select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
- select HAVE_GENERIC_HARDIRQS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
- select HAVE_GENERIC_HARDIRQS
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
- select HAVE_GENERIC_HARDIRQS
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_IDE if PCI || ISA || PCMCIA
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select HAVE_GENERIC_DMA_COHERENT
- select HAVE_GENERIC_HARDIRQS
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_MEMBLOCK
select HAVE_PERF_EVENTS
select HAVE_CLK
select HAVE_OPROFILE
select HAVE_KPROBES
- select HAVE_GENERIC_HARDIRQS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_ATOMIC64
select HAVE_UNDERSCORE_SYMBOL_PREFIX
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
- select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
select USE_GENERIC_SMP_HELPERS if SMP
select GENERIC_IRQ_SHOW
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
- select HAVE_GENERIC_HARDIRQS
select HAVE_MEMBLOCK
select SPARSE_IRQ
select IRQ_DOMAIN
default y
select HAVE_IDE
select GENERIC_ATOMIC64
- select HAVE_GENERIC_HARDIRQS
select HAVE_UID16
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_ARCH_TRACEHOOK
select HAVE_PERF_EVENTS
select HAVE_UID16
- select HAVE_GENERIC_HARDIRQS
select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
bool
default y
select HAVE_IDE
- select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select HAVE_UID16
select VIRT_TO_BUS
# select GENERIC_PENDING_IRQ if SMP
select GENERIC_ATOMIC64
select HAVE_PERF_EVENTS
- select HAVE_GENERIC_HARDIRQS
# GENERIC_ALLOCATOR is used by dma_alloc_coherent()
select GENERIC_ALLOCATOR
select GENERIC_IRQ_SHOW
select HAVE_KVM
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
- select HAVE_GENERIC_HARDIRQS
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_VIRT_CPU_ACCOUNTING
select HAVE_KERNEL_LZMA
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_DEBUG_BUGVERBOSE
- select HAVE_GENERIC_HARDIRQS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select HAVE_IDE
select HAVE_AOUT if MMU
select HAVE_DEBUG_BUGVERBOSE
- select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
select HAVE_UID16
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
- select HAVE_GENERIC_HARDIRQS
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_DEBUG_KMEMLEAK
select IRQ_DOMAIN
- select HAVE_GENERIC_HARDIRQS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
- select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
config MN10300
def_bool y
select HAVE_OPROFILE
- select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_SHOW
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_ARCH_TRACEHOOK
select HAVE_MEMBLOCK
select ARCH_REQUIRE_GPIOLIB
select HAVE_ARCH_TRACEHOOK
- select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select HAVE_PERF_EVENTS
select GENERIC_ATOMIC64 if !64BIT
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
- select HAVE_GENERIC_HARDIRQS
select BROKEN_RODATA
select GENERIC_IRQ_PROBE
select GENERIC_PCI_IOMAP
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
- select HAVE_GENERIC_HARDIRQS
select ARCH_WANT_IPC_PARSE_VERSION
select SPARSE_IRQ
select IRQ_DOMAIN
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
- select HAVE_GENERIC_HARDIRQS
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZ4
config SCORE
def_bool y
- select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP
select GENERIC_ATOMIC64
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_GENERIC_HARDIRQS
select MAY_HAVE_SPARSE_IRQ
select IRQ_FORCED_THREADING
select RTC_LIB
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select HAVE_ARCH_JUMP_LABEL
- select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_SHOW
select ARCH_WANT_IPC_PARSE_VERSION
select USE_GENERIC_SMP_HELPERS if SMP
select USE_GENERIC_SMP_HELPERS
select CC_OPTIMIZE_FOR_SIZE
select HAVE_DEBUG_KMEMLEAK
- select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
select GENERIC_IRQ_SHOW
config UML
bool
default y
- select HAVE_GENERIC_HARDIRQS
select HAVE_UID16
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
-CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_SHOW=y
#
def_bool y
select HAVE_MEMBLOCK
select HAVE_GENERIC_DMA_COHERENT
- select HAVE_GENERIC_HARDIRQS
select HAVE_DMA_ATTRS
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_USER_RETURN_NOTIFIER
select ARCH_BINFMT_ELF_RANDOMIZE_PIE
select HAVE_ARCH_JUMP_LABEL
- select HAVE_GENERIC_HARDIRQS
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select SPARSE_IRQ
select GENERIC_FIND_FIRST_BIT
select HAVE_IDE
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
- select HAVE_GENERIC_HARDIRQS
select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
# CONFIG_UID16 is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
-CONFIG_GENERIC_HARDIRQS=y
#
# Code maturity level options
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_NO_IOPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_NO_IOPORT=y
config BLK_DEV_PCIESSD_MTIP32XX
tristate "Block Device Driver for Micron PCIe SSDs"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
help
This enables the block driver for Micron PCIe SSDs.
#include <linux/fips.h>
#include <linux/ptrace.h>
#include <linux/kmemcheck.h>
-
-#ifdef CONFIG_GENERIC_HARDIRQS
-# include <linux/irq.h>
-#endif
+#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
config DW_DMAC_CORE
tristate "Synopsys DesignWare AHB DMA support"
- depends on GENERIC_HARDIRQS
select DMA_ENGINE
config DW_DMAC
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
select MFD_VX855
help
config GPIO_MAX732X_IRQ
bool "Interrupt controller support for MAX732x"
- depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
+ depends on GPIO_MAX732X=y
help
Say yes here to enable the max732x to be used as an interrupt
controller. It requires the driver to be built in the kernel.
config GPIO_RDC321X
tristate "RDC R-321x GPIO support"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
select MFD_RDC321X
help
config HID_SENSOR_HUB
tristate "HID Sensors framework support"
- depends on HID && GENERIC_HARDIRQS
+ depends on HID
select MFD_CORE
default n
---help---
config I2C_SMBUS
tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
- depends on GENERIC_HARDIRQS
help
Say Y here if you want support for SMBus extensions to the I2C
specification. At the moment, the only supported extension is
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
config I2C_OCORES
tristate "OpenCores I2C Controller"
- depends on GENERIC_HARDIRQS
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
config I2C_PARPORT
tristate "Parallel port adapter"
- depends on PARPORT && GENERIC_HARDIRQS
+ depends on PARPORT
select I2C_ALGOBIT
select I2C_SMBUS
help
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
- depends on GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
menuconfig IIO
tristate "Industrial I/O support"
- depends on GENERIC_HARDIRQS
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
config INFINIBAND_QIB_DCA
bool "QIB DCA support"
- depends on INFINIBAND_QIB && DCA && SMP && GENERIC_HARDIRQS && !(INFINIBAND_QIB=y && DCA=m)
+ depends on INFINIBAND_QIB && DCA && SMP && !(INFINIBAND_QIB=y && DCA=m)
default y
---help---
Setting this enables DCA support on some Intel chip sets
config KEYBOARD_TCA8418
tristate "TCA8418 Keypad Support"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select INPUT_MATRIXKMAP
help
This driver implements basic keypad functionality
config KEYBOARD_LM8323
tristate "LM8323 keypad chip"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
depends on LEDS_CLASS
help
If you say yes here you get support for the National Semiconductor
config SERIO_ARC_PS2
tristate "ARC PS/2 support"
- depends on GENERIC_HARDIRQS
help
Say Y here if you have an ARC FPGA platform with a PS/2
controller in it.
config TOUCHSCREEN_MMS114
tristate "MELFAS MMS114 touchscreen"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
help
Say Y here if you have the MELFAS MMS114 touchscreen controller
chip in your system.
config TOUCHSCREEN_TSC2005
tristate "TSC2005 based touchscreens"
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
help
Say Y here if you have a TSC2005 based touchscreen.
config VIDEO_SH_VEU
tristate "SuperH VEU mem2mem video processing driver"
- depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS && HAS_DMA
+ depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
config RADIO_WL1273
tristate "Texas Instruments WL1273 I2C FM Radio"
- depends on I2C && VIDEO_V4L2 && GENERIC_HARDIRQS
+ depends on I2C && VIDEO_V4L2
select MFD_CORE
select MFD_WL1273_CORE
select FW_LOADER
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Support for the AS3711 PMIC from AMS
config MFD_AAT2870_CORE
bool "AnalogicTech AAT2870"
select MFD_CORE
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GPIOLIB
help
If you say yes here you get support for the AAT2870.
This driver provides common support for accessing the device,
config MFD_ASIC3
bool "Compaq ASIC3"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ depends on GPIOLIB && ARM
select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
select REGMAP_SPI
select REGMAP_IRQ
select PMIC_DA9052
- depends on SPI_MASTER=y && GENERIC_HARDIRQS
+ depends on SPI_MASTER=y
help
Support for the Dialog Semiconductor DA9052 PMIC
when controlled using SPI. This driver provides common support
select REGMAP_I2C
select REGMAP_IRQ
select PMIC_DA9052
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Support for the Dialog Semiconductor DA9052 PMIC
when controlled using I2C. This driver provides common support
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Say yes here for support of Dialog Semiconductor DA9055. This is
a Power Management IC. This driver provides common support for
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
This includes the I2C driver and core APIs.
config MFD_MC13XXX
tristate
- depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
+ depends on (SPI_MASTER || I2C)
select MFD_CORE
select MFD_MC13783
help
config MFD_MC13XXX_SPI
tristate "Freescale MC13783 and MC13892 SPI interface"
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
select REGMAP_SPI
select MFD_MC13XXX
help
config MFD_MC13XXX_I2C
tristate "Freescale MC13892 I2C interface"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select REGMAP_I2C
select MFD_MC13XXX
help
config HTC_EGPIO
bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ depends on GPIOLIB && ARM
help
This driver supports the CPLD egpio chip present on
several HTC phones. It provides basic support for input
config HTC_PASIC3
tristate "HTC PASIC3 LED/DS1WM chip support"
select MFD_CORE
- depends on GENERIC_HARDIRQS
help
This core driver provides register access for the LED/DS1WM
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
config LPC_ICH
tristate "Intel ICH LPC"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
The LPC bridge function of the Intel ICH provides support for
config LPC_SCH
tristate "Intel SCH LPC"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
LPC bridge function of the Intel SCH provides support for
config MFD_JANZ_CMODIO
tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
help
This is the core driver for the Janz CMOD-IO PCI MODULbus
carrier board. This device is a PCI to MODULbus bridge which may
config MFD_88PM800
tristate "Marvell 88PM800"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
config MFD_88PM805
tristate "Marvell 88PM805"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
config MFD_88PM860X
bool "Marvell 88PM8606/88PM8607"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select MFD_CORE
help
config MFD_MAX77686
bool "Maxim Semiconductor MAX77686 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN
config MFD_MAX77693
bool "Maxim Semiconductor MAX77693 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
config MFD_MAX8907
tristate "Maxim Semiconductor MAX8907 PMIC Support"
select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select REGMAP_IRQ
help
config MFD_MAX8925
bool "Maxim Semiconductor MAX8925 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
config MFD_MAX8997
bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select IRQ_DOMAIN
help
config MFD_MAX8998
bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select IRQ_DOMAIN
help
config EZX_PCAP
bool "Motorola EZXPCAP Support"
- depends on GENERIC_HARDIRQS && SPI_MASTER
+ depends on SPI_MASTER
help
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
config MFD_VIPERBOARD
tristate "Nano River Technologies Viperboard"
select MFD_CORE
- depends on USB && GENERIC_HARDIRQS
+ depends on USB
default n
help
Say yes here if you want support for Nano River Technologies
config MFD_RETU
tristate "Nokia Retu and Tahvo multi-function device"
select MFD_CORE
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select REGMAP_IRQ
help
Retu and Tahvo are a multi-function devices found on Nokia
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
help
Say yes here if you want to have support for the RDC R-321x SoC
southbridge which provides access to GPIOs and Watchdog using the
config MFD_RTSX_PCI
tristate "Realtek PCI-E card reader"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
This supports for Realtek PCI-Express card reader including rts5209,
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
config MFD_SEC_CORE
bool "SAMSUNG Electronics PMIC Series Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
config MFD_SMSC
bool "SMSC ECE1099 series chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
- depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
+ depends on I2C=y && ABX500_CORE
select MFD_CORE
default y if ARCH_U300
help
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+ depends on ABX500_CORE && MFD_DB8500_PRCMU
select POWER_SUPPLY
select MFD_CORE
select IRQ_DOMAIN
config MFD_STMPE
bool "STMicroelectronics STMPE"
- depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
+ depends on (I2C=y || SPI_MASTER=y)
select MFD_CORE
help
Support for the STMPE family of I/O Expanders from
config MFD_STA2X11
bool "STMicroelectronics STA2X11"
- depends on STA2X11 && GENERIC_HARDIRQS
+ depends on STA2X11
select MFD_CORE
select REGMAP_MMIO
select MFD_CORE
select REGMAP
select REGMAP_MMIO
- depends on GENERIC_HARDIRQS
help
If you say yes here you get support for Texas Instruments series
of Touch Screen /ADC chips.
config MFD_LP8788
bool "TI LP8788 Power Management Unit Driver"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
If you say yes here you get support for the Palmas
series of PMIC chips from Texas Instruments.
config MFD_TI_SSP
tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+ depends on ARCH_DAVINCI_TNETV107X
select MFD_CORE
---help---
Say Y here if you want support for the Sequencer Serial Port
select REGULATOR
select MFD_CORE
select REGULATOR_FIXED_VOLTAGE
- depends on GENERIC_HARDIRQS
help
This option enables a driver for the TP61050/TPS61052
high-power "white LED driver". This boost converter is
config TPS6507X
tristate "TI TPS6507x Power Management / Touch Screen chips"
select MFD_CORE
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
help
If you say yes here you get support for the TPS6507x series of
Power Management / Touch Screen chips. These include voltage
config MFD_TPS65090
bool "TI TPS65090 Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
config MFD_TPS65217
tristate "TI TPS65217 Power Management / White LED chips"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select MFD_CORE
select REGMAP_I2C
help
config MFD_TPS6586X
bool "TI TPS6586x Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
config MFD_TPS65910
bool "TI TPS65910 Power Management chip"
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GPIOLIB
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
bool "TI TPS65912 Power Management chip with I2C"
select MFD_CORE
select MFD_TPS65912
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GPIOLIB
help
If you say yes here you get support for the TPS65912 series of
PM chips with I2C interface.
bool "TI TPS65912 Power Management chip with SPI"
select MFD_CORE
select MFD_TPS65912
- depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
+ depends on SPI_MASTER && GPIOLIB
help
If you say yes here you get support for the TPS65912 series of
PM chips with SPI interface.
config MFD_TPS80031
bool "TI TPS80031/TPS80032 Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
config TWL4030_CORE
bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select IRQ_DOMAIN
select REGMAP_I2C
help
config MFD_TWL4030_AUDIO
bool "TI TWL4030 Audio"
- depends on TWL4030_CORE && GENERIC_HARDIRQS
+ depends on TWL4030_CORE
select MFD_CORE
default n
config TWL6040_CORE
bool "TI TWL6040 audio codec"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
config MFD_WL1273_CORE
tristate "TI WL1273 FM radio"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select MFD_CORE
default n
help
depends on I2C
select MFD_CORE
select REGMAP_I2C
- depends on GENERIC_HARDIRQS
help
Say yes here to enable support for National Semiconductor / TI
LM3533 Lighting Power chips.
config MFD_TC3589X
bool "Toshiba TC35892 and variants"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
help
Support for the Toshiba TC35892 and variants I/O Expander.
config MFD_T7L66XB
bool "Toshiba T7L66XB"
- depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
+ depends on ARM && HAVE_CLK
select MFD_CORE
select MFD_TMIO
help
config MFD_VX855
tristate "VIA VX855/VX875 integrated south bridge"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
Say yes here to enable support for various functions of the
select MFD_ARIZONA
select MFD_CORE
select REGMAP_I2C
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
help
Support for the Wolfson Microelectronics Arizona platform audio SoC
core functionality controlled via I2C.
select MFD_ARIZONA
select MFD_CORE
select REGMAP_SPI
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
help
Support for the Wolfson Microelectronics Arizona platform audio SoC
core functionality controlled via I2C.
config MFD_WM8400
bool "Wolfson Microelectronics WM8400"
select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
config MFD_WM831X
bool
- depends on GENERIC_HARDIRQS
config MFD_WM831X_I2C
bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
select MFD_WM831X
select REGMAP_I2C
select IRQ_DOMAIN
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
when controlled using I2C. This driver provides common support
select MFD_WM831X
select REGMAP_SPI
select IRQ_DOMAIN
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
when controlled using SPI. This driver provides common support
config MFD_WM8350
bool
- depends on GENERIC_HARDIRQS
config MFD_WM8350_I2C
bool "Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
The WM8350 is an integrated audio and power management
subsystem with watchdog and RTC functionality for embedded
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
The WM8994 is a highly integrated hi-fi CODEC designed for
smartphone applicatiosn. As well as audio functionality it
config CB710_CORE
tristate "ENE CB710/720 Flash memory card reader support"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
help
This option enables support for PCI ENE CB710/720 Flash memory card
reader found in some laptops (ie. some versions of HP Compaq nx9500).
config MMC_CB710
tristate "ENE CB710 MMC/SD Interface support"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select CB710_CORE
help
This option enables support for MMC/SD part of ENE CB710/720 Flash
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
- depends on GENERIC_HARDIRQS && HAS_DMA
+ depends on HAS_DMA
select MACB
---help---
If you wish to compile a kernel for the AT91RM9200 and enable
config P54_SPI
tristate "Prism54 SPI (stlc45xx) support"
- depends on P54_COMMON && SPI_MASTER && GENERIC_HARDIRQS
+ depends on P54_COMMON && SPI_MASTER
---help---
This driver is for stlc4550 or stlc4560 based wireless chips
such as Nokia's N800/N810 Portable Internet Tablet.
menuconfig WL1251
tristate "TI wl1251 driver support"
- depends on MAC80211 && GENERIC_HARDIRQS
+ depends on MAC80211
select FW_LOADER
select CRC7
---help---
config WLCORE
tristate "TI wlcore support"
- depends on WL_TI && GENERIC_HARDIRQS && MAC80211
+ depends on WL_TI && MAC80211
select FW_LOADER
---help---
This module contains the main code for TI WLAN chips. It abstracts
/* Arch hooks */
-#if defined(CONFIG_GENERIC_HARDIRQS)
int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
{
struct msi_chip *chip = dev->bus->msi;
return chip->check_device(chip, dev, nvec, type);
}
-#else
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
- return -ENOSYS;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-}
-
-int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type)
-{
- return 0;
-}
-#endif /* CONFIG_GENERIC_HARDIRQS */
int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
desc->masked = __msix_mask_irq(desc, flag);
}
-#ifdef CONFIG_GENERIC_HARDIRQS
-
static void msi_set_mask_bit(struct irq_data *data, u32 flag)
{
struct msi_desc *desc = irq_data_get_msi(data);
msi_set_mask_bit(data, 0);
}
-#endif /* CONFIG_GENERIC_HARDIRQS */
-
void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
{
BUG_ON(entry->dev->current_state != PCI_D0);
nvec = entry->nvec_used;
else
nvec = 1 << entry->msi_attrib.multiple;
-#ifdef CONFIG_GENERIC_HARDIRQS
for (i = 0; i < nvec; i++)
BUG_ON(irq_has_action(entry->irq + i));
-#endif
}
arch_teardown_msi_irqs(dev);
config CHARGER_MAX8903
tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
- depends on GENERIC_HARDIRQS
help
Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
The driver supports controlling charger-enable and current-limit
config BATTERY_GOLDFISH
tristate "Goldfish battery driver"
- depends on GENERIC_HARDIRQS && (GOLDFISH || COMPILE_TEST)
+ depends on GOLDFISH || COMPILE_TEST
help
Say Y to enable support for the battery and AC power in the
Goldfish emulator.
config PPS_CLIENT_GPIO
tristate "PPS client using GPIO"
- depends on PPS && GENERIC_HARDIRQS
+ depends on PPS
help
If you say yes here you get support for a PPS source using
GPIO. To be useful you must also register a platform device
config SPI_ALTERA
tristate "Altera SPI Controller"
- depends on GENERIC_HARDIRQS
select SPI_BITBANG
help
This is the driver for the Altera SPI Controller.
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
- depends on (ARCH_PXA || PCI || ACPI) && GENERIC_HARDIRQS
+ depends on (ARCH_PXA || PCI || ACPI)
select PXA_SSP if ARCH_PXA
help
This enables using a PXA2xx or Sodaville SSP port as a SPI master
if TTY
menu "Serial drivers"
- depends on HAS_IOMEM && GENERIC_HARDIRQS
+ depends on HAS_IOMEM
source "drivers/tty/serial/8250/Kconfig"
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
- depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
+ depends on (USB || USB_GADGET) && HAS_DMA
depends on EXTCON
select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
help
config USB_MV_UDC
tristate "Marvell USB2.0 Device Controller"
- depends on GENERIC_HARDIRQS && HAS_DMA
+ depends on HAS_DMA
help
Marvell Socs (including PXA and MMP series) include a high speed
USB2.0 OTG controller, which can be configured as high speed or
config USB_EG20T
tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
help
This is a USB device driver for EG20T PCH.
EG20T PCH is the platform controller hub that is used in Intel's
config USB_OXU210HP_HCD
tristate "OXU210HP HCD support"
- depends on GENERIC_HARDIRQS
---help---
The OXU210HP is an USB host/OTG/device controller. Enable this
option if your board has this chip. If unsure, say N.
config USB_MUSB_TUSB6010
tristate "TUSB6010"
- depends on GENERIC_HARDIRQS
config USB_MUSB_OMAP2PLUS
tristate "OMAP2430 and onwards"
config USB_RENESAS_USBHS
tristate 'Renesas USBHS controller'
- depends on USB_GADGET && GENERIC_HARDIRQS
+ depends on USB_GADGET
default n
help
Renesas USBHS is a discrete USB host and peripheral controller chip
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1 && GENERIC_HARDIRQS
+ depends on W1
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
return rmap->obj[rmap->near[cpu].index];
}
-#ifdef CONFIG_GENERIC_HARDIRQS
-
/**
* alloc_irq_cpu_rmap - allocate CPU affinity reverse-map for IRQs
* @size: Number of objects to be mapped
extern int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq);
-#endif
#endif /* __LINUX_CPU_RMAP_H */
#include <linux/vtime.h>
-#if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS)
extern void synchronize_irq(unsigned int irq);
-#else
-# define synchronize_irq(irq) barrier()
-#endif
#if defined(CONFIG_TINY_RCU)
extern irqreturn_t no_action(int cpl, void *dev_id);
-#ifdef CONFIG_GENERIC_HARDIRQS
extern int __must_check
request_threaded_irq(unsigned int irq, irq_handler_t handler,
irq_handler_t thread_fn,
extern int __must_check
request_percpu_irq(unsigned int irq, irq_handler_t handler,
const char *devname, void __percpu *percpu_dev_id);
-#else
-
-extern int __must_check
-request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
- const char *name, void *dev);
-
-/*
- * Special function to avoid ifdeffery in kernel/irq/devres.c which
- * gets magically built by GENERIC_HARDIRQS=n architectures (sparc,
- * m68k). I really love these $@%#!* obvious Makefile references:
- * ../../../kernel/irq/devres.o
- */
-static inline int __must_check
-request_threaded_irq(unsigned int irq, irq_handler_t handler,
- irq_handler_t thread_fn,
- unsigned long flags, const char *name, void *dev)
-{
- return request_irq(irq, handler, flags, name, dev);
-}
-
-static inline int __must_check
-request_any_context_irq(unsigned int irq, irq_handler_t handler,
- unsigned long flags, const char *name, void *dev_id)
-{
- return request_irq(irq, handler, flags, name, dev_id);
-}
-
-static inline int __must_check
-request_percpu_irq(unsigned int irq, irq_handler_t handler,
- const char *devname, void __percpu *percpu_dev_id)
-{
- return request_irq(irq, handler, 0, devname, percpu_dev_id);
-}
-#endif
extern void free_irq(unsigned int, void *);
extern void free_percpu_irq(unsigned int, void __percpu *);
extern void enable_percpu_irq(unsigned int irq, unsigned int type);
/* The following three functions are for the core kernel use only. */
-#ifdef CONFIG_GENERIC_HARDIRQS
extern void suspend_device_irqs(void);
extern void resume_device_irqs(void);
#ifdef CONFIG_PM_SLEEP
#else
static inline int check_wakeup_irqs(void) { return 0; }
#endif
-#else
-static inline void suspend_device_irqs(void) { };
-static inline void resume_device_irqs(void) { };
-static inline int check_wakeup_irqs(void) { return 0; }
-#endif
-#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+#if defined(CONFIG_SMP)
extern cpumask_var_t irq_default_affinity;
{
return -EINVAL;
}
-#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
+#endif /* CONFIG_SMP */
-#ifdef CONFIG_GENERIC_HARDIRQS
/*
* Special lockdep variants of irq disabling/enabling.
* These should be used for locking constructs that
return irq_set_irq_wake(irq, 0);
}
-#else /* !CONFIG_GENERIC_HARDIRQS */
-/*
- * NOTE: non-genirq architectures, if they want to support the lock
- * validator need to define the methods below in their asm/irq.h
- * files, under an #ifdef CONFIG_LOCKDEP section.
- */
-#ifndef CONFIG_LOCKDEP
-# define disable_irq_nosync_lockdep(irq) disable_irq_nosync(irq)
-# define disable_irq_nosync_lockdep_irqsave(irq, flags) \
- disable_irq_nosync(irq)
-# define disable_irq_lockdep(irq) disable_irq(irq)
-# define enable_irq_lockdep(irq) enable_irq(irq)
-# define enable_irq_lockdep_irqrestore(irq, flags) \
- enable_irq(irq)
-# endif
-
-static inline int enable_irq_wake(unsigned int irq)
-{
- return 0;
-}
-
-static inline int disable_irq_wake(unsigned int irq)
-{
- return 0;
-}
-#endif /* CONFIG_GENERIC_HARDIRQS */
-
#ifdef CONFIG_IRQ_FORCED_THREADING
extern bool force_irqthreads;
* if more than one irq occurred.
*/
-#if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE)
+#if !defined(CONFIG_GENERIC_IRQ_PROBE)
static inline unsigned long probe_irq_on(void)
{
return 0;
extern void irq_cpu_offline(void);
extern int __irq_set_affinity_locked(struct irq_data *data, const struct cpumask *cpumask);
-#ifdef CONFIG_GENERIC_HARDIRQS
-
#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
void irq_move_irq(struct irq_data *data);
void irq_move_masked_irq(struct irq_data *data);
static inline void irq_gc_unlock(struct irq_chip_generic *gc) { }
#endif
-#else /* !CONFIG_GENERIC_HARDIRQS */
-
-extern struct msi_desc *irq_get_msi_desc(unsigned int irq);
-extern int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry);
-
-#endif /* CONFIG_GENERIC_HARDIRQS */
-
#endif /* _LINUX_IRQ_H */
extern struct irq_desc irq_desc[NR_IRQS];
#endif
-#ifdef CONFIG_GENERIC_HARDIRQS
-
static inline struct irq_data *irq_desc_get_irq_data(struct irq_desc *desc)
{
return &desc->irq_data;
desc->preflow_handler = handler;
}
#endif
-#endif
#endif
#include <uapi/linux/irqnr.h>
-#ifndef CONFIG_GENERIC_HARDIRQS
-#include <asm/irq.h>
-
-/*
- * Wrappers for non-genirq architectures:
- */
-#define nr_irqs NR_IRQS
-#define irq_to_desc(irq) (&irq_desc[irq])
-
-# define for_each_irq_desc(irq, desc) \
- for (irq = 0; irq < nr_irqs; irq++)
-
-# define for_each_irq_desc_reverse(irq, desc) \
- for (irq = nr_irqs - 1; irq >= 0; irq--)
-
-#else /* CONFIG_GENERIC_HARDIRQS */
-
extern int nr_irqs;
extern struct irq_desc *irq_to_desc(unsigned int irq);
unsigned int irq_get_next_irq(unsigned int offset);
for (irq = irq_get_next_irq(0); irq < nr_irqs; \
irq = irq_get_next_irq(irq + 1))
-#endif /* CONFIG_GENERIC_HARDIRQS */
-
#define for_each_irq_nr(irq) \
for (irq = 0; irq < nr_irqs; irq++)
};
struct kernel_stat {
-#ifndef CONFIG_GENERIC_HARDIRQS
- unsigned int irqs[NR_IRQS];
-#endif
unsigned long irqs_sum;
unsigned int softirqs[NR_SOFTIRQS];
};
extern unsigned long long nr_context_switches(void);
-#ifndef CONFIG_GENERIC_HARDIRQS
-
-struct irq_desc;
-
-static inline void kstat_incr_irqs_this_cpu(unsigned int irq,
- struct irq_desc *desc)
-{
- __this_cpu_inc(kstat.irqs[irq]);
- __this_cpu_inc(kstat.irqs_sum);
-}
-
-static inline unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
-{
- return kstat_cpu(cpu).irqs[irq];
-}
-#else
#include <linux/irq.h>
extern unsigned int kstat_irqs_cpu(unsigned int irq, int cpu);
__this_cpu_inc(kstat.irqs_sum); \
} while (0)
-#endif
-
static inline void kstat_incr_softirqs_this_cpu(unsigned int irq)
{
__this_cpu_inc(kstat.softirqs[irq]);
/*
* Number of interrupts per specific IRQ source, since bootup
*/
-#ifndef CONFIG_GENERIC_HARDIRQS
-static inline unsigned int kstat_irqs(unsigned int irq)
-{
- unsigned int sum = 0;
- int cpu;
-
- for_each_possible_cpu(cpu)
- sum += kstat_irqs_cpu(irq, cpu);
-
- return sum;
-}
-#else
extern unsigned int kstat_irqs(unsigned int irq);
-#endif
/*
* Number of interrupts per cpu, since bootup
obj-y += power/
obj-y += printk/
obj-y += cpu/
+obj-y += irq/
obj-$(CONFIG_CHECKPOINT_RESTORE) += kcmp.o
obj-$(CONFIG_FREEZER) += freezer.o
obj-$(CONFIG_KGDB) += debug/
obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
-obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
obj-$(CONFIG_TREE_RCU) += rcutree.o
-# Select this to activate the generic irq options below
-config HAVE_GENERIC_HARDIRQS
- bool
-
-if HAVE_GENERIC_HARDIRQS
menu "IRQ subsystem"
-#
-# Interrupt subsystem related configuration options
-#
-config GENERIC_HARDIRQS
- def_bool y
-
# Options selectable by the architecture code
# Make sparse irq Kconfig switch below available
If you don't know what to do here, say N.
endmenu
-endif
return 0;
}
-#ifdef CONFIG_GENERIC_HARDIRQS
int __init __weak arch_probe_nr_irqs(void)
{
return NR_IRQS_LEGACY;
{
return 0;
}
-#endif
config DEBUG_SHIRQ
bool "Debug shared IRQ handlers"
- depends on DEBUG_KERNEL && GENERIC_HARDIRQS
+ depends on DEBUG_KERNEL
help
Enable this to generate a spurious interrupt as soon as a shared
interrupt handler is registered, and just before one is deregistered.
*/
#include <linux/cpu_rmap.h>
-#ifdef CONFIG_GENERIC_HARDIRQS
#include <linux/interrupt.h>
-#endif
#include <linux/export.h>
/*
}
EXPORT_SYMBOL(cpu_rmap_update);
-#ifdef CONFIG_GENERIC_HARDIRQS
-
/* Glue between IRQ affinity notifiers and CPU rmaps */
struct irq_glue {
return rc;
}
EXPORT_SYMBOL(irq_cpu_rmap_add);
-
-#endif /* CONFIG_GENERIC_HARDIRQS */
config RFS_ACCEL
boolean
- depends on RPS && GENERIC_HARDIRQS
+ depends on RPS
select CPU_RMAP
default y
select SND_SOC_WM8782
select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8900 if I2C
- select SND_SOC_WM8903 if I2C && GENERIC_HARDIRQS
+ select SND_SOC_WM8903 if I2C
select SND_SOC_WM8904 if I2C
select SND_SOC_WM8940 if I2C
select SND_SOC_WM8955 if I2C
config SND_SOC_SAMSUNG_SMDK_WM8994
tristate "SoC I2S Audio support for WM8994 on SMDK"
depends on SND_SOC_SAMSUNG
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
select SND_SAMSUNG_I2S
config SND_SOC_GONI_AQUILA_WM8994
tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
depends on SND_SOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select SND_SAMSUNG_I2S
select MFD_WM8994
select SND_SOC_WM8994
config SND_SOC_SMDK_WM8994_PCM
tristate "SoC PCM Audio support for WM8994 on SMDK"
depends on SND_SOC_SAMSUNG
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
select SND_SAMSUNG_PCM
projects / users / hch / configfs.git / commitdiff