mmc: sdhci-esdhc-imx: Implement emmc hardware reset

mmc: sdhci-esdhc-imx: Implement emmc hardware reset

NXP ESDHC supports control of native emmc reset signal when pinmux is
set accordingly, using uSDHCx_SYS_CTRL register IPP_RST_N bit.
Documentation is available in NXP i.MX6Q Reference Manual.

Implement the hw_reset function in sdhci_ops asserting reset for at
least 1us and waiting at least 200us after deassertion.
Lower bounds are based on:
JEDEC Standard No. 84-B51, 6.15.10 H/W Reset Operation, page 159.
Upper bounds are chosen allowing flexibility to the scheduler.

Tested on SolidRun i.MX8DXL SoM with a scope, and confirmed that eMMC is
still accessible after boot:
- eMMC extcsd has RST_N_FUNCTION=0x01
- sdhc node has cap-mmc-hw-reset
- pinmux set for EMMC0_RESET_B
- Linux v5.15

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241101-imx-emmc-reset-v3-1-184965eed476@solid-run.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>