index &&
- dsa_8021q_rx_source_port(info->vid) == dp->index)
- flags |= BRIDGE_VLAN_INFO_PVID;
-
- /* And bridging VLANs are PVIDs too on user ports */
- if (dsa_tag_8021q_rx_vbid(info->vid) &&
- dsa_port_is_user(dp))
- flags |= BRIDGE_VLAN_INFO_PVID;
+ flags |= BRIDGE_VLAN_INFO_UNTAGGED |
+ BRIDGE_VLAN_INFO_PVID;
err = dsa_port_do_tag_8021q_vlan_add(dp, info->vid,
flags);
return 0;
}
-/* RX VLAN tagging (left) and TX VLAN tagging (right) setup shown for a single
- * front-panel switch port (here swp0).
+/* There are 2 ways of offloading tag_8021q VLANs.
*
- * Port identification through VLAN (802.1Q) tags has different requirements
- * for it to work effectively:
- * - On RX (ingress from network): each front-panel port must have a pvid
- * that uniquely identifies it, and the egress of this pvid must be tagged
- * towards the CPU port, so that software can recover the source port based
- * on the VID in the frame. But this would only work for standalone ports;
- * if bridged, this VLAN setup would break autonomous forwarding and would
- * force all switched traffic to pass through the CPU. So we must also make
- * the other front-panel ports members of this VID we're adding, albeit
- * we're not making it their PVID (they'll still have their own).
- * - On TX (ingress from CPU and towards network) we are faced with a problem.
- * If we were to tag traffic (from within DSA) with the port's pvid, all
- * would be well, assuming the switch ports were standalone. Frames would
- * have no choice but to be directed towards the correct front-panel port.
- * But because we also want the RX VLAN to not break bridging, then
- * inevitably that means that we have to give them a choice (of what
- * front-panel port to go out on), and therefore we cannot steer traffic
- * based on the RX VID. So what we do is simply install one more VID on the
- * front-panel and CPU ports, and profit off of the fact that steering will
- * work just by virtue of the fact that there is only one other port that's
- * a member of the VID we're tagging the traffic with - the desired one.
+ * One is to use a hardware TCAM to push the port's standalone VLAN into the
+ * frame when forwarding it to the CPU, as an egress modification rule on the
+ * CPU port. This is preferable because it has no side effects for the
+ * autonomous forwarding path, and accomplishes tag_8021q's primary goal of
+ * identifying the source port of each packet based on VLAN ID.
*
- * So at the end, each front-panel port will have one RX VID (also the PVID),
- * the RX VID of all other front-panel ports that are in the same bridge, and
- * one TX VID. Whereas the CPU port will have the RX and TX VIDs of all
- * front-panel ports, and on top of that, is also tagged-input and
- * tagged-output (VLAN trunk).
+ * The other is to commit the tag_8021q VLAN as a PVID to the VLAN table, and
+ * to configure the port as VLAN-unaware. This is less preferable because
+ * unique source port identification can only be done for standalone ports;
+ * under a VLAN-unaware bridge, all ports share the same tag_8021q VLAN as
+ * PVID, and under a VLAN-aware bridge, packets received by software will not
+ * have tag_8021q VLANs appended, just bridge VLANs.
*
- * CPU port CPU port
- * +-------------+-----+-------------+ +-------------+-----+-------------+
- * | RX VID | | | | TX VID | | |
- * | of swp0 | | | | of swp0 | | |
- * | +-----+ | | +-----+ |
- * | ^ T | | | Tagged |
- * | | | | | ingress |
- * | +-------+---+---+-------+ | | +-----------+ |
- * | | | | | | | | Untagged |
- * | | U v U v U v | | v egress |
- * | +-----+ +-----+ +-----+ +-----+ | | +-----+ +-----+ +-----+ +-----+ |
- * | | | | | | | | | | | | | | | | | | | |
- * | |PVID | | | | | | | | | | | | | | | | | |
- * +-+-----+-+-----+-+-----+-+-----+-+ +-+-----+-+-----+-+-----+-+-----+-+
- * swp0 swp1 swp2 swp3 swp0 swp1 swp2 swp3
+ * For tag_8021q implementations of the second type, this method is used to
+ * replace the standalone tag_8021q VLAN of a port with the tag_8021q VLAN to
+ * be used for VLAN-unaware bridging.
*/
int dsa_tag_8021q_bridge_join(struct dsa_switch *ds, int port,
struct dsa_bridge bridge)
/* Delete the standalone VLAN of the port and replace it with a
* bridging VLAN
*/
- standalone_vid = dsa_tag_8021q_rx_vid(dp);
+ standalone_vid = dsa_tag_8021q_standalone_vid(dp);
bridge_vid = dsa_8021q_bridge_tx_fwd_offload_vid(bridge.num);
err = dsa_port_tag_8021q_vlan_add(dp, bridge_vid, true);
/* Delete the bridging VLAN of the port and replace it with a
* standalone VLAN
*/
- standalone_vid = dsa_tag_8021q_rx_vid(dp);
+ standalone_vid = dsa_tag_8021q_standalone_vid(dp);
bridge_vid = dsa_8021q_bridge_tx_fwd_offload_vid(bridge.num);
err = dsa_port_tag_8021q_vlan_add(dp, standalone_vid, false);
}
EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_leave);
-/* Set up a port's tag_8021q RX and TX VLAN for standalone mode operation */
+/* Set up a port's standalone tag_8021q VLAN */
static int dsa_tag_8021q_port_setup(struct dsa_switch *ds, int port)
{
struct dsa_8021q_context *ctx = ds->tag_8021q_ctx;
struct dsa_port *dp = dsa_to_port(ds, port);
- u16 rx_vid = dsa_tag_8021q_rx_vid(dp);
- u16 tx_vid = dsa_tag_8021q_tx_vid(dp);
+ u16 vid = dsa_tag_8021q_standalone_vid(dp);
struct net_device *master;
int err;
master = dp->cpu_dp->master;
- /* Add this user port's RX VID to the membership list of all others
- * (including itself). This is so that bridging will not be hindered.
- * L2 forwarding rules still take precedence when there are no VLAN
- * restrictions, so there are no concerns about leaking traffic.
- */
- err = dsa_port_tag_8021q_vlan_add(dp, rx_vid, false);
+ err = dsa_port_tag_8021q_vlan_add(dp, vid, false);
if (err) {
dev_err(ds->dev,
- "Failed to apply RX VID %d to port %d: %pe\n",
- rx_vid, port, ERR_PTR(err));
+ "Failed to apply standalone VID %d to port %d: %pe\n",
+ vid, port, ERR_PTR(err));
return err;
}
- /* Add @rx_vid to the master's RX filter. */
- vlan_vid_add(master, ctx->proto, rx_vid);
-
- /* Finally apply the TX VID on this port and on the CPU port */
- err = dsa_port_tag_8021q_vlan_add(dp, tx_vid, false);
- if (err) {
- dev_err(ds->dev,
- "Failed to apply TX VID %d on port %d: %pe\n",
- tx_vid, port, ERR_PTR(err));
- return err;
- }
+ /* Add the VLAN to the master's RX filter. */
+ vlan_vid_add(master, ctx->proto, vid);
return err;
}
{
struct dsa_8021q_context *ctx = ds->tag_8021q_ctx;
struct dsa_port *dp = dsa_to_port(ds, port);
- u16 rx_vid = dsa_tag_8021q_rx_vid(dp);
- u16 tx_vid = dsa_tag_8021q_tx_vid(dp);
+ u16 vid = dsa_tag_8021q_standalone_vid(dp);
struct net_device *master;
/* The CPU port is implicitly configured by
master = dp->cpu_dp->master;
- dsa_port_tag_8021q_vlan_del(dp, rx_vid, false);
-
- vlan_vid_del(master, ctx->proto, rx_vid);
+ dsa_port_tag_8021q_vlan_del(dp, vid, false);
- dsa_port_tag_8021q_vlan_del(dp, tx_vid, false);
+ vlan_vid_del(master, ctx->proto, vid);
}
static int dsa_tag_8021q_setup(struct dsa_switch *ds)
projects / users / jedix / linux-maple.git / commitdiff