Merge branch 'pci/controller/qcom'

Merge branch 'pci/controller/qcom'

- Use correct PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register for v2.7.0
  (Manivannan Sadhasivam)

- Remove "PCIE20_" prefix from register definitions (Manivannan Sadhasivam)

- Sort registers and bitfield declarations (Manivannan Sadhasivam)

- Convert to GENMASK and FIELD_PREP (Manivannan Sadhasivam)

- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 (Manivannan
  Sadhasivam)

- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 (Manivannan Sadhasivam)

- Rename qcom_pcie_config_sid_sm8250() to be non SM8250-specific
  (Manivannan Sadhasivam)

- Add DT "mhi" register region for supported SoCs (Manivannan Sadhasivam)

- Expose link transition counts via debugfs to help debug low power issues
  (Manivannan Sadhasivam)

- Support system suspend and resume; reduce interconnect bandwidth and turn
  off clock and PHY if there are no active devices (Manivannan Sadhasivam)

- Enable async probe by default to reduce boot time (Manivannan Sadhasivam)

- Add Manivannan Sadhasivam as qcom DT binding maintainer, replacing
  Stanimir Varbanov (Manivannan Sadhasivam)

- Add DT binding and driver support for Qcom SDX55 SoC (Manivannan
  Sadhasivam)

- Add DT binding and driver support for SM8550 SoC (Abel Vesa)

- Document msi-map and msi-map-mask DT properties (Manivannan Sadhasivam)

* pci/controller/qcom:
  dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
  PCI: qcom: Add SM8550 PCIe support
  dt-bindings: PCI: qcom: Add SM8550 compatible
  PCI: qcom: Add support for SDX55 SoC
  dt-bindings: PCI: qcom-ep: Fix the unit address used in example
  dt-bindings: PCI: qcom: Add SDX55 SoC
  dt-bindings: PCI: qcom: Update maintainers entry
  PCI: qcom: Enable async probe by default
  PCI: qcom: Add support for system suspend and resume
  PCI: qcom: Expose link transition counts via debugfs
  dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs
  PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version
  PCI: qcom: Use macros for defining total no. of clocks & supplies
  PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0
  PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3
  PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3
  PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2
  PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0
  PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0
  PCI: qcom: Use lower case for hex
  PCI: qcom: Add missing macros for register fields
  PCI: qcom: Use bitfield definitions for register fields
  PCI: qcom: Sort and group registers and bitfield definitions
  PCI: qcom: Remove PCIE20_ prefix from register definitions
  PCI: qcom: Fix the incorrect register usage in v2.7.0 config