net: enetc: read TSN capabilities from port register, not SI

net: enetc: read TSN capabilities from port register, not SI

Configuring TSN (Qbv, Qbu, PSFP) capabilities requires access to port
registers, which are available to the PSI but not the VSI.

Yet, the SI port capability register 0 (PSICAPR0), exposed to both PSIs
and VSIs, presents the same capabilities to the VF as to the PF, thus
leading the VF driver into thinking it can configure these features.

In the case of ENETC_SI_F_QBU, having it set in the VF leads to a crash:

root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \
mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1
[  187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00
[  187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[  187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400
[  187.511140] Call trace:
[  187.513588]  enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[  187.518918]  enetc_setup_tc_mqprio+0x180/0x214
[  187.523374]  enetc_vf_setup_tc+0x1c/0x30
[  187.527306]  mqprio_enable_offload+0x144/0x178
[  187.531766]  mqprio_init+0x3ec/0x668
[  187.535351]  qdisc_create+0x15c/0x488
[  187.539023]  tc_modify_qdisc+0x398/0x73c
[  187.542958]  rtnetlink_rcv_msg+0x128/0x378
[  187.547064]  netlink_rcv_skb+0x60/0x130
[  187.550910]  rtnetlink_rcv+0x18/0x24
[  187.554492]  netlink_unicast+0x300/0x36c
[  187.558425]  netlink_sendmsg+0x1a8/0x420
[  187.606759] ---[ end trace 0000000000000000 ]---

while the other TSN features in the VF are harmless, because the
net_device_ops used for the VF driver do not expose entry points for
these other features.

These capability bits are in the process of being defeatured from the SI
registers. We should read them from the port capability register, where
they are also present, and which is naturally only exposed to the PF.

The change to blame (relevant for stable backports) is the one where
this started being a problem, aka when the kernel started to crash due
to the wrong capability seen by the VF driver.

Fixes: 827145392a4a ("net: enetc: only commit preemptible TCs to hardware when MM TX is active")
Reported-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>