]> www.infradead.org Git - users/jedix/linux-maple.git/commit
ASoC: renesas: rz-ssi: Terminate all the DMA transactions
authorClaudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tue, 10 Dec 2024 17:09:33 +0000 (19:09 +0200)
committerMark Brown <broonie@kernel.org>
Wed, 11 Dec 2024 13:23:54 +0000 (13:23 +0000)
commit541011dc2d7c4c82523706f726f422a5e23cc86f
treed32131379facf75c45b2773f494527d87081c302
parentc56078128c0afe92985c378478b0b0435062c8df
ASoC: renesas: rz-ssi: Terminate all the DMA transactions

The stop trigger invokes rz_ssi_stop() and rz_ssi_stream_quit().
- The purpose of rz_ssi_stop() is to disable TX/RX, terminate DMA
  transactions, and set the controller to idle.
- The purpose of rz_ssi_stream_quit() is to reset the substream-specific
  software data by setting strm->running and strm->substream appropriately.

The function rz_ssi_is_stream_running() checks if both strm->substream and
strm->running are valid and returns true if so. Its implementation is as
follows:

static inline bool rz_ssi_is_stream_running(struct rz_ssi_stream *strm)
{
    return strm->substream && strm->running;
}

When the controller is configured in full-duplex mode (with both playback
and capture active), the rz_ssi_stop() function does not modify the
controller settings when called for the first substream in the full-duplex
setup. Instead, it simply sets strm->running = 0 and returns if the
companion substream is still running. The following code illustrates this:

static int rz_ssi_stop(struct rz_ssi_priv *ssi, struct rz_ssi_stream *strm)
{
    strm->running = 0;

    if (rz_ssi_is_stream_running(&ssi->playback) ||
        rz_ssi_is_stream_running(&ssi->capture))
        return 0;

    // ...
}

The controller settings, along with the DMA termination (for the last
stopped substream), are only applied when the last substream in the
full-duplex setup is stopped.

While applying the controller settings only when the last substream stops
is not problematic, terminating the DMA operations for only one substream
causes failures when starting and stopping full-duplex operations multiple
times in a loop.

To address this issue, call dmaengine_terminate_async() for both substreams
involved in the full-duplex setup when the last substream in the setup is
stopped.

Fixes: 4f8cd05a4305 ("ASoC: sh: rz-ssi: Add full duplex support")
Cc: stable@vger.kernel.org
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20241210170953.2936724-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/renesas/rz-ssi.c