tg3: Link queues to NAPIs
Link queues to NAPIs using the netdev-genl API so this information is
queryable.
First, test with the default setting on my tg3 NIC at boot with 1 TX
queue:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8197, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'}]
Now, adjust the number of TX queues to be 4 via ethtool:
$ sudo ethtool -L eth0 tx 4
$ sudo ethtool -l eth0 | tail -5
Current hardware settings:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Despite "Combined: n/a" in the ethtool output, /proc/interrupts shows
the tg3 has renamed the IRQs to be combined:
343: [...] eth0-0
344: [...] eth0-txrx-1
345: [...] eth0-txrx-2
346: [...] eth0-txrx-3
347: [...] eth0-txrx-4
Now query this via netlink to ensure the queues are linked properly to
their NAPIs:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8960, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8961, 'type': 'rx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8962, 'type': 'rx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8963, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8960, 'type': 'tx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8961, 'type': 'tx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8962, 'type': 'tx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8963, 'type': 'tx'}]
As you can see above, id 0 for both TX and RX share a NAPI, NAPI ID
8960, and so on for each queue index up to 3.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241009175509.31753-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>