ARM: dts: at91: sama7g5: Add QSPI nodes

sama7g5 embedds 2 instances of QSPI controller:
1/ OSPI0 Supporting Up to 200 MHz DDR. Octal, TwinQuad, Hyperflash
   and OctaFlash Protocols Supported.
2/ QSPI1 Supporting Up to 90 MHz DDR/133 MHz SDR.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211209123643.341892-1-tudor.ambarus@microchip.com

diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index 7039311bf6788c7660b7dd833ed08ed05ca5f5d8..eddcfbf4d22336ad9e9c46c6e35299671c2f7123 100644 (file)
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -181,6 +181,36 @@
                        clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
                };
 
+               qspi0: spi@e080c000 {
+                       compatible = "microchip,sama7g5-ospi";
+                       reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
+                       reg-names = "qspi_base", "qspi_mmap";
+                       interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+                       dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
+                              <&dma0 AT91_XDMAC_DT_PERID(40)>;
+                       dma-names = "tx", "rx";
+                       clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
+                       clock-names = "pclk", "gclk";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               qspi1: spi@e0810000 {
+                       compatible = "microchip,sama7g5-qspi";
+                       reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
+                       reg-names = "qspi_base", "qspi_mmap";
+                       interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+                       dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
+                              <&dma0 AT91_XDMAC_DT_PERID(42)>;
+                       dma-names = "tx", "rx";
+                       clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
+                       clock-names = "pclk", "gclk";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
                adc: adc@e1000000 {
                        compatible = "microchip,sama7g5-adc";
                        reg = <0xe1000000 0x200>;