spi/pxa2xx: enable multiblock DMA transfers for LPSS devices

Intel LPSS SPI controllers need to have bit 0 (disable_ssp_dma_finish) set
in SSP_REG in order to properly perform DMA transfers spanning over
multiple blocks.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 90b27a3508a65072bf8916fecea96f16ee73cbeb..c6d5b97c7240ebaed88d42d4ce67a5dabf544736 100644 (file)
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -68,6 +68,7 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 #define LPSS_TX_HITHRESH_DFLT  224
 
 /* Offset from drv_data->lpss_base */
+#define SSP_REG                        0x0c
 #define SPI_CS_CONTROL         0x18
 #define SPI_CS_CONTROL_SW_MODE BIT(0)
 #define SPI_CS_CONTROL_CS_HIGH BIT(1)
@@ -138,6 +139,10 @@ detection_done:
        /* Enable software chip select control */
        value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH;
        __lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+
+       /* Enable multiblock DMA transfers */
+       if (drv_data->master_info->enable_dma)
+               __lpss_ssp_write_priv(drv_data, SSP_REG, 1);
 }
 
 static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)