PCI Hotplug: cpqphp: eliminate stray braces

Clean up style and eliminate superfluous braces and parens.

No functional change.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index f05ea7a5606b8232cf40142abf204f9dfaf151dc..195c8c9b33e0067d65c47b304db132e8f2889948 100644 (file)
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -154,7 +154,6 @@ static int init_SERR(struct controller * ctrl)
        return 0;
 }
 
-
 /* nice debugging output */
 static int pci_print_IRQ_route (void)
 {
@@ -214,7 +213,7 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
        void __iomem *p_max;
 
        if (!smbios_table || !curr)
-               return(NULL);
+               return NULL;
 
        /* set p_max to the end of the table */
        p_max = smbios_start + readw(smbios_table + ST_LENGTH);
@@ -227,19 +226,17 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
                 * The first condition is the previous byte
                 * and the second is the curr
                 */
-               if (!previous_byte && !(readb(p_temp))) {
+               if (!previous_byte && !(readb(p_temp)))
                        bail = 1;
-               }
 
                previous_byte = readb(p_temp);
                p_temp++;
        }
 
-       if (p_temp < p_max) {
+       if (p_temp < p_max)
                return p_temp;
-       } else {
+       else
                return NULL;
-       }
 }
 
 
@@ -265,21 +262,18 @@ static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start,
        if (!smbios_table)
                return NULL;
 
-       if (!previous) {
+       if (!previous)
                previous = smbios_start;
-       } else {
+       else
                previous = get_subsequent_smbios_entry(smbios_start,
                                        smbios_table, previous);
-       }
 
-       while (previous) {
-               if (readb(previous + SMBIOS_GENERIC_TYPE) != type) {
+       while (previous)
+               if (readb(previous + SMBIOS_GENERIC_TYPE) != type)
                        previous = get_subsequent_smbios_entry(smbios_start,
                                                smbios_table, previous);
-               } else {
+               else
                        break;
-               }
-       }
 
        return previous;
 }
@@ -319,7 +313,7 @@ static int ctrl_slot_cleanup (struct controller * ctrl)
        release_mem_region(pci_resource_start(ctrl->pci_dev, 0),
                           pci_resource_len(ctrl->pci_dev, 0));
 
-       return(0);
+       return 0;
 }
 
 
@@ -388,9 +382,8 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
                                                        PCI_DEVFN(tdevice, 0),
                                                        PCI_PRIMARY_BUS, &work);
                                // See if bridge's secondary bus matches target bus.
-                               if (((work >> 8) & 0x000000FF) == (long) bus_num) {
+                               if (((work >> 8) & 0x000000FF) == (long) bus_num)
                                        bridgeSlot = tslot;
-                               }
                        }
                }
 
@@ -425,21 +418,21 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
        u8 hp_slot;
 
        if (func == NULL)
-               return(1);
+               return 1;
 
        hp_slot = func->device - ctrl->slot_device_offset;
 
        /* Wait for exclusive access to hardware */
        mutex_lock(&ctrl->crit_sect);
 
-       if (status == 1) {
+       if (status == 1)
                amber_LED_on (ctrl, hp_slot);
-       } else if (status == 0) {
+       else if (status == 0)
                amber_LED_off (ctrl, hp_slot);
-       } else {
+       else {
                /* Done with exclusive hardware access */
                mutex_unlock(&ctrl->crit_sect);
-               return(1);
+               return 1;
        }
 
        set_SOGO(ctrl);
@@ -450,7 +443,7 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
        /* Done with exclusive hardware access */
        mutex_unlock(&ctrl->crit_sect);
 
-       return(0);
+       return 0;
 }
 
 
@@ -678,8 +671,7 @@ static int ctrl_slot_setup(struct controller *ctrl,
                        goto error_slot;
                hotplug_slot = slot->hotplug_slot;
 
-               hotplug_slot->info =
-                               kzalloc(sizeof(*(hotplug_slot->info)),
+               hotplug_slot->info = kzalloc(sizeof(*(hotplug_slot->info)),
                                                        GFP_KERNEL);
                if (!hotplug_slot->info)
                        goto error_hpslot;
@@ -801,9 +793,8 @@ static int one_time_init(void)
                goto error;
 
        dbg("Initialize slot lists\n");
-       for (loop = 0; loop < 256; loop++) {
+       for (loop = 0; loop < 256; loop++)
                cpqhp_slot_list[loop] = NULL;
-       }
 
        /* FIXME: We also need to hook the NMI handler eventually.
         * this also needs to be worked with Christoph
@@ -1306,18 +1297,16 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
                func->presence_save = (temp_word >> hp_slot) & 0x01;
                func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
 
-               if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
+               if (ctrl->ctrl_int_comp & (0x1L << hp_slot))
                        func->switch_save = 0;
-               } else {
+               else
                        func->switch_save = 0x10;
-               }
 
-               if (!power_mode) {
+               if (!power_mode)
                        if (!func->is_a_board) {
                                green_LED_off(ctrl, hp_slot);
                                slot_disable(ctrl, hp_slot);
                        }
-               }
 
                device++;
                num_of_slots--;