--- /dev/null
+C6X PLL Clock Controllers
+-------------------------
+
+This is a first-cut support for the SoC clock controllers. This is still
+under development and will probably change as the common device tree
+clock support is added to the kernel.
+
+Required properties:
+
+- compatible: "ti,c64x+pll"
+ May also have SoC-specific value to support SoC-specific initialization
+ in the driver. One of:
+ "ti,c6455-pll"
+ "ti,c6457-pll"
+ "ti,c6472-pll"
+ "ti,c6474-pll"
+
+- reg: base address and size of register area
+- clock-frequency: input clock frequency in hz
+
+
+Optional properties:
+
+- ti,c64x+pll-bypass-delay: CPU cycles to delay when entering bypass mode
+
+- ti,c64x+pll-reset-delay: CPU cycles to delay after PLL reset
+
+- ti,c64x+pll-lock-delay: CPU cycles to delay after PLL frequency change
+
+Example:
+
+ clock-controller@29a0000 {
+ compatible = "ti,c6472-pll", "ti,c64x+pll";
+ reg = <0x029a0000 0x200>;
+ clock-frequency = <25000000>;
+
+ ti,c64x+pll-bypass-delay = <200>;
+ ti,c64x+pll-reset-delay = <12000>;
+ ti,c64x+pll-lock-delay = <80000>;
+ };
--- /dev/null
+Device State Configuration Registers
+------------------------------------
+
+TI C6X SoCs contain a region of miscellaneous registers which provide various
+function for SoC control or status. Details vary considerably among from SoC
+to SoC with no two being alike.
+
+In general, the Device State Configuraion Registers (DSCR) will provide one or
+more configuration registers often protected by a lock register where one or
+more key values must be written to a lock register in order to unlock the
+configuration register for writes. These configuration register may be used to
+enable (and disable in some cases) SoC pin drivers, select peripheral clock
+sources (internal or pin), etc. In some cases, a configuration register is
+write once or the individual bits are write once. In addition to device config,
+the DSCR block may provide registers which which are used to reset peripherals,
+provide device ID information, provide ethernet MAC addresses, as well as other
+miscellaneous functions.
+
+For device state control (enable/disable), each device control is assigned an
+id which is used by individual device drivers to control the state as needed.
+
+Required properties:
+
+- compatible: must be "ti,c64x+dscr"
+- reg: register area base and size
+
+Optional properties:
+
+ NOTE: These are optional in that not all SoCs will have all properties. For
+ SoCs which do support a given property, leaving the property out of the
+ device tree will result in reduced functionality or possibly driver
+ failure.
+
+- ti,dscr-devstat
+ offset of the devstat register
+
+- ti,dscr-silicon-rev
+ offset, start bit, and bitsize of silicon revision field
+
+- ti,dscr-rmii-resets
+ offset and bitmask of RMII reset field. May have multiple tuples if more
+ than one ethernet port is available.
+
+- ti,dscr-locked-regs
+ possibly multiple tuples describing registers which are write protected by
+ a lock register. Each tuple consists of the register offset, lock register
+ offsset, and the key value used to unlock the register.
+
+- ti,dscr-kick-regs
+ offset and key values of two "kick" registers used to write protect other
+ registers in DSCR. On SoCs using kick registers, the first key must be
+ written to the first kick register and the second key must be written to
+ the second register before other registers in the area are write-enabled.
+
+- ti,dscr-mac-fuse-regs
+ MAC addresses are contained in two registers. Each element of a MAC address
+ is contained in a single byte. This property has two tuples. Each tuple has
+ a register offset and four cells representing bytes in the register from
+ most significant to least. The value of these four cells is the MAC byte
+ index (1-6) of the byte within the register. A value of 0 means the byte
+ is unused in the MAC address.
+
+- ti,dscr-devstate-ctl-regs
+ This property describes the bitfields used to control the state of devices.
+ Each tuple describes a range of identical bitfields used to control one or
+ more devices (one bitfield per device). The layout of each tuple is:
+
+ start_id num_ids reg enable disable start_bit nbits
+
+ Where:
+ start_id is device id for the first device control in the range
+ num_ids is the number of device controls in the range
+ reg is the offset of the register holding the control bits
+ enable is the value to enable a device
+ disable is the value to disable a device (0xffffffff if cannot disable)
+ start_bit is the bit number of the first bit in the range
+ nbits is the number of bits per device control
+
+- ti,dscr-devstate-stat-regs
+ This property describes the bitfields used to provide device state status
+ for device states controlled by the DSCR. Each tuple describes a range of
+ identical bitfields used to provide status for one or more devices (one
+ bitfield per device). The layout of each tuple is:
+
+ start_id num_ids reg enable disable start_bit nbits
+
+ Where:
+ start_id is device id for the first device status in the range
+ num_ids is the number of devices covered by the range
+ reg is the offset of the register holding the status bits
+ enable is the value indicating device is enabled
+ disable is the value indicating device is disabled
+ start_bit is the bit number of the first bit in the range
+ nbits is the number of bits per device status
+
+- ti,dscr-privperm
+ Offset and default value for register used to set access privilege for
+ some SoC devices.
+
+
+Example:
+
+ device-state-config-regs@2a80000 {
+ compatible = "ti,c64x+dscr";
+ reg = <0x02a80000 0x41000>;
+
+ ti,dscr-devstat = <0>;
+ ti,dscr-silicon-rev = <8 28 0xf>;
+ ti,dscr-rmii-resets = <0x40020 0x00040000>;
+
+ ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>;
+ ti,dscr-devstate-ctl-regs =
+ <0 12 0x40008 1 0 0 2
+ 12 1 0x40008 3 0 30 2
+ 13 2 0x4002c 1 0xffffffff 0 1>;
+ ti,dscr-devstate-stat-regs =
+ <0 10 0x40014 1 0 0 3
+ 10 2 0x40018 1 0 0 3>;
+
+ ti,dscr-mac-fuse-regs = <0x700 1 2 3 4
+ 0x704 5 6 0 0>;
+
+ ti,dscr-privperm = <0x41c 0xaaaaaaaa>;
+
+ ti,dscr-kick-regs = <0x38 0x83E70B13
+ 0x3c 0x95A4F1E0>;
+ };
--- /dev/null
+External Memory Interface
+-------------------------
+
+The emifa node describes a simple external bus controller found on some C6X
+SoCs. This interface provides external busses with a number of chip selects.
+
+Required properties:
+
+- compatible: must be "ti,c64x+emifa", "simple-bus"
+- reg: register area base and size
+- #address-cells: must be 2 (chip-select + offset)
+- #size-cells: must be 1
+- ranges: mapping from EMIFA space to parent space
+
+
+Optional properties:
+
+- ti,dscr-dev-enable: Device ID if EMIF is enabled/disabled from DSCR
+
+- ti,emifa-burst-priority:
+ Number of memory transfers after which the EMIF will elevate the priority
+ of the oldest command in the command FIFO. Setting this field to 255
+ disables this feature, thereby allowing old commands to stay in the FIFO
+ indefinitely.
+
+- ti,emifa-ce-config:
+ Configuration values for each of the supported chip selects.
+
+Example:
+
+ emifa@70000000 {
+ compatible = "ti,c64x+emifa", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x100>;
+ ranges = <0x2 0x0 0xa0000000 0x00000008
+ 0x3 0x0 0xb0000000 0x00400000
+ 0x4 0x0 0xc0000000 0x10000000
+ 0x5 0x0 0xD0000000 0x10000000>;
+
+ ti,dscr-dev-enable = <13>;
+ ti,emifa-burst-priority = <255>;
+ ti,emifa-ce-config = <0x00240120
+ 0x00240120
+ 0x00240122
+ 0x00240122>;
+
+ flash@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x3 0x0 0x400000>;
+ bank-width = <1>;
+ device-width = <1>;
+ partition@0 {
+ reg = <0x0 0x400000>;
+ label = "NOR";
+ };
+ };
+ };
+
+This shows a flash chip attached to chip select 3.
--- /dev/null
+C6X Interrupt Chips
+-------------------
+
+* C64X+ Core Interrupt Controller
+
+ The core interrupt controller provides 16 prioritized interrupts to the
+ C64X+ core. Priority 0 and 1 are used for reset and NMI respectively.
+ Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt
+ sources coming from outside the core.
+
+ Required properties:
+ --------------------
+ - compatible: Should be "ti,c64x+core-pic";
+ - #interrupt-cells: <1>
+
+ Interrupt Specifier Definition
+ ------------------------------
+ Single cell specifying the core interrupt priority level (4-15) where
+ 4 is highest priority and 15 is lowest priority.
+
+ Example
+ -------
+ core_pic: interrupt-controller@0 {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ compatible = "ti,c64x+core-pic";
+ };
+
+
+
+* C64x+ Megamodule Interrupt Controller
+
+ The megamodule PIC consists of four interrupt mupliplexers each of which
+ combine up to 32 interrupt inputs into a single interrupt output which
+ may be cascaded into the core interrupt controller. The megamodule PIC
+ has a total of 12 outputs cascading into the core interrupt controller.
+ One for each core interrupt priority level. In addition to the combined
+ interrupt sources, individual megamodule interrupts may be cascaded to
+ the core interrupt controller. When an individual interrupt is cascaded,
+ it is no longer handled through a megamodule interrupt combiner and is
+ considered to have the core interrupt controller as the parent.
+
+ Required properties:
+ --------------------
+ - compatible: "ti,c64x+megamod-pic"
+ - interrupt-controller
+ - #interrupt-cells: <1>
+ - reg: base address and size of register area
+ - interrupt-parent: must be core interrupt controller
+ - interrupts: This should have four cells; one for each interrupt combiner.
+ The cells contain the core priority interrupt to which the
+ corresponding combiner output is wired.
+
+ Optional properties:
+ --------------------
+ - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core
+ priority interrupts. The first cell corresponds to
+ core priority 4 and the last cell corresponds to
+ core priority 15. The value of each cell is the
+ megamodule interrupt source which is MUXed to
+ the core interrupt corresponding to the cell
+ position. Allowed values are 4 - 127. Mapping for
+ interrupts 0 - 3 (combined interrupt sources) are
+ ignored.
+
+ Interrupt Specifier Definition
+ ------------------------------
+ Single cell specifying the megamodule interrupt source (4-127). Note that
+ interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will
+ use the core interrupt controller as their parent and the specifier will
+ be the core priority level, not the megamodule interrupt number.
+
+ Examples
+ --------
+ megamod_pic: interrupt-controller@1800000 {
+ compatible = "ti,c64x+megamod-pic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x1800000 0x1000>;
+ interrupt-parent = <&core_pic>;
+ interrupts = < 12 13 14 15 >;
+ };
+
+ This is a minimal example where all individual interrupts go through a
+ combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped
+ to interrupt 13, etc.
+
+
+ megamod_pic: interrupt-controller@1800000 {
+ compatible = "ti,c64x+megamod-pic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x1800000 0x1000>;
+ interrupt-parent = <&core_pic>;
+ interrupts = < 12 13 14 15 >;
+ ti,c64x+megamod-pic-mux = < 0 0 0 0
+ 32 0 0 0
+ 0 0 0 0 >;
+ };
+
+ This the same as the first example except that megamodule interrupt 32 is
+ mapped directly to core priority interrupt 8. The node using this interrupt
+ must set the core controller as its interrupt parent and use 8 in the
+ interrupt specifier value.
--- /dev/null
+C6X System-on-Chip
+------------------
+
+Required properties:
+
+- compatible: "simple-bus"
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges
+
+Optional properties:
+
+- model: specific SoC model
+
+- nodes for IP blocks within SoC
+
+
+Example:
+
+ soc {
+ compatible = "simple-bus";
+ model = "tms320c6455";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ...
+ };
--- /dev/null
+Timer64
+-------
+
+The timer64 node describes C6X event timers.
+
+Required properties:
+
+- compatible: must be "ti,c64x+timer64"
+- reg: base address and size of register region
+- interrupt-parent: interrupt controller
+- interrupts: interrupt id
+
+Optional properties:
+
+- ti,dscr-dev-enable: Device ID used to enable timer IP through DSCR interface.
+
+- ti,core-mask: on multi-core SoCs, bitmask of cores allowed to use this timer.
+
+Example:
+ timer0: timer@25e0000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x01 >;
+ reg = <0x25e0000 0x40>;
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 16 >;
+ };
--- /dev/null
+/*
+ * arch/c6x/boot/dts/dsk6455.dts
+ *
+ * DSK6455 Evaluation Platform For TMS320C6455
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ *
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "tms320c6455.dtsi"
+
+/ {
+ model = "Spectrum Digital DSK6455";
+ compatible = "spectrum-digital,dsk6455";
+
+ chosen {
+ bootargs = "root=/dev/nfs ip=dhcp rw";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0xE0000000 0x08000000>;
+ };
+
+ soc {
+ megamod_pic: interrupt-controller@1800000 {
+ interrupts = < 12 13 14 15 >;
+ };
+
+ emifa@70000000 {
+ flash@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x3 0x0 0x400000>;
+ bank-width = <1>;
+ device-width = <1>;
+ partition@0 {
+ reg = <0x0 0x400000>;
+ label = "NOR";
+ };
+ };
+ };
+
+ timer1: timer@2980000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 69 >;
+ };
+
+ clock-controller@029a0000 {
+ clock-frequency = <50000000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * arch/c6x/boot/dts/evmc6457.dts
+ *
+ * EVMC6457 Evaluation Platform For TMS320C6457
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ *
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "tms320c6457.dtsi"
+
+/ {
+ model = "eInfochips EVMC6457";
+ compatible = "einfochips,evmc6457";
+
+ chosen {
+ bootargs = "console=hvc root=/dev/nfs ip=dhcp rw";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0xE0000000 0x10000000>;
+ };
+
+ soc {
+ megamod_pic: interrupt-controller@1800000 {
+ interrupts = < 12 13 14 15 >;
+ };
+
+ timer0: timer@2940000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 67 >;
+ };
+
+ clock-controller@29a0000 {
+ clock-frequency = <60000000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * arch/c6x/boot/dts/evmc6472.dts
+ *
+ * EVMC6472 Evaluation Platform For TMS320C6472
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ *
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "tms320c6472.dtsi"
+
+/ {
+ model = "eInfochips EVMC6472";
+ compatible = "einfochips,evmc6472";
+
+ chosen {
+ bootargs = "console=hvc root=/dev/nfs ip=dhcp rw";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0xE0000000 0x10000000>;
+ };
+
+ soc {
+ megamod_pic: interrupt-controller@1800000 {
+ interrupts = < 12 13 14 15 >;
+ };
+
+ timer0: timer@25e0000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 16 >;
+ };
+
+ timer1: timer@25f0000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 16 >;
+ };
+
+ timer2: timer@2600000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 16 >;
+ };
+
+ timer3: timer@2610000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 16 >;
+ };
+
+ timer4: timer@2620000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 16 >;
+ };
+
+ timer5: timer@2630000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 16 >;
+ };
+
+ clock-controller@29a0000 {
+ clock-frequency = <25000000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * arch/c6x/boot/dts/evmc6474.dts
+ *
+ * EVMC6474 Evaluation Platform For TMS320C6474
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ *
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "tms320c6474.dtsi"
+
+/ {
+ model = "Spectrum Digital EVMC6474";
+ compatible = "spectrum-digital,evmc6474";
+
+ chosen {
+ bootargs = "console=hvc root=/dev/nfs ip=dhcp rw";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x08000000>;
+ };
+
+ soc {
+ megamod_pic: interrupt-controller@1800000 {
+ interrupts = < 12 13 14 15 >;
+ };
+
+ timer3: timer@2940000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 39 >;
+ };
+
+ timer4: timer@2950000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 41 >;
+ };
+
+ timer5: timer@2960000 {
+ interrupt-parent = <&megamod_pic>;
+ interrupts = < 43 >;
+ };
+
+ clock-controller@29a0000 {
+ clock-frequency = <50000000>;
+ };
+ };
+};
--- /dev/null
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "ti,c64x+";
+ reg = <0>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ model = "tms320c6455";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ core_pic: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ compatible = "ti,c64x+core-pic";
+ };
+
+ /*
+ * Megamodule interrupt controller
+ */
+ megamod_pic: interrupt-controller@1800000 {
+ compatible = "ti,c64x+megamod-pic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x1800000 0x1000>;
+ interrupt-parent = <&core_pic>;
+ };
+
+ cache-controller@1840000 {
+ compatible = "ti,c64x+cache";
+ reg = <0x01840000 0x8400>;
+ };
+
+ emifa@70000000 {
+ compatible = "ti,c64x+emifa", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x100>;
+ ranges = <0x2 0x0 0xa0000000 0x00000008
+ 0x3 0x0 0xb0000000 0x00400000
+ 0x4 0x0 0xc0000000 0x10000000
+ 0x5 0x0 0xD0000000 0x10000000>;
+
+ ti,dscr-dev-enable = <13>;
+ ti,emifa-burst-priority = <255>;
+ ti,emifa-ce-config = <0x00240120
+ 0x00240120
+ 0x00240122
+ 0x00240122>;
+ };
+
+ timer1: timer@2980000 {
+ compatible = "ti,c64x+timer64";
+ reg = <0x2980000 0x40>;
+ ti,dscr-dev-enable = <4>;
+ };
+
+ clock-controller@029a0000 {
+ compatible = "ti,c6455-pll", "ti,c64x+pll";
+ reg = <0x029a0000 0x200>;
+ ti,c64x+pll-bypass-delay = <1440>;
+ ti,c64x+pll-reset-delay = <15360>;
+ ti,c64x+pll-lock-delay = <24000>;
+ };
+
+ device-state-config-regs@2a80000 {
+ compatible = "ti,c64x+dscr";
+ reg = <0x02a80000 0x41000>;
+
+ ti,dscr-devstat = <0>;
+ ti,dscr-silicon-rev = <8 28 0xf>;
+ ti,dscr-rmii-resets = <0 0x40020 0x00040000>;
+
+ ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>;
+ ti,dscr-devstate-ctl-regs =
+ <0 12 0x40008 1 0 0 2
+ 12 1 0x40008 3 0 30 2
+ 13 2 0x4002c 1 0xffffffff 0 1>;
+ ti,dscr-devstate-stat-regs =
+ <0 10 0x40014 1 0 0 3
+ 10 2 0x40018 1 0 0 3>;
+ };
+ };
+};
--- /dev/null
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "ti,c64x+";
+ reg = <0>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ model = "tms320c6457";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ core_pic: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ compatible = "ti,c64x+core-pic";
+ };
+
+ megamod_pic: interrupt-controller@1800000 {
+ compatible = "ti,c64x+megamod-pic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&core_pic>;
+ reg = <0x1800000 0x1000>;
+ };
+
+ cache-controller@1840000 {
+ compatible = "ti,c64x+cache";
+ reg = <0x01840000 0x8400>;
+ };
+
+ device-state-controller@2880800 {
+ compatible = "ti,c64x+dscr";
+ reg = <0x02880800 0x400>;
+
+ ti,dscr-devstat = <0x20>;
+ ti,dscr-silicon-rev = <0x18 28 0xf>;
+ ti,dscr-mac-fuse-regs = <0x114 3 4 5 6
+ 0x118 0 0 1 2>;
+ ti,dscr-kick-regs = <0x38 0x83E70B13
+ 0x3c 0x95A4F1E0>;
+ };
+
+ timer0: timer@2940000 {
+ compatible = "ti,c64x+timer64";
+ reg = <0x2940000 0x40>;
+ };
+
+ clock-controller@29a0000 {
+ compatible = "ti,c6457-pll", "ti,c64x+pll";
+ reg = <0x029a0000 0x200>;
+ ti,c64x+pll-bypass-delay = <300>;
+ ti,c64x+pll-reset-delay = <24000>;
+ ti,c64x+pll-lock-delay = <50000>;
+ };
+ };
+};
--- /dev/null
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ model = "ti,c64x+";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ reg = <1>;
+ model = "ti,c64x+";
+ };
+ cpu@2 {
+ device_type = "cpu";
+ reg = <2>;
+ model = "ti,c64x+";
+ };
+ cpu@3 {
+ device_type = "cpu";
+ reg = <3>;
+ model = "ti,c64x+";
+ };
+ cpu@4 {
+ device_type = "cpu";
+ reg = <4>;
+ model = "ti,c64x+";
+ };
+ cpu@5 {
+ device_type = "cpu";
+ reg = <5>;
+ model = "ti,c64x+";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ model = "tms320c6472";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ core_pic: interrupt-controller {
+ compatible = "ti,c64x+core-pic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ megamod_pic: interrupt-controller@1800000 {
+ compatible = "ti,c64x+megamod-pic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x1800000 0x1000>;
+ interrupt-parent = <&core_pic>;
+ };
+
+ cache-controller@1840000 {
+ compatible = "ti,c64x+cache";
+ reg = <0x01840000 0x8400>;
+ };
+
+ timer0: timer@25e0000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x01 >;
+ reg = <0x25e0000 0x40>;
+ };
+
+ timer1: timer@25f0000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x02 >;
+ reg = <0x25f0000 0x40>;
+ };
+
+ timer2: timer@2600000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x04 >;
+ reg = <0x2600000 0x40>;
+ };
+
+ timer3: timer@2610000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x08 >;
+ reg = <0x2610000 0x40>;
+ };
+
+ timer4: timer@2620000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x10 >;
+ reg = <0x2620000 0x40>;
+ };
+
+ timer5: timer@2630000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x20 >;
+ reg = <0x2630000 0x40>;
+ };
+
+ clock-controller@29a0000 {
+ compatible = "ti,c6472-pll", "ti,c64x+pll";
+ reg = <0x029a0000 0x200>;
+ ti,c64x+pll-bypass-delay = <200>;
+ ti,c64x+pll-reset-delay = <12000>;
+ ti,c64x+pll-lock-delay = <80000>;
+ };
+
+ device-state-controller@2a80000 {
+ compatible = "ti,c64x+dscr";
+ reg = <0x02a80000 0x1000>;
+
+ ti,dscr-devstat = <0>;
+ ti,dscr-silicon-rev = <0x70c 16 0xff>;
+
+ ti,dscr-mac-fuse-regs = <0x700 1 2 3 4
+ 0x704 5 6 0 0>;
+
+ ti,dscr-rmii-resets = <0x208 1
+ 0x20c 1>;
+
+ ti,dscr-locked-regs = <0x200 0x204 0x0a1e183a
+ 0x40c 0x420 0xbea7
+ 0x41c 0x420 0xbea7>;
+
+ ti,dscr-privperm = <0x41c 0xaaaaaaaa>;
+
+ ti,dscr-devstate-ctl-regs = <0 13 0x200 1 0 0 1>;
+ };
+ };
+};
--- /dev/null
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ model = "ti,c64x+";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ reg = <1>;
+ model = "ti,c64x+";
+ };
+ cpu@2 {
+ device_type = "cpu";
+ reg = <2>;
+ model = "ti,c64x+";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ model = "tms320c6474";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ core_pic: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ compatible = "ti,c64x+core-pic";
+ };
+
+ megamod_pic: interrupt-controller@1800000 {
+ compatible = "ti,c64x+megamod-pic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x1800000 0x1000>;
+ interrupt-parent = <&core_pic>;
+ };
+
+ cache-controller@1840000 {
+ compatible = "ti,c64x+cache";
+ reg = <0x01840000 0x8400>;
+ };
+
+ timer3: timer@2940000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x04 >;
+ reg = <0x2940000 0x40>;
+ };
+
+ timer4: timer@2950000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x02 >;
+ reg = <0x2950000 0x40>;
+ };
+
+ timer5: timer@2960000 {
+ compatible = "ti,c64x+timer64";
+ ti,core-mask = < 0x01 >;
+ reg = <0x2960000 0x40>;
+ };
+
+ device-state-controller@2880800 {
+ compatible = "ti,c64x+dscr";
+ reg = <0x02880800 0x400>;
+
+ ti,dscr-devstat = <0x004>;
+ ti,dscr-silicon-rev = <0x014 28 0xf>;
+ ti,dscr-mac-fuse-regs = <0x34 3 4 5 6
+ 0x38 0 0 1 2>;
+ };
+
+ clock-controller@29a0000 {
+ compatible = "ti,c6474-pll", "ti,c64x+pll";
+ reg = <0x029a0000 0x200>;
+ ti,c64x+pll-bypass-delay = <120>;
+ ti,c64x+pll-reset-delay = <30000>;
+ ti,c64x+pll-lock-delay = <60000>;
+ };
+ };
+};
--- /dev/null
+.section __fdt_blob,"a"
+.incbin "arch/c6x/boot/builtin.dtb"
--- /dev/null
+/*
+ * Architecture specific OF callbacks.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/initrd.h>
+#include <linux/memblock.h>
+
+void __init early_init_devtree(void *params)
+{
+ /* Setup flat device-tree pointer */
+ initial_boot_params = params;
+
+ /* Retrieve various informations from the /chosen node of the
+ * device-tree, including the platform type, initrd location and
+ * size and more ...
+ */
+ of_scan_flat_dt(early_init_dt_scan_chosen, c6x_command_line);
+
+ /* Scan memory nodes and rebuild MEMBLOCKs */
+ of_scan_flat_dt(early_init_dt_scan_root, NULL);
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+}
+
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+ unsigned long end)
+{
+ initrd_start = (unsigned long)__va(start);
+ initrd_end = (unsigned long)__va(end);
+ initrd_below_start_ok = 1;
+}
+#endif
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+ c6x_add_memory(base, size);
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+ return __va(memblock_alloc(size, align));
+}
--- /dev/null
+/*
+ * Copyright 2011 Texas Instruments Incorporated
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static int __init c6x_device_probe(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ return 0;
+}
+core_initcall(c6x_device_probe);
projects / users / jedix / linux-maple.git / commitdiff