--- /dev/null
+/*
+ * linux/drivers/video/am200epd.c -- Platform device for AM200 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Lyre interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+
+#include <video/metronomefb.h>
+
+#include <asm/arch/pxa-regs.h>
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+
+#define AF_SEL_GPIO_N 0x3
+#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2)
+#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2)
+#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2)
+#define GPDR1_OFFSET(pin) (pin - 32)
+#define GPCR1_OFFSET(pin) (pin - 32)
+#define GPSR1_OFFSET(pin) (pin - 32)
+#define GPCR0_OFFSET(pin) (pin)
+#define GPSR0_OFFSET(pin) (pin)
+
+static void am200_set_gpio_output(int pin, int val)
+{
+ u8 index;
+
+ index = pin >> 4;
+
+ switch (index) {
+ case 1:
+ if (val)
+ GPSR0 |= (1 << GPSR0_OFFSET(pin));
+ else
+ GPCR0 |= (1 << GPCR0_OFFSET(pin));
+ break;
+ case 2:
+ break;
+ case 3:
+ if (val)
+ GPSR1 |= (1 << GPSR1_OFFSET(pin));
+ else
+ GPCR1 |= (1 << GPCR1_OFFSET(pin));
+ break;
+ default:
+ printk(KERN_ERR "unimplemented\n");
+ }
+}
+
+static void __devinit am200_init_gpio_pin(int pin, int dir)
+{
+ u8 index;
+ /* dir 0 is output, 1 is input
+ - do 2 things here:
+ - set gpio alternate function to standard gpio
+ - set gpio direction to input or output */
+
+ index = pin >> 4;
+ switch (index) {
+ case 1:
+ GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin));
+
+ if (dir)
+ GPDR0 &= ~(1 << pin);
+ else
+ GPDR0 |= (1 << pin);
+ break;
+ case 2:
+ GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin));
+
+ if (dir)
+ GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
+ else
+ GPDR1 |= (1 << GPDR1_OFFSET(pin));
+ break;
+ case 3:
+ GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin));
+
+ if (dir)
+ GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
+ else
+ GPDR1 |= (1 << GPDR1_OFFSET(pin));
+ break;
+ default:
+ printk(KERN_ERR "unimplemented\n");
+ }
+}
+
+static void am200_init_gpio_regs(struct metronomefb_par *par)
+{
+ am200_init_gpio_pin(LED_GPIO_PIN, 0);
+ am200_set_gpio_output(LED_GPIO_PIN, 0);
+
+ am200_init_gpio_pin(STDBY_GPIO_PIN, 0);
+ am200_set_gpio_output(STDBY_GPIO_PIN, 0);
+
+ am200_init_gpio_pin(RST_GPIO_PIN, 0);
+ am200_set_gpio_output(RST_GPIO_PIN, 0);
+
+ am200_init_gpio_pin(RDY_GPIO_PIN, 1);
+
+ am200_init_gpio_pin(ERR_GPIO_PIN, 1);
+
+ am200_init_gpio_pin(PCBPWR_GPIO_PIN, 0);
+ am200_set_gpio_output(PCBPWR_GPIO_PIN, 0);
+}
+
+static void am200_disable_lcd_controller(struct metronomefb_par *par)
+{
+ LCSR = 0xffffffff; /* Clear LCD Status Register */
+ LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
+
+ /* we reset and just wait for things to settle */
+ msleep(200);
+}
+
+static void am200_enable_lcd_controller(struct metronomefb_par *par)
+{
+ LCSR = 0xffffffff;
+ FDADR0 = par->metromem_desc_dma;
+ LCCR0 |= LCCR0_ENB;
+}
+
+static void am200_init_lcdc_regs(struct metronomefb_par *par)
+{
+ /* here we do:
+ - disable the lcd controller
+ - setup lcd control registers
+ - setup dma descriptor
+ - reenable lcd controller
+ */
+
+ /* disable the lcd controller */
+ am200_disable_lcd_controller(par);
+
+ /* setup lcd control registers */
+ LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS
+ | LCCR0_QDM | LCCR0_BM | LCCR0_OUM;
+
+ LCCR1 = (par->info->var.xres/2 - 1) /* pixels per line */
+ | (27 << 10) /* hsync pulse width - 1 */
+ | (33 << 16) /* eol pixel count */
+ | (33 << 24); /* bol pixel count */
+
+ LCCR2 = (par->info->var.yres - 1) /* lines per panel */
+ | (24 << 10) /* vsync pulse width - 1 */
+ | (2 << 16) /* eof pixel count */
+ | (0 << 24); /* bof pixel count */
+
+ LCCR3 = 2 /* pixel clock divisor */
+ | (24 << 8) /* AC Bias pin freq */
+ | LCCR3_16BPP /* BPP */
+ | LCCR3_PCP; /* PCP falling edge */
+
+}
+
+static void am200_post_dma_setup(struct metronomefb_par *par)
+{
+ par->metromem_desc->mFDADR0 = par->metromem_desc_dma;
+ par->metromem_desc->mFSADR0 = par->metromem_dma;
+ par->metromem_desc->mFIDR0 = 0;
+ par->metromem_desc->mLDCMD0 = par->info->var.xres
+ * par->info->var.yres;
+ am200_enable_lcd_controller(par);
+}
+
+static void am200_free_irq(struct fb_info *info)
+{
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+}
+
+static irqreturn_t am200_handle_irq(int irq, void *dev_id)
+{
+ struct fb_info *info = dev_id;
+ struct metronomefb_par *par = info->par;
+
+ wake_up_interruptible(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int am200_setup_irq(struct fb_info *info)
+{
+ int retval;
+
+ retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+ IRQF_DISABLED, "AM200", info);
+ if (retval) {
+ printk(KERN_ERR "am200epd: request_irq failed: %d\n", retval);
+ return retval;
+ }
+
+ return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING);
+}
+
+static void am200_set_rst(struct metronomefb_par *par, int state)
+{
+ am200_set_gpio_output(RST_GPIO_PIN, state);
+}
+
+static void am200_set_stdby(struct metronomefb_par *par, int state)
+{
+ am200_set_gpio_output(STDBY_GPIO_PIN, state);
+}
+
+static int am200_wait_event(struct metronomefb_par *par)
+{
+ return wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+}
+
+static int am200_wait_event_intr(struct metronomefb_par *par)
+{
+ return wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+}
+
+static struct metronome_board am200_board = {
+ .owner = THIS_MODULE,
+ .free_irq = am200_free_irq,
+ .setup_irq = am200_setup_irq,
+ .init_gpio_regs = am200_init_gpio_regs,
+ .init_lcdc_regs = am200_init_lcdc_regs,
+ .post_dma_setup = am200_post_dma_setup,
+ .set_rst = am200_set_rst,
+ .set_stdby = am200_set_stdby,
+ .met_wait_event = am200_wait_event,
+ .met_wait_event_intr = am200_wait_event_intr,
+};
+
+static struct platform_device *am200_device;
+
+static int __init am200_init(void)
+{
+ int ret;
+
+ /* request our platform independent driver */
+ request_module("metronomefb");
+
+ am200_device = platform_device_alloc("metronomefb", -1);
+ if (!am200_device)
+ return -ENOMEM;
+
+ platform_device_add_data(am200_device, &am200_board,
+ sizeof(am200_board));
+
+ /* this _add binds metronomefb to am200. metronomefb refcounts am200 */
+ ret = platform_device_add(am200_device);
+
+ if (ret)
+ platform_device_put(am200_device);
+
+ return ret;
+}
+
+static void __exit am200_exit(void)
+{
+ platform_device_unregister(am200_device);
+}
+
+module_init(am200_init);
+module_exit(am200_exit);
+
+MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
* Corporation. http://support.eink.com/community
*
* This driver is written to be used with the Metronome display controller.
- * It was tested with an E-Ink 800x600 Vizplex EPD on a Gumstix Connex board
- * using the Lyre interface board.
+ * It is intended to be architecture independent. A board specific driver
+ * must be used to perform all the physical IO interactions. An example
+ * is provided as am200epd.c
*
- * General notes:
- * - User must set metronomefb_enable=1 to enable it.
- * - See Documentation/fb/metronomefb.txt for how metronome works.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/uaccess.h>
#include <linux/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <video/metronomefb.h>
+
#include <asm/unaligned.h>
+
#define DEBUG 1
#ifdef DEBUG
#define DPRINTK(f, a...) printk(KERN_DEBUG "%s: " f, __func__ , ## a)
#define DPY_W 832
#define DPY_H 622
-struct metromem_desc {
- u32 mFDADR0;
- u32 mFSADR0;
- u32 mFIDR0;
- u32 mLDCMD0;
-};
-
-struct metromem_cmd {
- u16 opcode;
- u16 args[((64-2)/2)];
- u16 csum;
-};
-
-struct metronomefb_par {
- unsigned char *metromem;
- struct metromem_desc *metromem_desc;
- struct metromem_cmd *metromem_cmd;
- unsigned char *metromem_wfm;
- unsigned char *metromem_img;
- u16 *metromem_img_csum;
- u16 *csum_table;
- int metromemsize;
- dma_addr_t metromem_dma;
- dma_addr_t metromem_desc_dma;
- struct fb_info *info;
- wait_queue_head_t waitq;
- u8 frame_count;
-};
-
/* frame differs from image. frame includes non-visible pixels */
struct epd_frame {
int fw; /* frame width */
.transp = { 0, 0, 0 },
};
-static unsigned int metronomefb_enable;
-
+/* the waveform structure that is coming from userspace firmware */
struct waveform_hdr {
u8 stuff[32];
return 0;
}
-/* register offsets for gpio control */
-#define LED_GPIO_PIN 51
-#define STDBY_GPIO_PIN 48
-#define RST_GPIO_PIN 49
-#define RDY_GPIO_PIN 32
-#define ERR_GPIO_PIN 17
-#define PCBPWR_GPIO_PIN 16
-
-#define AF_SEL_GPIO_N 0x3
-#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2)
-#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2)
-#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2)
-#define GPDR1_OFFSET(pin) (pin - 32)
-#define GPCR1_OFFSET(pin) (pin - 32)
-#define GPSR1_OFFSET(pin) (pin - 32)
-#define GPCR0_OFFSET(pin) (pin)
-#define GPSR0_OFFSET(pin) (pin)
-
-static void metronome_set_gpio_output(int pin, int val)
-{
- u8 index;
-
- index = pin >> 4;
-
- switch (index) {
- case 1:
- if (val)
- GPSR0 |= (1 << GPSR0_OFFSET(pin));
- else
- GPCR0 |= (1 << GPCR0_OFFSET(pin));
- break;
- case 2:
- break;
- case 3:
- if (val)
- GPSR1 |= (1 << GPSR1_OFFSET(pin));
- else
- GPCR1 |= (1 << GPCR1_OFFSET(pin));
- break;
- default:
- printk(KERN_ERR "unimplemented\n");
- }
-}
-
-static void __devinit metronome_init_gpio_pin(int pin, int dir)
-{
- u8 index;
- /* dir 0 is output, 1 is input
- - do 2 things here:
- - set gpio alternate function to standard gpio
- - set gpio direction to input or output */
-
- index = pin >> 4;
- switch (index) {
- case 1:
- GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin));
-
- if (dir)
- GPDR0 &= ~(1 << pin);
- else
- GPDR0 |= (1 << pin);
- break;
- case 2:
- GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin));
-
- if (dir)
- GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
- else
- GPDR1 |= (1 << GPDR1_OFFSET(pin));
- break;
- case 3:
- GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin));
-
- if (dir)
- GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
- else
- GPDR1 |= (1 << GPDR1_OFFSET(pin));
- break;
- default:
- printk(KERN_ERR "unimplemented\n");
- }
-}
-
-static void __devinit metronome_init_gpio_regs(void)
-{
- metronome_init_gpio_pin(LED_GPIO_PIN, 0);
- metronome_set_gpio_output(LED_GPIO_PIN, 0);
-
- metronome_init_gpio_pin(STDBY_GPIO_PIN, 0);
- metronome_set_gpio_output(STDBY_GPIO_PIN, 0);
-
- metronome_init_gpio_pin(RST_GPIO_PIN, 0);
- metronome_set_gpio_output(RST_GPIO_PIN, 0);
-
- metronome_init_gpio_pin(RDY_GPIO_PIN, 1);
-
- metronome_init_gpio_pin(ERR_GPIO_PIN, 1);
-
- metronome_init_gpio_pin(PCBPWR_GPIO_PIN, 0);
- metronome_set_gpio_output(PCBPWR_GPIO_PIN, 0);
-}
-
-static void metronome_disable_lcd_controller(struct metronomefb_par *par)
-{
- LCSR = 0xffffffff; /* Clear LCD Status Register */
- LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
-
- /* we reset and just wait for things to settle */
- msleep(200);
-}
-
-static void metronome_enable_lcd_controller(struct metronomefb_par *par)
-{
- LCSR = 0xffffffff;
- FDADR0 = par->metromem_desc_dma;
- LCCR0 |= LCCR0_ENB;
-}
-
-static void __devinit metronome_init_lcdc_regs(struct metronomefb_par *par)
-{
- /* here we do:
- - disable the lcd controller
- - setup lcd control registers
- - setup dma descriptor
- - reenable lcd controller
- */
-
- /* disable the lcd controller */
- metronome_disable_lcd_controller(par);
-
- /* setup lcd control registers */
- LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS
- | LCCR0_QDM | LCCR0_BM | LCCR0_OUM;
-
- LCCR1 = (epd_frame_table[0].fw/2 - 1) /* pixels per line */
- | (27 << 10) /* hsync pulse width - 1 */
- | (33 << 16) /* eol pixel count */
- | (33 << 24); /* bol pixel count */
-
- LCCR2 = (epd_frame_table[0].fh - 1) /* lines per panel */
- | (24 << 10) /* vsync pulse width - 1 */
- | (2 << 16) /* eof pixel count */
- | (0 << 24); /* bof pixel count */
-
- LCCR3 = 2 /* pixel clock divisor */
- | (24 << 8) /* AC Bias pin freq */
- | LCCR3_16BPP /* BPP */
- | LCCR3_PCP; /* PCP falling edge */
-
- /* setup dma descriptor */
- par->metromem_desc->mFDADR0 = par->metromem_desc_dma;
- par->metromem_desc->mFSADR0 = par->metromem_dma;
- par->metromem_desc->mFIDR0 = 0;
- par->metromem_desc->mLDCMD0 = epd_frame_table[0].fw
- * epd_frame_table[0].fh;
- /* reenable lcd controller */
- metronome_enable_lcd_controller(par);
-}
-
static int metronome_display_cmd(struct metronomefb_par *par)
{
int i;
par->metromem_cmd->csum = cs;
par->metromem_cmd->opcode = opcode; /* display cmd */
- i = wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ);
- return i;
+ return par->board->met_wait_event_intr(par);
}
static int __devinit metronome_powerup_cmd(struct metronomefb_par *par)
par->metromem_cmd->csum = cs;
msleep(1);
- metronome_set_gpio_output(RST_GPIO_PIN, 1);
+ par->board->set_rst(par, 1);
msleep(1);
- metronome_set_gpio_output(STDBY_GPIO_PIN, 1);
+ par->board->set_stdby(par, 1);
- i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
- return i;
+ return par->board->met_wait_event(par);
}
static int __devinit metronome_config_cmd(struct metronomefb_par *par)
par->metromem_cmd->csum = cs;
par->metromem_cmd->opcode = 0xCC10; /* config cmd */
- i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
- return i;
+ return par->board->met_wait_event(par);
}
static int __devinit metronome_init_cmd(struct metronomefb_par *par)
par->metromem_cmd->csum = cs;
par->metromem_cmd->opcode = 0xCC20; /* init cmd */
- i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
- return i;
+ return par->board->met_wait_event(par);
}
static int __devinit metronome_init_regs(struct metronomefb_par *par)
{
int res;
- metronome_init_gpio_regs();
- metronome_init_lcdc_regs(par);
+ par->board->init_gpio_regs(par);
+
+ par->board->init_lcdc_regs(par);
+
+ /* now that lcd is setup, setup dma descriptor */
+ par->board->post_dma_setup(par);
res = metronome_powerup_cmd(par);
if (res)
return res;
res = metronome_init_cmd(par);
- if (res)
- return res;
return res;
}
cksum = calc_img_cksum((u16 *) par->metromem_img,
(epd_frame_table[0].fw * DPY_H)/2);
- *((u16 *) (par->metromem_img) +
+ *((u16 *)(par->metromem_img) +
(epd_frame_table[0].fw * DPY_H)/2) = cksum;
metronome_display_cmd(par);
}
{
int i;
u16 csum = 0;
- u16 *buf = (u16 __force *) (par->info->screen_base + index);
- u16 *img = (u16 *) (par->metromem_img + index);
+ u16 *buf = (u16 __force *)(par->info->screen_base + index);
+ u16 *img = (u16 *)(par->metromem_img + index);
/* swizzle from vm to metromem and recalc cksum at the same time*/
for (i = 0; i < PAGE_SIZE/2; i++) {
count = total_size - p;
}
- dst = (void __force *) (info->screen_base + p);
+ dst = (void __force *)(info->screen_base + p);
if (copy_from_user(dst, buf, count))
err = -EFAULT;
.deferred_io = metronomefb_dpy_deferred_io,
};
-static irqreturn_t metronome_handle_irq(int irq, void *dev_id)
-{
- struct fb_info *info = dev_id;
- struct metronomefb_par *par = info->par;
-
- wake_up_interruptible(&par->waitq);
- return IRQ_HANDLED;
-}
-
static int __devinit metronomefb_probe(struct platform_device *dev)
{
struct fb_info *info;
+ struct metronome_board *board;
int retval = -ENOMEM;
int videomemorysize;
unsigned char *videomemory;
int cmd_size, wfm_size, img_size, padding_size, totalsize;
int i;
+ /* pick up board specific routines */
+ board = dev->dev.platform_data;
+ if (!board)
+ return -EINVAL;
+
+ /* try to count device specific driver, if can't, platform recalls */
+ if (!try_module_get(board->owner))
+ return -ENODEV;
+
/* we have two blocks of memory.
info->screen_base which is vm, and is the fb used by apps.
par->metromem which is physically contiguous memory and
contains the display controller commands, waveform,
processed image data and padding. this is the data pulled
- by the pxa255's LCD controller and pushed to Metronome */
+ by the device's LCD controller and pushed to Metronome */
videomemorysize = (DPY_W*DPY_H);
videomemory = vmalloc(videomemorysize);
if (!videomemory)
- return retval;
+ return -ENOMEM;
memset(videomemory, 0, videomemorysize);
if (!info)
goto err_vfree;
- info->screen_base = (char __iomem *) videomemory;
+ info->screen_base = (char __force __iomem *)videomemory;
info->fbops = &metronomefb_ops;
info->var = metronomefb_var;
info->fix.smem_len = videomemorysize;
par = info->par;
par->info = info;
+ par->board = board;
init_waitqueue_head(&par->waitq);
/* this table caches per page csum values. */
par->metromem_desc_dma = par->metromem_dma + cmd_size + wfm_size
+ img_size + padding_size;
- /* load the waveform in. assume mode 3, temp 31 for now */
- /* a) request the waveform file from userspace
+ /* load the waveform in. assume mode 3, temp 31 for now
+ a) request the waveform file from userspace
b) process waveform and decode into metromem */
-
- retval = request_firmware(&fw_entry, "waveform.wbf", &dev->dev);
+ retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev);
if (retval < 0) {
printk(KERN_ERR "metronomefb: couldn't get waveform\n");
goto err_dma_free;
}
release_firmware(fw_entry);
- retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), metronome_handle_irq,
- IRQF_DISABLED, "Metronome", info);
- if (retval) {
- dev_err(&dev->dev, "request_irq failed: %d\n", retval);
+ if (board->setup_irq(info))
goto err_ld_wfm;
- }
- set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING);
retval = metronome_init_regs(par);
if (retval < 0)
err_fb_rel:
framebuffer_release(info);
err_free_irq:
- free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+ board->free_irq(info);
err_ld_wfm:
release_firmware(fw_entry);
err_dma_free:
vfree(par->csum_table);
err_vfree:
vfree(videomemory);
+ module_put(board->owner);
return retval;
}
vfree(par->csum_table);
unregister_framebuffer(info);
vfree((void __force *)info->screen_base);
- free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+ par->board->free_irq(info);
+ module_put(par->board->owner);
framebuffer_release(info);
}
return 0;
.probe = metronomefb_probe,
.remove = metronomefb_remove,
.driver = {
+ .owner = THIS_MODULE,
.name = "metronomefb",
},
};
-static struct platform_device *metronomefb_device;
-
static int __init metronomefb_init(void)
{
- int ret;
-
- if (!metronomefb_enable) {
- printk(KERN_ERR
- "Use metronomefb_enable to enable the device\n");
- return -ENXIO;
- }
-
- ret = platform_driver_register(&metronomefb_driver);
- if (!ret) {
- metronomefb_device = platform_device_alloc("metronomefb", 0);
- if (metronomefb_device)
- ret = platform_device_add(metronomefb_device);
- else
- ret = -ENOMEM;
-
- if (ret) {
- platform_device_put(metronomefb_device);
- platform_driver_unregister(&metronomefb_driver);
- }
- }
- return ret;
-
+ return platform_driver_register(&metronomefb_driver);
}
static void __exit metronomefb_exit(void)
{
- platform_device_unregister(metronomefb_device);
platform_driver_unregister(&metronomefb_driver);
}
-module_param(metronomefb_enable, uint, 0);
-MODULE_PARM_DESC(metronomefb_enable, "Enable communication with Metronome");
-
module_init(metronomefb_init);
module_exit(metronomefb_exit);
projects / users / hch / configfs.git / commitdiff